ESKUTE D100 Adult Electric Bike User Manual

1. Introduction

Thank you for choosing the ESKUTE D100 Adult Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new e-bike. Please read this manual thoroughly before your first ride and keep it for future reference. Ensure all users are familiar with its contents.

2. Safety Information

Your safety is paramount. Always wear a helmet and appropriate protective gear when riding. Familiarize yourself with local laws and regulations regarding electric bicycles. This e-bike is designed for adults and has a maximum speed of less than 25 km/h, compliant with many European regulations.

• Always perform a pre-ride safety check.
• Ensure brakes are functioning correctly.
• Check tire pressure before each ride.
• Be aware of your surroundings and traffic.
• Do not ride under the influence of alcohol or drugs.
• Follow all traffic laws.

3. Setup and Assembly

The ESKUTE D100 is designed for easy assembly. Some components may come pre-assembled. Follow these steps to prepare your bike for its first ride:

1. Unpacking: Carefully remove the bike and all accessories from the packaging. Retain packaging for potential future transport or returns.
2. Unfolding the Frame: If your bike is folded, release the frame latch and unfold the main frame until it locks securely into place. Ensure the latch is fully engaged.
3. Handlebar Installation/Adjustment: Insert the handlebar stem into the fork tube (if not already installed) and tighten the quick-release lever or bolts. Adjust the handlebar height and angle for a comfortable riding position. Ensure the stem is aligned with the front wheel.
4. Saddle Installation/Adjustment: Insert the seat post into the frame's seat tube. Adjust the saddle height to ensure your feet can comfortably touch the ground when stopped. Secure with the quick-release lever.
5. Pedal Installation: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Tighten them firmly with a wrench.
6. Tire Inflation: Inflate tires to the recommended pressure indicated on the tire sidewall.
7. Brake Check: Squeeze both brake levers to ensure they engage properly and stop the wheels effectively. Adjust if necessary.
8. Initial Battery Charge: Before your first ride, fully charge the battery. Connect the charger to the battery port and then to a power outlet. The charging indicator on the charger will show the charging status. A full charge typically takes 7-8 hours.

4. Operating Instructions

The ESKUTE D100 offers an intuitive riding experience with pedal assist and a clear display.

4.1 Powering On/Off

Press and hold the power button on the display unit to turn the bike's electrical system on or off.

4.2 Display Functions

The HD display provides real-time information:

• Speed: Current riding speed.
• Battery Level: Remaining battery charge.
• Distance: Trip distance and total odometer.
• Pedal Assist Level: Indicates the current level of motor assistance (typically 3 levels).

Use the '+' and '-' buttons on the display to cycle through pedal assist levels. Level 0 means no motor assistance, while higher levels provide more power.

4.3 Riding Modes

• Pedal Assist Mode: The motor provides assistance as you pedal. Choose from 3 levels of assistance.
• Manual Mode: Ride the bike like a traditional bicycle without motor assistance.

4.4 Braking

The ESKUTE D100 is equipped with 160mm mechanical disc brakes on both front and rear wheels for reliable stopping power. Squeeze the brake levers gently to slow down and firmly to stop. The brake system includes a power-off feature that cuts motor assistance when brakes are applied.

4.5 Front Suspension System

The upgraded front wheel suspension system enhances comfort and safety, absorbing shocks from uneven terrain.

4.6 Rear Rack

The robust rear rack comes with a seat cushion and can support up to 25 kg, suitable for carrying cargo or an additional passenger (within legal limits and total weight capacity).

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your ESKUTE D100 e-bike.

5.1 Battery Care

• Charge the battery fully before the first use.
• Do not allow the battery to fully discharge. Recharge after each ride or when the battery level is low.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• If storing for an extended period, charge the battery to 50-70% every 1-2 months.
• Use only the original charger provided.

5.2 Tires

• Check tire pressure regularly. Recommended pressure is usually indicated on the tire sidewall.
• Inspect tires for wear, cuts, or punctures before each ride.
• The 16*2.50" fat tires are suitable for various terrains including rural roads, asphalt, gravel, and snow.

5.3 Brakes

• Regularly check brake pads for wear and replace them when necessary.
• Ensure brake levers are responsive and provide adequate stopping power.
• Keep brake discs clean and free from oil or grease.

5.4 General Cleaning

Clean your e-bike with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components or bearings.

5.5 Fasteners

Periodically check all bolts, nuts, and quick-release levers to ensure they are securely tightened.

6. Troubleshooting

Here are some common issues and their potential solutions:

• Bike not powering on:
  • Check if the battery is properly inserted and locked.
  • Ensure the battery is charged.
  • Press and hold the power button on the display for a few seconds.
• Motor not assisting:
  • Check the pedal assist level on the display; ensure it's not set to '0'.
  • Ensure brake levers are not partially engaged (which would cut motor power).
  • Check battery charge level.
• Brakes feel weak:
  • Inspect brake pads for wear; replace if necessary.
  • Check brake cables for tension and adjust if loose.
  • Ensure brake discs are clean.
• Unusual noises:
  • Inspect for loose components (e.g., fenders, chain guard).
  • Check chain for proper lubrication and tension.

If you encounter issues not listed here or cannot resolve a problem, please contact customer support.

7. Specifications

8. User Tips

• Battery Charging: Always ensure the battery is fully charged before long rides to maximize range.
• Tire Pressure: Maintaining correct tire pressure is crucial for ride comfort, efficiency, and tire longevity. Check weekly.
• Motor Power: The ESKUTE D100 features a 250W motor, designed for legal compliance and efficient pedal assistance. This model does not come with a 500W motor option.
• Wheel Size: The bike is equipped with 16-inch wheels, providing a compact and agile ride suitable for urban environments and varied terrains.
• Storage: When storing the bike, especially for extended periods, ensure the battery is partially charged (50-70%) and stored in a cool, dry place to preserve its lifespan.
• Safety First: Always prioritize safety. Wear a helmet, obey traffic laws, and be mindful of pedestrians and other vehicles.

9. Warranty and Support

Your ESKUTE D100 Electric Bike comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact the seller or manufacturer directly.

Statement of Compliance

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.