SKYDROID G12 Remote Control User Manual

1. Introduction

The SKYDROID G12 is a high-performance remote control system designed for unmanned aerial vehicles (UAVs) and drones. It features 5.8G dual-frequency operation, 20KM digital image transmission, and a high-definition display, providing a robust and reliable control experience.

This manual provides essential information for setting up, operating, and maintaining your G12 remote control system. Please read it thoroughly before use to ensure safe and optimal performance.

2. Product Overview

The G12 remote control integrates advanced features for professional drone operation, including a powerful Android system ground station and a high-brightness display for clear visibility in various conditions.

2.1 Components

• SKYDROID G12 Remote Control Unit
• GR01 Receiver (if included in your package)
• Antennas
• Charging Cable (Type-C)

2.2 G12 Remote Control Layout

Familiarize yourself with the main components and controls of your G12 remote control.

Figure 1: Front View of G12 Remote Control

Figure 2: Back View of G12 Remote Control

2.3 GR01 Receiver

The GR01 receiver is a compact unit designed to pair with the G12 remote control for reliable signal reception on your UAV.

Figure 3: GR01 Receiver

3. Setup

3.1 Initial Charging

Before first use, ensure the G12 remote control is fully charged. Connect the provided Type-C charging cable to the remote control and a 5V/2A power adapter.

3.2 Antenna Installation

Carefully screw the two antennas onto the designated ports on the top of the G12 remote control. Ensure they are securely fastened but do not overtighten.

3.3 Powering On/Off

• To Power On: Press and hold the power button (usually located centrally on the top panel) until the screen illuminates.
• To Power Off: Press and hold the power button until a power-off prompt appears on the screen, then confirm.

3.4 Receiver Connection (GR01)

Connect the GR01 receiver to your drone's flight controller according to your drone's specific wiring diagram. Ensure proper power supply (5V-12V) to the receiver.

3.5 Binding the Remote Control and Receiver

Refer to your drone's flight controller manual for specific binding procedures. Generally, this involves putting both the remote control and receiver into binding mode. The G12 operates on 2.4GHz and 5.8GHz dual-frequency bands.

4. Operating Instructions

4.1 Android System Ground Station

The G12 runs on Android 10, providing a versatile ground station experience. You can install compatible drone control applications directly onto the device. Navigate the interface using the touchscreen and physical controls.

4.2 Image Transmission

The G12 supports 20KM wireless digital image transmission. Ensure your drone is equipped with a compatible video transmitter and camera system. The high-definition, high-brightness 7-inch IPS display (1920*1200 resolution, 1000nit brightness) provides clear real-time video feedback.

4.3 Flight Control

Use the joysticks and programmable buttons (A, B, C, D) to control your UAV. Customize button functions within your drone's control application settings.

4.4 Dual-Frequency Operation

The G12 automatically selects or allows manual selection between 2.4GHz and 5.8GHz frequencies for optimal signal stability and range, depending on environmental conditions and local regulations.

5. Maintenance

5.1 Firmware Upgrades

Regularly check the official SKYDROID website for firmware updates to ensure optimal performance and access to new features. Follow these steps for upgrading:

1. Download the latest upgrade package from the official SKYDROID website.
2. Copy the downloaded upgrade package file to the root directory of a formatted SD card.
3. Insert the SD card into the designated slot on the G12 remote control.
4. Power on the remote control.
5. Navigate to "Settings" -> "About device" -> "System update" -> "Local update" on the G12's Android interface.
6. Select the upgrade package file from the SD card and confirm the update process.
7. Wait for the upgrade to complete. The device will restart automatically once finished. Do not power off the device during the upgrade process.

5.2 Battery Care

The G12 is equipped with a 10000mAh Lithium-ion battery. To prolong battery life:

• Avoid fully discharging the battery frequently.
• Store the remote control with the battery charged to approximately 50-60% if not used for extended periods.
• Charge the battery in a cool, dry place, away from direct sunlight.

5.3 Cleaning

Use a soft, dry cloth to clean the exterior of the remote control and screen. Avoid using harsh chemicals or abrasive materials that could damage the finish or display.

6. Troubleshooting

If you encounter issues with your SKYDROID G12 remote control, consider the following common solutions:

• No Power: Ensure the battery is charged. Try charging for at least 30 minutes before attempting to power on again.
• No Signal/Poor Image Transmission:
  • Check that antennas are securely attached and oriented correctly.
  • Verify that the GR01 receiver is properly connected and powered on the drone.
  • Ensure the remote control and receiver are correctly bound.
  • Check for obstructions or strong interference sources in your operating environment.
  • Confirm that the drone's video transmitter and camera are functioning correctly.
• Unresponsive Controls:
  • Restart both the remote control and the drone.
  • Check the binding status between the remote control and receiver.
  • Ensure the drone control application on the G12 is running correctly.
• Software Glitches: Try restarting the G12. If issues persist, consider performing a firmware upgrade as described in Section 5.1.

For persistent issues, please contact SKYDROID customer support or your retailer.

7. Specifications

Detailed technical specifications for the SKYDROID G12 Remote Control and GR01 Receiver:

For a visual representation of features and specifications, refer to the comprehensive product image below:

Figure 4: SKYDROID G12 Features and Specifications Overview

8. User Tips

• Always perform a pre-flight check of all connections and battery levels on both the remote control and the drone.
• Keep the remote control's firmware updated to benefit from the latest features and bug fixes.
• When operating, maintain line-of-sight with your drone and be aware of your surroundings to avoid interference.
• Explore the Android system settings to optimize display brightness and power saving modes for extended operation.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or the official SKYDROID customer service. Keep your purchase receipt as proof of purchase.

Brand: SKYDROID

Store: AGR Drone Combo Store