1. Introduction
The HIROYASU CB-1011 is a compact and powerful Citizen Band (CB) mobile radio designed for in-vehicle use. It supports multiple CB bands across 8 countries, offering both AM and FM modulation modes with selectable high (8W) and low (4W) power output. This manual provides detailed instructions for the proper installation, operation, and maintenance of your CB-1011 radio.
2. Package Contents
Please check the box for the following items:
- 1 × HIROYASU CB-1011 CB Radio body with Microphone speaker and DC 12V Input cigarette Power Cable
- 1 × Mounting Bracket
- 1 × Microphone Hanger
- 2 × Adjusting Screws
- 4 × Screws for bracket
- 2 × Pads for bracket
- 2 × Screws
- 1 × Spare Fuse
- 1 × User Manual

3. Product Overview
The CB-1011 is designed for ease of use and portability, featuring a palm-sized form factor. It includes essential controls for communication and a clear display for channel and mode information.

Front Panel Controls:
- 1. SQ (Squelch Control) / ASQ (Automatic Squelch Switching Key): Adjusts the squelch level or toggles automatic squelch.
- 2. RFG (RF Gain Control): Adjusts the receiver's sensitivity.
- 3. A/F (AM/FM Mode Selecting / Scan Key): Switches between AM and FM modes, or initiates channel scan.
- 4. EMG (CH9, CH19 Emergency / Keypad Lock): Selects emergency channels or locks the keypad.
- 5. Power/Volume Control: Turns the unit on/off and adjusts audio volume.
- 6. LCD: Displays channel, mode, and other operational information.
Rear Panel Connections:
- 7. External Speaker Jack: For connecting an external speaker.
- 8. Antenna Jack: For connecting the CB antenna (UHF, SO239 type).
Microphone Controls:
- UP/DN Buttons: Changes channels up or down.
- Mic Keypad Lock: Locks the microphone buttons to prevent accidental changes.

4. Setup
Follow these steps to set up your HIROYASU CB-1011 radio:
4.1 Mounting the Radio
Use the provided mounting bracket and screws to securely install the radio in your vehicle. Ensure the location allows for easy access to controls and clear visibility of the display.
4.2 Power Connection
The CB-1011 is powered by a 12V car cigarette lighter. Connect the provided power cable to the radio and then plug it into your vehicle's 12V cigarette lighter socket.

4.3 Antenna Connection
Connect a suitable CB antenna (UHF, SO239 type) to the Antenna Jack on the rear of the radio. Ensure a good quality antenna is used and properly tuned for optimal performance.
4.4 Microphone Connection
Plug the microphone cable into the designated port on the front of the radio.
4.5 Initial Power On
Once all connections are secure, turn the Power/Volume control knob clockwise to power on the radio. Adjust the volume to a comfortable listening level.
5. Operating Instructions
5.1 CB Band Selection
The CB-1011 supports 8 different country CB bands. To select the appropriate band for your region:
- Turn off the radio.
- Press and hold the EMG and RFG keys simultaneously.
- While holding these keys, turn on the radio.
- The display will show the current band (e.g., EU, PL, DE, US).
- Use the A/F button to cycle through the available bands.
- Once your desired band is displayed, turn off the radio to save the setting.


5.2 Channel Selection
- Rotary Knob: Turn the main rotary knob on the right side of the radio to change channels.
- Microphone UP/DN Buttons: Use the UP and DN buttons on the microphone to quickly navigate through channels.
5.3 AM/FM Mode Selection
Press the A/F button on the front panel to switch between AM (Amplitude Modulation) and FM (Frequency Modulation) modes. The selected mode will be displayed on the LCD.
5.4 High/Low Power Select
To switch between High (PH - 8W) and Low (PL - 4W) power output:
- Turn off the radio.
- Press and hold the EMG and RFG keys simultaneously.
- While holding these keys, turn on the radio.
- The display will show the current power setting (PH or PL).
- Use the A/F button to toggle between PH and PL.
- Once your desired power setting is displayed, turn off the radio to save the setting.

5.5 Squelch (SQ) and Automatic Squelch (ASQ) Control
- Manual Squelch: Press the SQ button to enter manual squelch adjustment mode. Use the rotary knob to set the squelch level (0.0 to 9.9). A higher number requires a stronger signal to open the squelch.
- Automatic Squelch (ASQ): Press and hold the SQ button to toggle between manual squelch and automatic squelch (AQ). In ASQ mode, the radio automatically adjusts the squelch level.

5.6 RF Gain Control (RFG)
Press the RFG button to adjust the RF Gain. Use the rotary knob to set the RF Gain level. This controls the sensitivity of the receiver to incoming signals.
5.7 Emergency Channels (CH9/CH19)
Press the EMG button to quickly switch to emergency channels CH9 or CH19. Press again to return to the previous channel.
5.8 Channel Scan
Press and hold the A/F button to activate the channel scan function. The radio will scan through channels until a signal is detected. Press any button to stop scanning.
5.9 Keypad Lock
Press and hold the EMG button to lock the radio's keypad. This prevents accidental changes to settings. Repeat the action to unlock.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Connections: Periodically check all connections (power, antenna, microphone) to ensure they are secure and free from corrosion.
- Fuse Replacement: If the radio does not power on, check the fuse in the cigarette lighter plug. Replace it with the provided spare fuse if necessary.
- Storage: When not in use for extended periods, store the radio in a dry, cool place away from direct sunlight.
7. Troubleshooting
- No Power: Ensure the 12V cigarette lighter connection is secure and the vehicle's power outlet is functional. Check the fuse in the cigarette lighter plug.
- No Reception/Transmission: Verify the antenna is properly connected and tuned. Check the selected CB band and channel. Ensure the squelch level is not set too high.
- Poor Audio Quality: Adjust the volume and squelch levels. Check microphone connection.
- Keypad Unresponsive: Check if the keypad lock is activated (refer to section 5.9).
- Factory Default Reset: If experiencing persistent issues, you can perform a factory reset. Turn off the radio, then press and hold the A/F and EMG keys simultaneously while turning the radio on. This will restore all settings to their original factory defaults.
8. Specifications
| General | ||
|---|---|---|
| Modulation Mode | AM/FM | |
| Frequency Range | 26.565-27.99125MHz | |
| Frequency Tolerance | ±5.0ppm | |
| Input Voltage | 13.8V±5% | |
| Dimensions | 109*104*25mm | |
| Weight | 421g | |
| Frequency Control | PLL Synthesizer | |
| Operating Temperature Range | -20°c~+50°c | |
| Current Drain | Transmit | 2A Max. |
| Receiver (Squelched) | 0.3A | |
| Receiver (Vol Max.) | 0.8A | |
| Antenna Connector | UHF, SO239 | |
| Transmitter | ||
| Power Output | 8 Watts FM/AM | |
| Transmission Interference | Inferior to 4nW (-54dBm) | |
| Frequency Response | 300-3000Hz | |
| Modulated Signal Distortion | Inferior to 5% | |
| Output Impedance | 50 ohms | |
| Receiver | ||
| Sensitivity | Less than 1uV for 10dB (S+N)/N | |
| Image Rejection | 70dB | |
| Adjacent Channel Rejection | 60dB | |
| IF Frequency | 1st 10.695MHz | |
| 2nd 455KHz | ||
| Automatic Gain Control (AGC) | Less than 10dB change in audio | |
| Output for inputs from 10 to 50000uV | ||
| Squelch | Less than 1uV | |
| Audio Output Power | 1 Watts | |
| Frequency Response | 300-3000Hz | |

8.1 Country CB Bands Table

8.2 Frequency Tables


9. User Tips
- Antenna Tuning: For optimal range and clarity, ensure your CB antenna is properly tuned (SWR below 1.5:1) before extended use.
- Power Source: Always use a stable 12V power source. Fluctuations can affect performance or damage the unit.
- Local Regulations: Familiarize yourself with local CB radio regulations and licensing requirements in your operating area.
- Microphone Handling: Keep the microphone close to your mouth when speaking for clear transmission.
10. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.