Introduction
This manual provides comprehensive instructions for the safe and effective use of your POSEIDON V6 Tattoo Pen Kit. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance. This kit is designed for embroidery tattoos and permanent makeup applications.
Product Overview
The POSEIDON V6 Tattoo Pen Kit is a versatile tool for tattoo artists, featuring a quiet and stable motor, comfortable grip, and durable construction. It is available in various configurations, including options with or without pigment.
Kit Components (with pigment option)
- Tattoo Pen (1)
- Tattoo Wireless Power Supply (1)
- Tattoo Cartridge Needles (20)
- 5cm Black Bandage (1)
- Tattoo Clean Pad (4)
- Gloves (1 Pair)
- Tattoo Transfer Paper (4)
- Tattoo Practice Leather (1)
- Tattoo Repair Patch (1)
- Tattoo Ink Cups: Medium size (20) / Small-sized (20)
- Colors Tattoo Ink (10)
- POSEIDON Black Tattoo Ink (1)
- Blue Algae (1)
Key Features
- Quiet and stable operation with a strong movement motor.
- New hand-slip anti-slip design for comfortable and prolonged use.
- Exquisite workmanship, high hardness, and lightweight unibody design.
- Aluminum alloy protective layer at the needle cylinder interface for tight and wear-resistant connection.
- Suitable for embroidery tattoos and permanent makeup.
Visual Overview
Setup Instructions
- Assemble the Tattoo Pen:
Connect the wireless power supply to the top of the tattoo pen by twisting it securely. Ensure a firm connection to prevent interruptions during operation.
Figure 6: Attaching the wireless power supply to the tattoo pen. - Insert the Cartridge Needle:
Gently push the desired cartridge needle into the front opening of the tattoo pen until it clicks into place. Ensure it is seated correctly and securely.
- Adjust Needle Depth:
Rotate the grip of the tattoo pen to adjust the needle depth according to your preference and the specific tattooing requirements. The needle length can be adjusted from 0-4.2mm.
- Prepare for Use:
Before starting, ensure all components are clean and sterilized. Use the provided gloves and clean pads for hygiene.
For a visual guide on assembly and basic operation, please refer to the product demonstration video below.
Operating Instructions
- Power On/Off:
Press and hold the power button on the wireless power supply to turn the device on or off. The display will show the current voltage.
- Adjust Voltage:
Use the '+' and '-' buttons on the wireless power supply to increase or decrease the voltage. The recommended operating voltage range is 4-12V. Adjust the voltage based on the needle type, skin type, and desired effect.
Figure 7: Adjusting voltage on the wireless power supply. - Begin Tattooing:
Once the desired voltage and needle depth are set, you can begin tattooing. Always practice on the provided practice leather before working on actual skin.
Maintenance
- Cleaning: After each use, disassemble the tattoo pen and thoroughly clean all reusable components. Use appropriate sterilization solutions for the pen body and dispose of used needles and ink cups properly.
- Storage: Store the tattoo pen and power supply in a clean, dry place, preferably in its original carrying case, away from direct sunlight and extreme temperatures.
- Needle Disposal: Always dispose of used tattoo needles in a designated sharps container to prevent injury and contamination.
Troubleshooting
- Machine Not Turning On: Ensure the wireless power supply is fully charged and securely connected to the tattoo pen.
- Inconsistent Needle Movement: Check if the cartridge needle is properly seated. Ensure the power supply is providing stable voltage.
- Excessive Vibration/Noise: This could indicate a loose component or an issue with the motor. Disassemble and reassemble the pen, ensuring all parts are tight. If the issue persists, contact support.
Specifications
| Feature | Specification |
|---|---|
| Product Model | HM161 (POSEIDON V6) |
| Material | Aluminum Alloy |
| Voltage Range | 4-12V |
| Starting Voltage | 8V |
| Working Frequency | 8000 RPM |
| Stroke | 4.0mm |
| Needle Length Adjustment | 0-4.2mm |
| Motor | 8V 8000RPM |
| Is Batteries Included | Yes |
| Origin | Mainland China |
User Tips
- Always perform a patch test with new inks on practice skin before using on clients.
- Ensure proper hand hygiene and wear new gloves for each session.
- Familiarize yourself with local regulations and safety standards for tattooing.
- Regularly check the needle for any damage or dullness to ensure optimal performance and client safety.
Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference.
