1. Introduction
Thank you for choosing the FMS FCX24M Turn Signal Light Upgrade Kit. This accessory adds realistic turn signal functionality to your compatible FMS 1/24 scale RC crawler, improving its visual appeal and operational realism. The lights are designed to synchronize with your vehicle's steering input, providing an immersive experience.
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always ensure the RC vehicle's power is off before installing or performing maintenance on the light kit.
- Keep small parts away from children to prevent choking hazards.
- Handle wiring carefully to avoid damage.
- This product is recommended for users aged 14 years and older.
3. Package Contents
Verify that all components are present before beginning installation:
- 1x FMS FCX24M Turn Signal Light Kit (includes LED lights, control board, and wiring harness)
Visual Reference:


4. Specifications
| Feature | Detail |
|---|---|
| Model Number | FCX24M |
| Material | Plastic (ABS) |
| Quantity | 1 pcs |
| Power Source | No Battery (Powered by RC car's receiver) |
| For Vehicle Type | Cars (FMS 1/24 FCX24M Range Rover, Discovery, Defender 110/90) |
| Upgrade Type | Car Shell, Connectors/Wiring |
| Recommended Age | 14+ years |
5. Setup and Installation
Follow these steps to install the turn signal light kit:
- Prepare the RC Car: Carefully remove the body shell of your FMS FCX24M RC car to access the chassis and electronics. Ensure the vehicle's power is completely off.
- Locate Light Holes: Identify the designated turn signal light holes on the front and rear of your RC car's body shell. These are typically small, clear or amber-colored lenses.
- Insert LEDs: Gently insert the small LED lights from the kit into the corresponding turn light holes on the car body. Ensure they are securely seated.
- Connect Wiring Harness: Refer to Figure 3.2 for wiring connections.
- Connect the labeled