1. Introduction
The TELESIN P4-WTP-06 is a professional-grade underwater diving phone waterproof case designed to transform your smartphone into a powerful underwater photography and videography tool. With its robust IP68 waterproof rating, it allows you to capture stunning visuals up to 20 meters (65 feet) deep. The integrated handle and five-key precise control system provide a comfortable and intuitive shooting experience, mimicking a DSLR grip. This manual provides essential information for the safe and effective use of your diving case.
2. Package Contents
Please check the box to ensure all items are present:
- Diving handle × 1
- USB charging cable × 1
- Mirror cloth × 1
- Vacuum pump × 1
- Safety hand strap × 1
- Instruction manual × 1
3. Specifications
| Model Number | P4-WTP-06 |
| Brand Name | TELESIN |
| Material | ABS/PC/Aluminum Alloy |
| Dimensions (L×W×H) | 20.37 × 10.92 × 5.2 cm (8.01 × 4.29 × 2.04 inches) |
| Weight | 397g |
| Waterproof Rating | IP68, up to 20 meters (65ft) underwater |
| Phone Compatibility | 5.4-6.9 inch straight screen phones (clamping range 50-80mm) |
| Bluetooth Adaptation | iOS, Android |
| Expansion Interface | Universal 1/4 screw holes × 2 |
| Battery Specification | 80mAh 3.7V |
| Charging Method | Pogo Pin |
| Charging Duration | 2 hours |
| Window Light Transmittance | 97% |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
4. Setup Guide
- Prepare your Phone: Ensure your phone is within the compatible size range (5.4-6.9 inches). For best shooting results, it is recommended to remove any phone cases or shells before installation.
- Charge the Diving Case: Connect the provided USB charging cable to the Pogo Pin port on the diving handle. A full charge takes approximately 2 hours.
- Insert Phone: Before installing your phone into the casing, open your phone's camera application and ensure the screen is on. Carefully insert your phone into the case, ensuring it is properly seated and aligned with the camera window.
- Secure the Case: Close the case securely, ensuring all five-fold seal buckles are properly latched to maintain the IP68 waterproof rating.
- Bluetooth Pairing: The diving case uses Bluetooth for remote control. Activate Bluetooth on your phone and pair it with the TELESIN diving case. This replaces traditional mechanical buttons for seamless operation.
- Vacuum Seal (Optional, Recommended): Use the included vacuum pump to create a vacuum seal within the case. This helps prevent fogging and ensures maximum waterproof integrity. Locate the vacuum exhaust port on the case and follow the pump instructions to remove air.
5. Operating Instructions
The TELESIN diving case features a five-key precise control system designed for intuitive underwater operation:
- Shutter/Pause Button: The main button (often red/orange) is used to take photos or start/stop video recording.
- Mode Keys (M): Use these keys to switch between different camera modes (e.g., Photo, Video, Slow-motion). There are typically two mode keys for navigation.
- Zoom Buttons (W/T): The 'W' button is for Wide-angle (zoom out), and the 'T' button is for Telephoto (zoom in).
Advanced Button Functions:
- Switch Front/Rear Camera: Press and hold a specific button (refer to the diagram, usually one of the mode keys) for 2 seconds to switch between the front and rear cameras.
- Wake Up Camera: If your phone's camera goes to sleep, press a specific button (refer to the diagram) for 2 seconds to wake it up.
Important Notes:
- Button Resistance: The buttons are designed with greater resistance in non-water environments. This is intentional to prevent accidental touches due to water pressure when operating underwater.
- Samsung Phone Users: If your Samsung phone's camera mode only offers Photo/Video/More, switching the mode key to "More" may prevent switching back via the mode key. In this specific scenario, press the shutter button once to return to the previous mode.
- Underwater Depth: The case is fully waterproof up to 20 meters (65 feet) deep. Ensure you do not exceed this depth.
- Bluetooth Stability: The Bluetooth signal remains stable and penetrates up to 20 meters deep, ensuring uninterrupted shooting.
6. Maintenance
- Cleaning: After each use, especially in saltwater, rinse the exterior of the case thoroughly with fresh water. Use the provided mirror cloth to gently clean the lens and transparent panel to ensure optimal clarity for future use.
- Drying: Allow the case to air dry completely before storing. Ensure no water remains in the seals or crevices.
- Internal Cleaning: The inner shell of the diving case is NOT waterproof. Do not rinse the inner shell with water, as this may damage the internal circuitry.
- Storage: Store the diving case in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Recharge the internal battery as needed. Avoid fully discharging the battery for extended periods to prolong its lifespan.
7. Troubleshooting
- Issue: Fogging inside the case.
- Solution: Use the vacuum pump during setup to remove air from the case. This creates a vacuum seal that effectively prevents fogging. Ensure the case is completely dry before sealing.
- Issue: Buttons are difficult to press or unresponsive.
- Solution: The buttons are designed with higher resistance out of water. Ensure you are pressing firmly. If underwater, the resistance should feel more natural. If still unresponsive, check Bluetooth connection and battery level.
- Issue: Cannot switch back from 'More' mode on Samsung phones.
- Solution: As noted in the operating instructions, if your Samsung camera app is in 'More' mode and the mode key doesn't switch back, simply press the shutter button once to return to a standard photo/video mode.
- Issue: Bluetooth connection unstable or disconnected.
- Solution: Ensure the diving case is charged. Re-pair the Bluetooth connection with your phone. Keep the phone and case within the effective Bluetooth range (up to 20 meters underwater).
8. User Tips
- Pre-Dive Check: Always perform a dry run before taking the case underwater. Insert your phone, seal the case, and test all buttons and functions to ensure everything is working correctly.
- Remove Phone Case: For the best fit and optimal shooting performance, always remove your phone's protective case before inserting it into the diving handle.
- Screen On During Installation: Ensure your phone's camera app is open and the screen is active when inserting it into the case to facilitate immediate control.
- Use Vacuum Pump: Regularly use the vacuum pump to prevent fogging, especially in environments with significant temperature differences.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official TELESIN website or contact your retailer. Keep your purchase receipt as proof of purchase.