Introduction
The TELESIN P4-WTP-06 Diving Photography Case is a high-quality, universal waterproof phone shell designed to enable underwater photography and videography with your smartphone. Featuring Bluetooth control and a robust waterproof design, it allows you to capture stunning visuals up to 20 meters (65 feet) deep. This manual provides essential information on setup, operation, maintenance, and specifications to ensure safe and effective use of your device.
Package Contents
Please check the box for the following items:
- Diving handle × 1
- USB charging cable × 1
- Mirror cloth × 1
- Vacuum pump × 1
- Safety hand strap × 1
- Instruction manual × 1

Setup
Charging the Device
Connect the provided USB charging cable to the Pogo Pin charging port on the diving handle. A full charge takes approximately 2 hours. The internal battery specification is 80mAh 3.7V.
Phone Compatibility and Installation
The diving case is compatible with straight-screen phones under 7 inches, specifically supporting phone sizes between 5.4 and 6.9 inches. The clamping range is 50-80cm.

Figure 2: Phone Compatibility (5.4-6.9" screen size) Important: For optimal performance and a secure fit, it is highly recommended to remove your phone's protective case or shell before installing it into the diving photography case. This equipment only supports bare metal installation.
Before installing your phone into the casing, ensure your phone's camera application is open and the screen is on. Carefully insert your phone into the case, ensuring it is properly seated and secured.
Bluetooth Pairing
The diving case uses Bluetooth for direct connection to your smartphone, replacing traditional mechanical buttons for stable control. It adapts to both iOS and Android operating systems.
To pair, ensure Bluetooth is enabled on your phone. The device should appear in your phone's Bluetooth settings. Select it to connect. Once connected, you can control your phone's camera functions via the case's buttons.

Figure 3: Bluetooth Direct Connection for Stable Control
Operating Instructions
Underwater Use
The TELESIN Diving Photography Case is fully waterproof up to 20 meters (65 feet) deep, with an IP68 certification and a five-fold seal buckle for maximum protection.

Figure 4: Waterproof Depth up to 20 meters (65ft) Five-Key Precise Control
The case features a five-key control system designed specifically for underwater use, restoring phone shooting mode functionality. The buttons have greater resistance in non-water environments, which is a specially designed button force, making it easier to operate underwater and prevent accidental touches due to water pressure.
- Shutter/Pause button: 1 button for capturing photos or starting/stopping video recording.
- Mode key: 2 buttons for switching between different camera modes.
- Zoom button (W/T): 2 buttons for zooming in (T) and out (W).

Figure 5: Five-Key Precise Control Layout Advanced Button Functions:
- Switch between front and rear camera in 2 seconds.
- Wake up camera from sleep in 2 seconds.
Samsung Phone Specific Note
For Samsung models, if the camera mode only offers "Photo/Video/More", switching the mode key to "More" may prevent switching back via the mode key. In this specific scenario, press the shutter button once to return to the previous mode.
Color Correction (App Feature)
The TELESIN Diving Photography Case supports professional color correction with one-click automatic compensation via a dedicated application. This app is expected to be launched at the end of July. Please follow the latest information from TELESIN for app availability and usage instructions.

Figure 6: Professional Color Correction via App
Maintenance
Preventing Fogging
The diving case is equipped with a vacuum exhaust port to help prevent fogging inside the case, ensuring clear visibility for your underwater shots.

Figure 7: Vacuum Exhaust Port for Anti-Fogging Cleaning
After each use, especially in saltwater, rinse the exterior of the diving case with fresh water. Use the provided mirror cloth to gently clean the lens and transparent panel to avoid scratches and ensure optimal image quality.
Storage
Store the diving case in a cool, dry place away from direct sunlight. Ensure the case is completely dry before storage.
Important Warning
The inner shell of the diving case is NOT waterproof. Do not rinse the inner shell directly with water, as this may damage the internal circuitry.
Troubleshooting
Bluetooth Connectivity Issues
If the device fails to connect via Bluetooth, ensure the diving case is charged, Bluetooth is enabled on your phone, and the case is within range. Try unpairing and re-pairing the device. If issues persist, restart both your phone and the diving case.
Buttons Not Responding
Check if the phone is properly seated within the case and if the camera app is active. Ensure the case's battery is charged. If using a Samsung phone, refer to the "Samsung Phone Specific Note" in the Operating Instructions section.
Fogging Inside the Case
Ensure the vacuum exhaust port is clear and functioning. Make sure the case is properly sealed before submerging. Using anti-fog inserts (not included) can also help in humid conditions.
Specifications
| Feature | Specification |
|---|---|
| Model Number | P4-WTP-06 |
| Material | ABS/PC/Aluminum Alloy |
| Dimensions (L×W×H) | 20.37 × 10.92 × 5.2 cm (8.01 × 4.29 × 2.04 inches) |
| Weight | 397g |
| Waterproof Rating | IP68, ≤ 20 meters (65 feet) underwater |
| Phone Compatibility | Under 7-inch straight screen phones (5.4-6.9 inches), Clamping range 50-80cm |
| Bluetooth Adaptation | iOS, Android |
| Battery Specification | 80mAh 3.7V |
| Charging Method | Pogo Pin |
| Charging Duration | 2 hours |
| Expansion Interface | Universal 1/4 screw holes × 2 |
| Transparent Panel | 8-inch fully transparent, 97% light transmittance |
| Lens Window | 4.4-inch |

Warranty and Support
For warranty information and technical support, please refer to the official TELESIN website or contact your retailer. Keep your purchase receipt as proof of purchase.