BEITIAN BK-609U

Contents

Beitian BK-609U GNSS Receiver User Manual

Model: BK-609U / BE-609U

Brand: BEITIAN

1. Introduction

The Beitian BK-609U is a high-sensitivity USB GNSS receiver module designed for precise positioning. It supports multiple global navigation satellite systems including GPS, BDS, GLONASS, and Galileo. Featuring a magnetic bottom for easy mounting and an LED indicator for status, this receiver is compatible with various applications requiring accurate location data.

Beitian GNSS Receiver with features highlighted
Beitian GNSS Receiver highlighting LED light, GPS+BDS support, high sensitivity with magnetic suction, and USB interface.
Product overview video demonstrating the Beitian GNSS Receiver.

2. Setup

2.1 Package Contents

  • Beitian BK-609U GNSS Receiver
  • Integrated USB Cable

2.2 Driver Installation

The GNSS receiver requires a PL2303SA chipset driver for data communication. This driver supports Windows, Linux, CE, and other systems. For Windows, follow these steps:

  1. Download the Driver: Obtain the PL2303SA UART-USB Windows driver from the official Prolific website: PL2303_Prolific_DriverInstaller_v1200.zip
  2. Run the Installer: Extract the downloaded ZIP file and run the PL2303-Prolific_DriverInstaller_v1200.exe.
  3. Follow On-Screen Prompts: The InstallShield Wizard will guide you through the installation process. Click 'Next' to proceed.
  4. Complete Installation: Once the installation is successful, click 'Finish' to exit the wizard.
Beitian GNSS Receiver with USB cable
The Beitian GNSS Receiver with its integrated USB cable.

2.3 Physical Connection

Connect the USB 2.0 male connector of the GNSS receiver to an available USB port on your computer or device. The receiver features a magnetic bottom for secure placement on metallic surfaces.

Beitian GNSS Receiver showing USB connection
Side view of the Beitian GNSS Receiver connected via USB.

2.4 LED Indicator

  • Blue Light: Flashes when the device is powered on and actively outputting data.
  • Red Light: Flashes after achieving a 3D position fix. If not positioned, the light remains off.

3. Operation

Once connected and drivers are installed, the receiver will begin searching for satellite signals. Ensure the receiver has a clear view of the sky for optimal performance.

3.1 Data Output Protocol

The receiver outputs data using NMEA and UBX protocols. The default NMEA messages include RMC, VTG, GGA, GSA, GSV, and GLL.

3.2 Update Rate

The data update rate is configurable from 0.25Hz to 25Hz, with a default setting of 1Hz.

3.3 FLASH Memory

The receiver includes FLASH memory, allowing configuration settings to be saved even after power loss.

3.4 Second Pulse Output

The second pulse output is configurable from 0.25 Hz to 10 MHz. The default period is 1 second, with the high level lasting for 100ms.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the receiver. Avoid abrasive cleaners or solvents.
  • Environmental Conditions: Keep the device dry and avoid exposing it to extreme temperatures or humidity.
  • Cable Care: Handle the USB cable gently to prevent damage.

5. Troubleshooting

5.1 No Power / No LED Indication

  • Ensure the USB cable is securely connected to both the receiver and the host device.
  • Verify that the USB port on the host device is functional and providing power.

5.2 No Data Output (Blue LED not flashing)

  • Confirm that the PL2303SA driver is correctly installed on your operating system.
  • Check the device manager (Windows) to ensure the receiver is recognized as a COM port without errors.
  • Verify that your application software is configured to communicate with the correct COM port and baud rate (default 115200bps).

5.3 Poor Positioning Accuracy / No 3D Fix (Red LED not flashing)

  • Ensure the receiver has a clear, unobstructed view of the sky. Avoid placing it indoors, under dense foliage, or near tall buildings.
  • Minimize interference from other electronic devices.
  • Allow sufficient time for the receiver to acquire satellites (Cold Start: 24s, Warm Start: 2s, Hot Start: 2s).

5.4 User Tips

  • For best performance, place the receiver on a stable, flat surface with the top facing upwards.
  • Utilize the magnetic bottom for convenient mounting in vehicles or on other metallic surfaces.
  • If experiencing issues, try connecting the receiver to a different USB port or computer to rule out port/system specific problems.

6. Specifications

FeatureDescription
Model NameBK-609
Brand NameBEITIAN
ChipsetM9140-KB
GPS TypeReceiver & Antenna
FrequencyGPS L1 C/A, QZSS L1 C/A/S, GLONASS L1OF, BDS B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
Receiving FormatGPS, GLONASS, BDS, GALILEO
Auxiliary SystemSBAS, QZSS
Channels92 Searching Channel
Tracking Sensitivity-167dBm
Reacquisition Sensitivity-160dBm
Cold Start Sensitivity-148dBm
Hot Start Sensitivity-159dBm
Position Horizontal Accuracy1.5 m CEP
Velocity Accuracy0.05m/s
Dynamic Heading Accuracy0.3 deg
1PPS Time AccuracyRMS 30ns, 99% 60ns
Cold Start Acquisition Time24s
Warm Start Acquisition Time2s
Hot Start Acquisition Time2s
Support Rate (Baud Rate)4800bps - 921600bps (default 115200bps)
Data LevelTTL Level (PL2303SA chip), USB level
Data ProtocolNMEA, UBX
NMEA Message TypesRMC, VTG, GGA, GSA, GSV, GLL
Update Rate0.25Hz-25Hz (default 1Hz)
FLASHConfiguration can be changed and saved
Second Pulse0.25 Hz to 10 MHz configurable (default 1s, high level 100ms)
Operational Altitude Limit80,000m
Operational Velocity Limit500m/s
Operational Acceleration Limit≤4g
VCC (Input Voltage)DC 3.6V-5.5V (Typical: 5.0V)
Current Consumption45mA/5.0V
DimensionΦ63.2*16.8mm
Weight95g
ConnectorUSB 2.0 male
Cable Length2m
Fixed MethodMagnetic bottom
Operating Temperature-40°C ~ +85°C
Storage Temperature-40°C ~ +105°C

6.1 Pin Description

PINNameI/ODescription
1VCCIDC 3.6 V-5.5V supply input, Typical: 5.0V
2D-OUSB D-
3D+IUSB D+
4GNDGGround
Beitian GNSS Receiver top view
Top view of the Beitian GNSS Receiver.

7. Warranty and Support

For detailed technical specifications, advanced configurations, and troubleshooting, please refer to the comprehensive user manual PDF available at: Beitian BK-609U GNSS Receiver Datasheet (PDF).

If you encounter any issues not covered in this manual or require further assistance, please contact the manufacturer's support channel.

© 2023 BEITIAN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.