ANDELI RL-600

Contents

ANDELI True Color Auto-Darkening Welding Helmet

Model: RL-600

1. Introduction

Thank you for choosing the ANDELI True Color Auto-Darkening Welding Helmet, Model RL-600. This instruction manual provides essential information for the safe and effective use, setup, operation, and maintenance of your welding helmet. Please read this manual thoroughly before operating the helmet and retain it for future reference.

The ANDELI RL-600 is designed to provide superior eye and face protection during welding, cutting, and grinding operations. It features advanced true color technology, a wide viewing area, digital controls, and a comfortable, lightweight design.

2. Safety Information

WARNING: Welding, cutting, and grinding processes can be hazardous and may cause serious injury or death. Always follow all applicable safety regulations and guidelines.

  • Always wear appropriate personal protective equipment (PPE) in addition to the welding helmet, including safety glasses, protective clothing, and gloves.
  • Inspect the helmet and all its components (shell, headgear, lenses) for any damage before each use. Do not use the helmet if any part is damaged.
  • Ensure the helmet is correctly adjusted for a secure and comfortable fit to prevent it from falling off or shifting during operation.
  • Avoid direct exposure to the welding arc without proper eye protection. The auto-darkening filter is designed to protect your eyes, but it must be functioning correctly.
  • Ensure adequate ventilation in your work area to avoid inhaling hazardous fumes and gases.
  • Do not modify the helmet or its components. Use only genuine replacement parts.
  • Keep the helmet clean and free from dirt, dust, and moisture to ensure optimal performance and longevity.

3. Package Contents

Verify that all items listed below are included in your package:

  • 1 x ANDELI True Color Auto-Darkening Welding Helmet (Model RL-600)
  • 3 x Replacement External Protective Lenses
  • 1 x Storage Bag
  • 1 x Type-C Charging Cable
  • 1 x User Manual (this document)
Package contents and specifications for ANDELI RL-600 welding helmet
Figure 3.1: Package Contents and Specifications Overview

4. Product Features

  • True Color Technology: Provides a clear and natural view of the workpiece, reducing eye strain and improving visibility. Optical Class: 1/1/1/2.
  • Wide Viewing Area: 4.53" x 3.23" main viewing area with 180° panoramic side views for enhanced situational awareness.
  • Fast Auto-Darkening: Switches from light to dark in 0.07ms (1/15000s) upon arc strike, protecting your eyes instantly. Equipped with 4 independent arc sensors for reliable detection, even at low 5A TIG welding currents.
  • Digital Controls: Precise digital adjustment for shade level, sensitivity, and delay time.
  • Multi-Mode Operation: Dedicated modes for Grinding (DIN 4), Cutting (DIN 5-9), Welding (DIN 9-13), and a Lock Mode (DIN 5-13).
  • Rechargeable Battery: Integrated 500mAh lithium polymer battery, rechargeable via Type-C port, offering up to 1000 hours of runtime on a single charge. Eliminates the need for frequent button battery replacements.
  • Lightweight Design: Weighs approximately 600g (1.3 lbs) for reduced neck strain during extended use.
  • Comfortable Headgear: Ergonomically designed 6-point adjustable headgear with cushioned contact points for all-day comfort and pressure distribution. Features adjustable tightness, view angle, and mask position.
  • Advanced Lens Protection: Multi-layer lens system including 2 layers of LCD glasses and 1 layer of optical filter for comprehensive UV/IR protection up to Shade DIN16 at all times.
Overview of ANDELI welding helmet features including 180-degree panoramic view, Type-C charging, 4 arc sensors, 1/1/1/2 optical class, lightweight design, and 6-point headgear.
Figure 4.1: Key Features of the ANDELI RL-600
Comparison image showing the visual clarity difference between a traditional welding lens (unclear green tint) and the ANDELI True Color lens (clear, natural color view) with 1/1/1/2 optical clarity.
Figure 4.2: True Color Lens vs. Traditional Lens
Exploded view of the premium welding helmet lens structure, showing internal protective lens, LCD shading layer, UV/IR filter, lens frame, side view, and outside lens cover, emphasizing 2-layer LCD glasses and 1-layer optical filter.
Figure 4.3: Multi-Layer Lens System

5. Setup and Adjustment

5.1 Headgear Adjustment

Proper headgear adjustment is crucial for comfort and safety. The RL-600 features a 6-point adjustable headgear system:

  1. Cushioned Front: Ensures comfort against the forehead.
  2. Front/Back Adjustment: Use the knob to adjust the distance between the helmet and your face.
  3. Adjustable Top Strap: Adjust the strap over the top of your head for vertical positioning.
  4. Widen Rear Headbands: Provides stability and support at the back of the head.
  5. Cushioned Back: Adds comfort to the rear of the head.
  6. Cushioned Side: Provides lateral comfort.
  7. Tightness Adjustment Knob: Rotate the knob at the back to adjust the overall tightness of the headgear around your head.
Diagram illustrating the 6-point headgear for all-day comfort, highlighting cushioned front, front/back adjustment, adjustable top strap, widen rear headbands, cushioned back, cushioned side, and tightness adjustment knob.
Figure 5.1: Headgear Adjustment Points
Detailed view of the headgear adjustment features including angle adjustment, adjustable tightness, left/right detachable knobs, and 3-level front/back adjustment.
Figure 5.2: Detailed Headgear Adjustments

5.2 Charging the Battery

The helmet is powered by a 500mAh lithium polymer battery and solar cells. For initial use or if the battery is low, charge the helmet using the provided Type-C charging cable.

  1. Locate the Type-C charging port on the helmet.
  2. Connect the Type-C cable to the helmet and a suitable USB power source (e.g., wall adapter, computer USB port).
  3. The battery indicator light will flash during charging. Once fully charged, the light will remain steady or turn off (refer to specific indicator behavior on the helmet).
Image detailing the 500mAh lithium polymer rechargeable battery with Type-C charging, indicating 1000 hours runtime on a single charge and the elimination of traditional button batteries.
Figure 5.3: Type-C Charging Port

6. Operation

6.1 Control Panel Overview

The helmet features a digital control panel for precise adjustments. Refer to Figure 6.1 for the layout of the controls.

Detailed view of the welding lens controls, showing the 4.53
Figure 6.1: Digital Control Panel

6.2 Power On/Off and Grind Mode Switch

The helmet is equipped with a dedicated 'GRIND ON/OFF' button on the side for quick access:

  • Long Press: Press and hold the 'GRIND ON/OFF' button to power the helmet on or off.
  • Short Press: A short press of the 'GRIND ON/OFF' button quickly switches the helmet to Grind Mode (DIN 4).

6.3 Mode Selection (Grind, Cut, Weld, Lock)

Use the 'MODE HOLD/M' button and the +/- adjustment knob to select the desired operating mode:

  1. Short press the 'MODE HOLD/M' button to cycle through modes: GRIND, CUT, WELD, LOCK.
  2. Once a mode is selected, use the '+' and '-' buttons on the main control panel to adjust the shade level within that mode.
Diagram showing the multi-mode functionality of the helmet, including Grind Mode (DIN 4), Cut Mode (DIN 5-9), Weld Mode (DIN 9-13), and Lock Mode (DIN 5-13).
Figure 6.2: Multi-Mode Operation

6.4 Shade Control

The shade level can be adjusted digitally for different welding processes and light conditions.

  • In WELD mode, use the '+' button to increase the shade level (up to DIN 13) and the '-' button to decrease it (down to DIN 9).
  • In CUT mode, the shade range is DIN 5-9.
  • In GRIND mode, the shade is fixed at DIN 4.

6.5 Sensitivity Adjustment

The sensitivity determines how easily the helmet detects the welding arc and darkens. It can be digitally adjusted to 5 levels.

  • Press the 'SENSI.' button on the control panel.
  • Use the '+' and '-' buttons to adjust the sensitivity from low (for high current welding, e.g., 160A) to high (for low current welding, e.g., 30A).

6.6 Delay Time Control

The delay time controls how long the lens remains dark after the welding arc extinguishes. This prevents eye fatigue from afterglow.

  • Press the 'DELAY' button on the control panel.
  • Use the '+' and '-' buttons to adjust the delay time from minimum (0.1s) to maximum (1.0s) across 5 adjustable levels.

6.7 Self-Check Function

The helmet includes a self-check function to ensure the auto-darkening lens is working correctly.

  • Press the 'TEST' button on the control panel. The lens should momentarily darken and then return to its light state, indicating proper function.
Video 6.1: ANDELI OPTIM Series Welding Helmet Features and Operation Demonstration. This video showcases the digital lens, Type-C charging, lightweight design, multiple safety protections, true color auto-darkening, self-check function, mode switching (grinding, cutting, welding, locking), delay time control, sensitivity control, and headgear adjustments.

7. Maintenance

7.1 Cleaning

  • Helmet Shell: Clean the helmet shell with mild soap and water. Avoid harsh solvents or abrasive cleaners.
  • Protective Lenses: Gently wipe the inner and outer protective lenses with a soft, clean cloth. Replace scratched or pitted lenses immediately to maintain clear vision and protection.
  • Auto-Darkening Filter: Do not immerse the auto-darkening filter in water or cleaning solutions. Wipe gently with a soft, dry cloth.
  • Solar Panel: Keep the solar panel on the front of the helmet clean to ensure efficient charging and operation.

7.2 Storage

Store the welding helmet in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided storage bag to protect it from dust and scratches.

8. Troubleshooting

ProblemPossible CauseSolution
Lens does not darken when arc is struck.Low battery; Sensors blocked; Incorrect sensitivity setting; Helmet not powered on.Charge the battery; Clean sensors; Adjust sensitivity; Power on the helmet.
Poor visibility through the lens.Dirty or scratched protective lenses; Incorrect shade setting.Clean or replace protective lenses; Adjust shade level.
Helmet feels uncomfortable or loose.Headgear not properly adjusted.Re-adjust the 6-point headgear for a snug and comfortable fit.
Lens flickers during welding.Low battery; Sensitivity too low; Arc sensors partially blocked.Charge the battery; Increase sensitivity; Ensure sensors are clear.

9. Specifications

FeatureSpecification
Model NumberRL-600
Viewing Size4.53" x 3.23" (Main Lens) + 2 Side Views (without auto darkening)
True ColorYes
Optical Class1/1/1/2
Light StateDIN 3.0
Dark StatesDIN 5-9 / DIN 9-13 (Adjustable)
Auto Darkening Time0.07ms (1/15000s)
Delay Time0.1 - 1.0s (Adjustable)
UV-IR ProtectionUp to Shade DIN16 at all times
Power SourceSolar cells with 500mAh Lithium Polymer Battery, Type-C Charging
Operating Temperature-5°C to +55°C (23°F to 131°F)
WeightApprox. 600g (1.3 lbs)
Helmet MaterialPA
CertificationCE

10. User Tips

  • Optimal Visibility: Regularly check and clean the inner and outer protective lenses to maintain clear vision. Replace them if they become scratched or pitted.
  • Adjust Settings: Experiment with sensitivity and delay settings to find what works best for your specific welding process and ambient lighting conditions. Higher sensitivity is generally better for low-amp TIG welding.
  • Solar Charging: Keep the helmet's solar panel clean and exposed to light when not in use to ensure the internal battery remains charged.
  • Comfort First: Take the time to properly adjust the headgear. A well-fitted helmet reduces fatigue and improves safety.

11. Warranty and Support

ANDELI products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please contact your retailer or the official ANDELI customer service. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.