PHYEE 16P2RNMGN2ISOWCDINANT

Contents

PHYEE ISO Wiring Harness and CAN Bus Decoder User Manual

Model: 16P2RNMGN2ISOWCDINANT

Brand: PHYEE

Introduction

This user manual provides detailed instructions for the installation, operation, and maintenance of your PHYEE ISO Wiring Harness with CAN Bus Decoder. This product is designed to facilitate the integration of an Android car radio system into specific Renault models, ensuring compatibility with existing vehicle features such as steering wheel controls and door status display. Please read this manual carefully before installation and use.

Specifications

AttributeValue
Item Weight0.12kg
Model Name16P2RNMGN2ISOWCDINANT
Voltage12 V
Brand NamePHYEE
OriginMainland China
Item TypeCables, Adapters & Sockets
MaterialCopper
ISO ConnectorYes
16 Pin PlugYes
CAN Bus DecoderYes
Suitable Car Radio TypeAndroid System with 16 Pin Connector
PCB includedYes
High-concerned chemicalNone

Compatibility

This wiring harness and CAN Bus decoder are compatible with the following Renault car models:

  • Renault Megane Mk2 phase 2 (2005-2008)
  • Renault Clio Mk3 (2005-2012)
  • Renault Kangoo (2009)

Important: The original car radio connector must be an ISO type. The new radio must be an Android system with a 16-pin socket and an 8-pin CAN Bus socket.

Diagram showing original radio ISO connector and 24-pin connector
Figure 1: Original radio ISO connector and 24-pin connector. Ensure your car's original radio matches this configuration.

Package Contents

The package includes the following items:

  • Harness adapter (1 piece)
  • CAN Bus decoder (1 piece)
  • DIN antenna adapter (1 piece)
Overview of the ISO Wiring Harness, CAN Bus Decoder, and DIN antenna adapter
Figure 2: Overview of the complete wiring harness kit, including the ISO wiring harness, CAN Bus decoder, and DIN antenna adapter.

Setup and Installation

Before beginning installation, please watch the product video for a visual guide to the components.

Video 1: Demonstration of the ISO Wiring Harness and CAN Bus Decoder components.

Component Identification

CAN Bus decoder and 8 pin connector
Figure 3: Close-up view of the CAN Bus decoder module and its 8-pin connector, which integrates with the main harness.
Rear view of an Android head unit connected to the wiring harness and CAN Bus decoder
Figure 4: Example of an Android head unit connected to the wiring harness and CAN Bus decoder, showing the various connections.

Wiring Diagram (16-Pin Connector)

Detailed wiring diagram for the 16-pin connector
Figure 5: Detailed wiring diagram for the 16-pin connector, illustrating the function of each wire.

The 16-pin connector has the following pin assignments:

  • White: Front speaker L+
  • White/black striped: Front speaker L-
  • Gray: Front speaker R+
  • Gray/black striped: Front speaker R-
  • Green: Rear speaker L+
  • Green/black striped: Rear speaker L-
  • Purple: Rear speaker R+
  • Purple/black striped: Rear speaker R-
  • Black: GND (Ground Wire / B-)
  • Yellow: BATTERY (Constant Power Supply +12V)
  • Red: ACC (Ignition Switch)
  • Orange: ILLUMINATION (Illuminate Backlight)
  • Pink: REVERSE (Reversing camera control line)
  • Brown/white: KEY2 (Steering Wheel Control 2)
  • Brown: KEY1 (Steering Wheel Control 1)
  • Blue: ANT (Auto Antenna Power)

General Installation Steps

  1. Connect the harness adapter and CAN Bus decoder correctly as shown in the provided images.
  2. Carefully remove your original car radio and other necessary components to access the wiring.
  3. Connect the ISO connector of the harness to your car's original wiring.
  4. Connect the 16-pin plug of the harness to your new Android radio.
  5. Connect the 8-pin CAN Bus connector from the decoder to your Android radio's CAN Bus input.
  6. Connect the DIN antenna adapter to ensure proper radio reception.
  7. Secure all connections and ensure no wires are pinched or exposed.
  8. Reassemble your car's dashboard components.

Important Installation Considerations

  • Original Small Display: The car's original small display should be maintained. Its small screen must be a 24-pin type for proper functionality.
  • Original CD Unit: In some installations, the original car CD unit may need to be retained in its original position or moved to another location, with its cable disconnected from the new head unit but still connected to the original car system.
  • Air Conditioning: Ensure the air conditioning system remains functional and is not affected by the installation.
  • Airbag Light Module: If applicable, the original airbag light module may need to be removed and hidden within the car, or replaced with a modified airbag light board, depending on the specific installation scenario.

CAN Bus Setting Operation

After physical installation, configure the CAN Bus settings on your Android system:

  1. Enter the Android system's factory settings part (a password may be required).
  2. Navigate to the CAN Bus Part section.
  3. Choose the appropriate CAN Bus decoder brand (e.g., Hiworld).
  4. Select your car's brand.
  5. Select your specific car model and year.
Screenshot illustrating the CAN Bus setting operation menu
Figure 6: Example of the CAN Bus setting menu within an Android head unit, showing options for selecting decoder brand, car brand, and model/year.

Refer to the table below for common decoder labels and their corresponding settings:

No.Decoder LabelSetting Step 1Setting Step 2Setting Step 3
1Raise/睿志Raise/RZCCar BrandCar Model & Year
2HiworldHiworld/WCCar BrandCar Model & Year
3ODOD/OudiCar BrandCar Model & Year
4SimpleSoftSimpleSoft/XP/XNPUCar BrandCar Model & Year
5LuZhengLuZheng/ZCar BrandCar Model & Year

Connect your Android system to the internet to update the CAN Bus APK version if necessary.

Operating Instructions

Once correctly installed and configured, the wiring harness and CAN Bus decoder enable the following features with your Android car radio:

  • Supports ACC 12V signal: Provides the Accessory 12V power signal to your Android radio, allowing it to turn on and off with the vehicle's ignition.
  • Supports reversing signal: Transmits the reversing signal to the Android radio, enabling automatic display of the rearview camera feed when the vehicle is in reverse.
  • Supports original car steering wheel control: Allows you to use your car's original steering wheel buttons to control functions on your Android radio (e.g., volume, track change).
  • Supports car door status: Integrates with the vehicle's CAN Bus system to display the status of car doors on your Android radio screen.

Maintenance

To ensure the longevity and optimal performance of your wiring harness and CAN Bus decoder, follow these general maintenance guidelines:

  • Regular Inspection: Periodically check all connections to ensure they are secure and free from corrosion or damage.
  • Avoid Stress: Do not pull or tug on the wires excessively, as this can damage the connectors or internal wiring.
  • Cleanliness: Keep the area around the wiring and decoder clean and free from dust or debris.
  • Professional Assistance: If you notice any signs of wear, damage, or malfunction, it is recommended to seek assistance from a qualified automotive technician.

Troubleshooting

If you encounter issues with your PHYEE ISO Wiring Harness and CAN Bus Decoder, please refer to the following troubleshooting steps:

  • No Power to Radio: Check all power connections (BATTERY, ACC, GND) for proper seating and continuity. Ensure the vehicle's fuse for the radio is intact.
  • Features Not Working (SWC, Reverse, Door Status): Verify that the CAN Bus decoder is correctly connected to both the car's wiring and the Android radio's CAN Bus input. Double-check the CAN Bus settings in your Android system's factory settings, ensuring the correct decoder brand, car brand, model, and year are selected.
  • No Sound: Confirm all speaker wires are correctly connected to the Android radio and the car's speakers.
  • Radio Reception Issues: Ensure the DIN antenna adapter is securely connected to both the car's antenna and the Android radio.
  • Compatibility Issues: If the product does not seem to function at all, re-verify that your car model, phase, and original radio connector type (ISO) are fully compatible with this harness. Also, confirm your new head unit is an Android system with both a 16-pin and an 8-pin CAN Bus socket.

User Tips

  • Verify Compatibility: Always double-check your car's exact model, phase, and year against the product's compatibility list before purchasing. Ensure your original radio uses an ISO connector and your new Android radio has the required 16-pin and 8-pin CAN Bus sockets.
  • Professional Installation: If you are unsure about any step of the installation process, it is highly recommended to seek professional assistance to avoid damage to your vehicle or the product.
  • CAN Bus Settings: Pay close attention to the CAN Bus settings in your Android system. Incorrect settings are a common cause of features like steering wheel controls not working.
  • Firm Connections: Ensure all connectors are firmly seated and locked into place to prevent intermittent issues.

Warranty and Support

For any issues, questions, or support needs, please contact the PHYEE Official Store directly through the platform where you made your purchase. For additional item guides and documents, you may refer to the User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.