Introduction
The Bileeko 3-in-1 Radar Car Video Parking Sensor Kit is designed to enhance driving safety and convenience, particularly during reversing maneuvers. This innovative system integrates a rear-view camera with two parking radar sensors, providing a visible LED parktronic display, a backup monitor, and an audible alarm. It accurately measures obstacle distances and displays real-time video feedback on your car's monitor, allowing for safer and more confident parking.
This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko 3-in-1 Radar Car Video Parking Sensor Kit.
Key Features
- Triple Assurance: Combines image display, sound alarm, and digital distance data for comprehensive parking assistance.
- Integrated Design: New 3-in-1 radar with rear view camera, accurately measuring obstacle distance.
- Easy Installation: No drilling required for the camera and sensor unit, simplifying the setup process.
- Wide-Angle View: 170-degree visible angle for safer reversing.
- Night Vision Support: Built-in LED lights automatically activate in low light conditions for clear images in darkness.
- Parking Radar Sensor: Activates automatically when reversing, providing audible alerts (Bi Bi Bi~) as obstacles are detected.
- Waterproof Design: IP68 waterproof rating for reliable performance in various weather conditions.
- Compatibility: Compatible with all car DVD systems and TFT monitors.
- Detection Range: Obstacle detection from 0.3 meters to 2.0 meters.
Package Contents
Please check the package contents upon receipt to ensure all components are present:
- TFT LCD Car Rear View Monitor (4.3 Inch / 5 Inch / 7 Inch, depending on selected option)
- 3-in-1 Car Reversing Backup Rear View Camera with 2 Parking Radar Sensors
- Buzzer/Alarm Unit
- Power Cables and Video Cables
Installation Guide
Follow these steps for proper installation of your parking sensor kit. It is recommended to have this installed by a professional if you are not familiar with car electrical systems.
1. Camera and Sensor Unit Installation
The 3-in-1 camera and sensor unit is designed for easy installation without the need for drilling.

Figure 1: Easy Installation - No Drilling Required
Mount the 3-in-1 unit (containing the camera and two sensors) at the rear of your vehicle, typically above the license plate or on the bumper, ensuring a clear view and unobstructed sensor operation. The unit's compact design allows for discreet placement.

Figure 2: Comparison of Bileeko 3-in-1 Reversing Radar vs. Traditional Systems
2. Wiring Diagram
Connect the components according to the following wiring diagram:

Figure 3: System Wiring Diagram
- Camera Power: Connect the camera's power cable to your vehicle's reverse light power (12V). This ensures the camera and sensors activate automatically when the vehicle is put into reverse.
- Buzzer Connection: Connect the buzzer unit to the designated output from the camera/sensor unit.
- Video Signal: Connect the video output cable from the camera to the AV2 input of your monitor.
- Monitor Power: Connect the monitor's power cable to a 12V DC power source in your vehicle. The monitor supports AV1 (for VCD/DVD, defaulted) and AV2 (for backup camera), with automatic signal detection.
3. Monitor Placement
Mount the monitor in a convenient location on your dashboard or windshield, ensuring it does not obstruct your view while driving. The monitor comes in various sizes (4.3, 5, or 7 inches) and mounting options (stand or mirror clip, depending on your chosen model).
Operating Instructions
The Bileeko 3-in-1 Radar Car Video Parking Sensor Kit operates automatically when your vehicle is in reverse gear.
1. Automatic Activation
When you shift your vehicle into reverse, the system will automatically power on the monitor, activate the rear-view camera, and enable the parking radar sensors.
2. Visual Display
The monitor will display the live video feed from the rear-view camera. Parking guidelines (red, yellow, green lines) will be overlaid on the video to assist with distance judgment. The display may also show the digital distance to obstacles.

Figure 4: Image, Sound, and Digital Display for Parking Assurance
3. Audible Alarm
The parking radar sensors detect obstacles behind your vehicle. As you approach an obstacle, the buzzer will emit an audible alarm. The frequency of the 'Bi Bi Bi' sound increases as the distance to the obstacle decreases.

Figure 5: Radar Sensor Distance and Alarm Frequency Chart
Alarm Frequency Guide:
- 1.6m - 2.0m: Slow 'Bi' sound (0.5 HZ)
- 1.1m - 1.5m: Moderate 'Bi' sound (1 HZ)
- 0.6m - 1.0m: Frequent 'Bi' sound (3 HZ)
- 0m - 0.4m: Continuous 'BI-----' sound
4. Night Vision
The iPoster HD camera features built-in LED lights that automatically activate in low-light conditions, ensuring a clear and bright image even in darkness.

Figure 6: Night Vision and Parking Radar Sensor Functionality
Maintenance
To ensure the longevity and optimal performance of your Bileeko parking sensor kit, please observe the following maintenance guidelines:
- Keep Sensors Clean: Regularly clean the surface of the radar sensors to prevent dirt, mud, or ice from obstructing their function. Use a soft, damp cloth.
- Inspect Wiring: Periodically check all wiring connections for any signs of wear, damage, or loose connections. Ensure sensor wires are not damaged or pinched.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents on the camera lens or monitor screen.
- Waterproof Integrity: While the camera is IP68 waterproof, avoid directing high-pressure water jets directly at the unit during car washes.
Troubleshooting
If you encounter any issues with your parking sensor kit, please refer to the following common problems and solutions:
- No Image on Monitor:
- Check all power connections to the monitor and camera.
- Ensure the video cable is securely connected to the AV2 input on the monitor.
- Verify that the vehicle is in reverse gear, as the system activates automatically.
- No Audible Alarm:
- Check the connection of the buzzer unit to the camera/sensor unit.
- Ensure the sensor surfaces are clean and unobstructed.
- Inaccurate Distance Readings or False Alarms:
- Clean the sensor surfaces thoroughly.
- Ensure sensors are not covered by mud, snow, or bumper stickers.
- Verify that the sensors are correctly aimed and not pointing towards the ground or sky.
- Blurry or Distorted Image:
- Clean the camera lens.
- Check video cable connections for any damage or interference.
If problems persist, please contact customer support for further assistance.
Specifications
Monitor Specifications:
- Screen Size: 4.3 Inch / 5 Inch / 7 Inch (selectable)
- Display Resolution: 480 x RGB x 272 pixels (for 4.3/5 Inch) / 800 x RGB x 480 Pixels (for 7 Inch)
- Aspect Ratio: 16:9 / 4:3
- Power Supply: DC 12V
- Video Input: AV1 (VCD/DVD, defaulted), AV2 (Backup Camera) - AV signal auto detect power on/off
- Signal System: PAL/AUTO/NTSC
Camera & Sensor Unit Specifications:

Figure 7: Components of the 3-in-1 Camera Unit
- Video Type: PAL
- Resolution: 720*480 pixels
- Video Color: Colorful
- Working Voltage Supply: DC 10V-15V (12V in car)
- Current Consumption: ≤150mA
- Detection Range: 0.3m ~ 2m
- Alarm Distance: 0m ~ 2.0m
- Detection Angle: 30 degree
- Alarm Volume: 70dB ~ 90dB
- Visible Angle: 170 degree
- Minimum Illumination: 0.1Lux
- Waterproof Class: IP68
- Work Temperature: -40℃ ~ 85℃
Physical Dimensions (Camera & Sensor Unit):

Figure 8: Dimensions of the 3-in-1 Camera and Sensor Unit (Height: 24mm, Width: 62mm, Depth: 31mm)
- Height: 24mm
- Width: 62mm
- Depth: 31mm
Certifications:
- Always ensure the vehicle's speed is low when reversing to allow the system to react effectively and for you to respond to alerts.
- The parking sensor kit is an aid to safe parking and should not replace careful observation and judgment by the driver. Always check your surroundings visually.
- Do not attempt to modify or disassemble the product. This may void any potential warranty and could lead to malfunction or damage.
- Keep the product away from extreme temperatures, direct sunlight for prolonged periods, and corrosive substances.
User Tips
- For optimal performance, ensure the camera lens and sensor surfaces are always clean and free from obstructions.
- Familiarize yourself with the different alarm frequencies to quickly understand the proximity of obstacles without needing to constantly look at the screen.
- Test the system in a safe, open area after installation to understand its range and how it responds to various objects.
Warranty and Support
For any questions, technical support, or warranty inquiries regarding your Bileeko 3-in-1 Radar Car Video Parking Sensor Kit, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.