1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of the Raise RZ-VW08 and RZ-VW58 Canbus Boxes. These devices are designed to integrate your vehicle's original functions, such as steering wheel controls, door status, and air conditioning information, with an aftermarket Android head unit. Please read this manual carefully before installation and use.
2. Compatibility Check
Before proceeding with installation, it is crucial to confirm the correct Canbus box for your vehicle. Different car models and radio configurations require specific versions. To ensure compatibility, please perform the following:
- Locate your original car radio.
- Take a clear picture of the backside of your original radio, specifically highlighting the power connector.
- Send this picture to the seller for verification. The seller will confirm which Canbus box (RZ-VW08 or RZ-VW58) is suitable for your car.
Compatible Vehicle Models:
- Raise VW-RZ-08 Canbus Box: For Volkswagen Golf 5/6, Polo, Passat, Jetta, Tiguan, Touran, Skoda.
- Raise VW-RZ-58 Canbus Box: For Android Volkswagen, Skoda, Seat.
Canbus Cable Set Compatibility (General):
- For 2007-2014 SKODA OCTAVIA
- For 2014+ SKODA Yeti
- For 2013 SKODA RAPID
- For 2000-2013 SKODA Superb
- For SKODA 2014 RAPID SPACEBACK
- For Before 2013 VW Golf 6
- For 2012-2015 VW Sagitar
- For VW 2011 Sagitar
- For 2010+ VW MAGOTAN/CC
- For 2003-2010 VW Touareg
- For 2011-2013 VW Touran
- For 2014 VW Touran
- For 2015+ VW Touran
- For 2011 VW Lavida
- For 2015 VW SCIROCCO MANUAL AC
- For 2011-2016 VW POLO
- For 2010-2015 VW Tiguan
- For 2012-2015 VW Passat
- For 2017+ VW Passat
- For 2012-2018 VW Sharan
- For 2009-2014 VW Scirocco
- For VW Passat B7
- For 2012-2018 VW Popular Beetle
- For 2020 VW Jetta
3. Setup and Installation
3.1 Wiring Connection
The Canbus box and its accompanying wiring harness are designed for plug-and-play installation with compatible Android head units and vehicle wiring. Ensure the vehicle's power is off before making any connections.
- Carefully remove your existing car radio/head unit.
- Connect the vehicle's original wiring harness to the corresponding connector on the Canbus wiring harness.
- Connect the Canbus box to the Canbus wiring harness.
- Connect the other end of the Canbus wiring harness to your new Android head unit. Ensure all connections are firm and secure.
3.2 Canbus Version Update (Software)
After physical installation, ensure your Android head unit's Canbus software is up to date. This process is typically done through the head unit's settings.
- On your Android head unit, navigate to the Settings menu.
- Look for an option related to Updates or System Updates.
- Select Check for Updates for the Canbus version.
- If an update is available, follow the on-screen prompts to install it.
3.3 Protocol Setting
To ensure proper communication between the Canbus box and your vehicle, you need to select the correct vehicle protocol on your Android head unit.
- From the main menu of your Android head unit, go to Car Info.
- Select Protocol Setting.
- You may be prompted to enter an administration password. If you do not have this password, please contact your seller.
- Once inside the protocol settings, select your specific car model from the provided list.
- The system may restart after selecting the protocol.
4. Operating Instructions
4.1 Steering Wheel Control Learning
After setting the correct protocol, you will need to configure your steering wheel controls to work with the new head unit.
- On your Android head unit, locate the Steering Wheel Learning application or setting.
- Select the function you wish to program (e.g., "Volume+", "Next Track", "Mode").
- While the function is selected on the screen, press and hold the corresponding button on your vehicle's steering wheel. The head unit should register the input.
- Repeat this process for all desired steering wheel buttons.
- Once all buttons are programmed, select Save to apply the settings.
4.2 General Operation
The Canbus box facilitates the seamless integration of your vehicle's original features with your Android head unit. Depending on your vehicle model and head unit capabilities, this may include:
- Displaying door open/closed status.
- Showing air conditioning information on the head unit screen.
- Maintaining original vehicle settings and data.
5. Maintenance
The Raise Canbus Box is designed for reliable operation with minimal maintenance. To ensure optimal performance and longevity:
- Secure Connections: Periodically check that all wiring connections to the Canbus box and head unit are secure and free from corrosion.
- Software Updates: Regularly check for and install any available software updates for your Android head unit and Canbus system, as these can improve compatibility and add new features.
- Cleanliness: Keep the area around the Canbus box free from dust and debris.
6. Troubleshooting
If you encounter issues with your Raise Canbus Box, please refer to the following troubleshooting steps:
6.1 Canbus Box Not Detected / Functions Not Working
- Check Physical Connections: Ensure the Canbus box and all associated wiring harnesses are correctly and securely connected to both the vehicle's wiring and the Android head unit.
- Verify Canbus Version: On your Android head unit, go to "Car Info" > "Version Info" to confirm if the Canbus box version is detected. If it shows "File not exist" or similar, proceed to the next step.
- Confirm Protocol Setting: Navigate to "Car Info" > "Protocol Setting". Enter the administration password (if required) and ensure that your specific car model is correctly selected from the list. Incorrect protocol selection is a common cause of non-detection.
- Restart Head Unit: After making any changes to the protocol settings, restart your Android head unit completely.
6.2 Steering Wheel Controls Not Responding
- Check Protocol Setting: As mentioned above, ensure the correct car model protocol is selected in the head unit's settings.
- Re-perform Steering Wheel Learning: Go to the "Steering Wheel Learning" application on your head unit and repeat the programming process for each button. Ensure you press and hold the physical button on the steering wheel firmly until the head unit registers the input.
6.3 Other Issues
If the above steps do not resolve your issue, please contact the seller for further technical assistance. Provide them with details of your vehicle model, Android head unit model, and a clear description of the problem.
7. Specifications
| Attribute | Value |
|---|---|
| Voltage | 12 V |
| Item Type | Cables, Adapters & Sockets |
| Origin | Mainland China |
| High-concerned chemical | None |
8. User Tips
- Double-Check Compatibility: Always verify the correct Canbus box model with the seller based on your car's original radio connector before installation to avoid issues.
- Document Original Setup: Take photos of your original wiring connections before disconnecting anything. This can be invaluable for troubleshooting or if you ever need to revert to the factory setup.
- Restart After Protocol Change: If the Canbus box is not immediately recognized or functions are not working after setting the protocol, perform a full restart of your Android head unit.
- Password for Protocol Settings: The administration password for protocol settings is usually provided by the seller. Keep it safe or contact them if you need it.
9. Warranty and Support
For any warranty-related inquiries, technical support, or assistance with installation and troubleshooting beyond the scope of this manual, please contact the seller directly through your purchase platform. Provide your order details and a clear description of the issue for prompt assistance.
