1. Important Safety Instructions
Please read and understand all instructions before using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to off, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an automatic overheating protection system. If the heater overheats, it will automatically shut off. Unplug the heater, wait for it to cool down, and then plug it back in.
- Ensure the power supply voltage matches the rating label on the heater.
2. Product Overview
The Homcom Electric Wall Heater is a modern and efficient heating solution designed for various spaces in your home or office. Featuring PTC ceramic heating technology, it provides rapid and consistent warmth. Its wall-mounted design saves floor space, making it ideal for smaller rooms.
Key Features:
- PTC Ceramic Heating: Provides fast and efficient heating.
- Wall-Mounted Design: Space-saving and aesthetically pleasing.
- Adjustable Temperature: Set your desired temperature between 18°C and 45°C.
- Two Heating Modes: Choose between 1000W and 2000W power settings.
- 12-Hour Timer: Program the heater to operate for a specific duration.
- Oscillation Function: Ensures even distribution of warm air across a 15-20 m² coverage area.
- LED Display: Clear digital display for easy monitoring of settings.
- Remote Control: Convenient operation from a distance.
- Overheating Protection: Automatic shut-off for enhanced safety.
Package Contents:
- 1 x Homcom Electric Wall Heater Unit
- 1 x Remote Control (with 1 CR2025 battery included)
- 1 x Mounting Hardware Kit (screws, wall anchors)
- 1 x User Manual
3. Setup and Installation
This heater is designed for wall-mounting. Ensure you have the necessary tools (drill, screwdriver, level, measuring tape) before beginning installation.
Wall Mounting:
- Choose a Location: Select a suitable wall location, ensuring it is away from combustible materials (at least 1 meter) and not directly above or below a power outlet. The wall must be sturdy enough to support the heater's weight.
- Mark Drilling Points: Use the provided mounting template (if available) or measure the distance between the mounting holes on the back of the heater. Mark these points on the wall using a pencil and a level to ensure horizontal alignment.
- Drill Holes: Drill holes at the marked points. The size of the drill bit should match the wall anchors provided.
- Insert Wall Anchors: Gently tap the wall anchors into the drilled holes until they are flush with the wall surface.
- Secure Mounting Bracket: Attach the mounting bracket (if separate) or the heater directly to the wall using the screws provided, tightening them into the wall anchors.
- Mount the Heater: Carefully lift the heater and align its mounting slots with the screws or bracket on the wall. Secure the heater in place.
Remote Control Battery Installation:
The remote control requires one CR2025 battery (included).
- Locate the battery compartment on the back of the remote control.
- Pull out the battery tray.
- Insert the CR2025 battery with the positive (+) side facing up.
- Slide the battery tray back into the remote control until it clicks into place.
4. Operating Instructions
The heater can be operated using the control panel on the unit or the included remote control.
Control Panel and Remote Control Functions:
- ON/OFF Heat: Powers the unit on or off and cycles through heating modes (1000W/2000W).
- Temp (Temperature): Adjusts the desired temperature (18°C - 45°C). Use the 'Set' button on the remote or the 'Temp' button on the unit to enter temperature adjustment mode, then use arrow keys (on remote) or repeated presses (on unit) to select.
- Timer: Sets the operating timer from 1 to 12 hours. Press the 'Timer' button, then use arrow keys (on remote) or repeated presses (on unit) to select the desired duration.
- Swing: Activates or deactivates the oscillation function for wider heat distribution.
- OK/Set: Confirms selections on the remote control.
- Cancel: Cancels current settings or exits a menu on the remote control.
General Operation:
- Power On: Plug the heater into a suitable 220-240V/5Hz power outlet. Press the 'ON/OFF Heat' button on the control panel or remote control. The LED display will illuminate.
- Select Heating Mode: Press the 'ON/OFF Heat' button again to cycle between 1000W and 2000W heating modes. The display will indicate the current mode.
- Set Temperature: Press the 'Temp' button. The temperature display will flash. Use the arrow buttons on the remote or repeated presses of the 'Temp' button on the unit to adjust the desired temperature between 18°C and 45°C. The heater will maintain this temperature.
- Set Timer: Press the 'Timer' button. The timer display will flash. Use the arrow buttons on the remote or repeated presses of the 'Time' button on the unit to set the desired operating duration from 1 to 12 hours. The heater will automatically turn off after the set time.
- Activate Oscillation: Press the 'Swing' button to start or stop the oscillation function.
- Power Off: Press the 'ON/OFF Heat' button to turn off the heater. Unplug the unit from the wall outlet when not in use for extended periods.
5. Maintenance
Regular cleaning and proper storage will help maintain the performance and longevity of your heater.
Cleaning:
- Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
- Wipe the exterior surfaces of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to remove dust from the air intake and outlet grilles.
- Ensure no water or liquids enter the interior of the heater.
Storage:
- When not in use, store the heater in a cool, dry place.
- It is recommended to store the heater in its original packaging to protect it from dust and damage.
6. Troubleshooting
If you encounter issues with your heater, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Remote control battery is dead. Overheating protection activated. | Check if the heater is properly plugged into a working outlet. Replace the CR2025 battery in the remote control. Unplug the heater, wait 10-15 minutes for it to cool down, then plug it back in. |
| Heater is on but no heat is produced. | Temperature setting is too low. Heating mode is not selected. | Increase the desired temperature setting above the current room temperature. Ensure a heating mode (1000W or 2000W) is selected using the 'ON/OFF Heat' button. |
| Heater suddenly turns off. | Overheating protection activated. Timer has expired. | Unplug the heater, wait for it to cool down, and ensure air vents are not blocked. Plug back in. Check the timer setting. If the timer has reached zero, the unit will turn off. Reset if needed. |
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Attribute | Specification |
|---|---|
| Model Reference | 820-294V90GY |
| Color | Gray |
| Material | ABS |
| Overall Dimensions (LxWxH) | 54.5 cm x 12 cm x 21.5 cm |
| Air Outlet Dimensions (LxW) | 34 cm x 4.5 cm |
| Coverage Area | 15-20 m² |
| Input Voltage | 220-240V / 5Hz |
| Power Settings | 1000W / 2000W |
| Temperature Range | 18°C - 45°C |
| Timer | 1-12 hours |
| Cable Length | 1.5 m |
| Remote Control Battery | 1 x CR2025 (included) |
8. User Tips
- Optimal Placement: For best results, mount the heater on an interior wall in the room you wish to heat. Avoid placing it near drafts or open windows, which can reduce efficiency.
- Energy Saving: Utilize the timer function to heat your space only when needed. Set the temperature to a comfortable level (e.g., 20-22°C) rather than the maximum to conserve energy.
- Remote Control Care: Keep the remote control in a safe place to avoid misplacing it. If the remote's range decreases, consider replacing the battery.
- Air Circulation: Ensure the oscillation function is active for even heat distribution, especially in larger rooms within the recommended coverage area.
9. Warranty and Support
For warranty information, technical support, or any questions regarding your Homcom Electric Wall Heater, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
