HOMCOM 820-252V90BK

Contents

Homcom Electric Wall Heater User Manual

Model: 820-252V90BK | Brand: HOMCOM

1. Introduction

Thank you for choosing the Homcom Electric Wall Heater. This manual provides important information regarding the safe installation, operation, and maintenance of your new heater. Please read this manual thoroughly before use and retain it for future reference.

This wall-mounted PTC ceramic heater is designed to efficiently warm small spaces such as bedrooms and bathrooms. It features an LED display, remote control, adjustable heat settings, a timer, and oscillation for optimal comfort.

Homcom Electric Wall Heater with remote control and heat output
Figure 1: Homcom Electric Wall Heater with remote control and visible heat emission.

2. Safety Instructions

  • Read all instructions before using this heater.
  • Do not use this heater in areas where gasoline, paint, or flammable liquids are used or stored.
  • This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater.
  • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended.
  • Always unplug the heater when not in use.
  • Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner.
  • Do not run power cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
  • Connect to properly grounded outlets only.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • This heater has an IPX2 water resistance rating, making it suitable for bathroom use, but it should not be directly exposed to water splashes or submerged.
  • This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
  • Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
  • Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

  • Homcom Electric Wall Heater Unit
  • Remote Control (1 x CR2035 3V battery included)
  • Mounting Hardware (screws, wall anchors)
  • User Manual

4. Installation and Setup

This heater is designed for wall-mounted installation. Assembly is required.

  1. Choose a Location: Select a suitable wall location, ensuring it is away from combustible materials (at least 1 meter) and not directly above or near water sources. Ensure there is sufficient clearance around the heater for proper airflow.
  2. Mark Drilling Points: Hold the heater against the wall at the desired mounting height. Use a pencil to mark the positions for the mounting screws.
  3. Drill Holes: Drill holes at the marked points. Insert wall anchors if necessary, depending on your wall material.
  4. Mount the Heater: Secure the heater to the wall using the provided screws. Ensure it is firmly attached and level.
  5. Power Connection: Plug the heater into a properly grounded electrical outlet.
Homcom Electric Wall Heater mounted on a wall
Figure 2: Heater mounted on a wall, illustrating typical installation.

5. Operating Instructions

The heater can be operated using the control panel on the unit or the included remote control.

5.1 Control Panel and Remote Control

The heater features an LED display for easy monitoring of settings and a remote control for convenient operation from a distance.

LED display and remote control functions for the heater
Figure 3: LED display and remote control with functions for Timer, Oscillation, Heating Mode, and On/Off.

5.2 Power On/Off

  • Press the Power button (Encendido/Apagado icon on remote) on the unit or remote control to turn the heater on or off.

5.3 Heat Mode Selection

The heater offers adjustable heat modes:

  • Low Heat (1000W): For gentle, continuous warmth.
  • High Heat (2000W): For rapid heating of the room.
  • Auto Mode: The heater will adjust its power output to maintain the set temperature.

Use the 'Mode' button (Modo de Calefacción icon on remote) to cycle through these options.

5.4 Temperature Adjustment

  • The temperature can be adjusted between 10°C and 49°C.
  • Use the '+' and '-' buttons on the control panel or remote control to set your desired temperature.
Heater rapidly heating a room with temperature range 10-49°C
Figure 4: Fast heating capability with adjustable temperature range.

5.5 Oscillation Function

  • The heater features a 30-degree oscillation function to distribute warm air more evenly across the room.
  • Press the 'Oscillation' button (Oscilación icon on remote) to activate or deactivate this feature.

5.6 Timer Function

  • Set the heater to operate for a specific duration from 1 to 12 hours.
  • Press the 'Timer' button (Temporizador icon on remote) and use the '+' and '-' buttons to select the desired operating time. The heater will automatically turn off once the set time expires.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

6.1 Cleaning

  • Always unplug the heater and allow it to cool completely before cleaning.
  • Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
  • Gently vacuum the air intake and exhaust grilles to remove dust and lint.
  • Do not immerse the heater in water or allow water to drip into the interior.

6.2 Storage

  • When not in use, store the heater in a cool, dry place.
  • It is recommended to store the heater in its original packaging to protect it from dust and damage.

7. Troubleshooting

If you encounter issues with your heater, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Heater does not turn on.No power supply; Power switch off; Overheating protection activated.Check power cord connection; Ensure power switch is on; Unplug and let cool for 30 minutes, then restart.
Heater stops unexpectedly.Overheating protection activated; Timer function ended.Unplug and let cool for 30 minutes, then restart; Check timer settings.
No heat output.Heating mode not selected; Temperature set too low.Select a heat mode (Low/High); Increase the target temperature.
Remote control not working.Battery depleted; Obstruction between remote and heater.Replace CR2035 3V battery; Ensure clear line of sight to heater's sensor.

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

FeatureDetail
Model Reference820-252V90BK
ColorBlack
MaterialPP and PA
Total Measurements (LxWxH)56 cm x 18.5 cm x 11.7 cm
Air Outlet Measurements (LxW)33 cm x 5 cm
Temperature Range10°C - 49°C
Power1000W / 2000W
Coverage Area20-25 m²
Cable Length1.5 m
Remote Control Range5 m
Rated Voltage220-240V / 50Hz
Waterproof GradeIPX2
Remote Control Battery1 x CR2035 3V (included)
Dimensions diagram of the Homcom Electric Wall Heater
Figure 5: Heater dimensions (Length: 56 cm, Width: 18.5 cm, Height: 11.7 cm).

9. User Tips

  • Optimal Placement: For best heating results, install the heater on an interior wall, away from drafts, to maximize heat retention in the room.
  • Remote Control Care: Keep the remote control in a safe place to avoid misplacing it. If the remote stops responding, try replacing the CR2035 battery.
  • Energy Saving: Utilize the timer function to heat your space only when needed, and use the lower heat setting (1000W) for maintaining warmth once the desired temperature is reached.
  • Bathroom Use: While IPX2 rated, avoid direct water spray on the unit. Ensure it is installed in a location where it won't be splashed by shower or bath water.

10. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.