1. Introduction
Thank you for purchasing the AICPOSE 36 LED Strobe Beam 200W Stage Light. This professional lighting fixture is designed for stage, DJ, disco, bar, and party environments, offering high-intensity beams, vibrant colors, and dynamic effects. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Safety Information
- Always connect the device to a grounded power outlet.
- Ensure the voltage and frequency of the power supply match the specifications of the device.
- Do not expose the device to rain or moisture.
- Avoid direct eye exposure to the light source, as it can cause eye damage.
- Ensure proper ventilation around the unit to prevent overheating. Do not block cooling holes.
- Disconnect from power before cleaning or servicing.
- This product is intended for indoor use only (IP20 rating).
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- 1 x AICPOSE 36 LED Strobe Beam 200W Stage Light Unit
- 1 x Product Manual
- 1 x Power Cord
4. Product Overview
4.1 Key Features
- 36x3W Warm White LED main lights (36 segments)
- 648x 5050RGB auxiliary lights (36 segments)
- RGBW 4-in-1 Lamp Beads for vibrant colors
- Moving head functionality (X-axis: 180°)
- Multiple control modes: DMX512, self-propelled, master-slave, voice control, RDM function
- Dynamic effects: Strobe, Jump, Gradual Change, Pulse Change, Chasing Effect, Burst Flash, Coloring
- 32-bit 0-100% linear dimming
- Efficient heat dissipation system with cooling holes
- LCD display with menu navigation buttons
4.2 Components
- LCD Display: High-definition digital display for settings and status.
- Control Buttons: MENU, UP, DOWN, ENTER for navigation and selection.
- DMX IN/OUT: 3-pin XLR connectors for DMX512 control.
- Power IN/OUT: PowerCon compatible connectors for power input and daisy-chaining.
- Cooling Fan: Ensures efficient heat dissipation.
- Omega Bracket: For easy hanging and mounting.
5. Setup
5.1 Mounting
- Attach the Omega bracket securely to the fixture using the provided hardware.
- Mount the fixture to a truss or suitable support structure using appropriate clamps (not included). Ensure the mounting point can safely support the weight of the fixture (5.7 KG).
- Adjust the angle of the light using the shake head mechanism as needed.
5.2 Electrical Connection
- Connect the power cord to the Power IN connector on the fixture.
- Plug the other end of the power cord into a grounded AC100~240V, 50/60HZ power outlet.
- If daisy-chaining multiple units, connect a power cable from the Power OUT of the first fixture to the Power IN of the next. Ensure not to exceed the maximum power load for the circuit.
5.3 DMX Connection (Optional)
- Connect a DMX cable from your DMX controller's output to the DMX IN connector on the first fixture.
- To control multiple fixtures, connect a DMX cable from the DMX OUT of the first fixture to the DMX IN of the next, creating a daisy chain.
- Terminate the DMX chain with a 120-ohm DMX terminator on the DMX OUT of the last fixture for reliable signal transmission.
6. Operating Instructions
6.1 Control Panel Navigation
Use the MENU, UP, DOWN, and ENTER buttons on the LCD display to navigate through the settings and select operating modes.
- MENU: Accesses the main menu or goes back to the previous menu.
- UP/DOWN: Navigates through menu options or adjusts parameter values.
- ENTER: Confirms selection or saves changes.
6.2 Operating Modes
The fixture supports several operating modes:
- DMX512 Mode: Allows control of the fixture via a DMX controller. Set the DMX address and select the desired channel mode (CH6, CH16, or CH146) through the menu.
- Self-Propelled Mode (Auto Mode): The fixture runs through pre-programmed internal shows. Select 'AUTO' via the menu.
- Master-Slave Mode: Connect multiple fixtures via DMX cables. Set one fixture as 'Master' and others as 'Slave'. The slave units will mimic the master's operation.
- Voice Control Mode (Sound Active): The fixture reacts to sound and music. Select 'SOUND' via the menu.
- RDM Function: Remote Device Management allows for remote DMX addressing and other settings via a compatible DMX controller.
6.3 Light Effects and Adjustments
- Dimming: Adjust the brightness from 0% to 100% using the 32-bit linear dimming feature.
- Strobe: The strobe frequency can be adjusted from 1 to 30 flashes per second.
- Coloring: Utilize the RGBW and Warm White LEDs to create a wide spectrum of colors.
- Moving Head: The fixture can move along the X-axis up to 180 degrees, allowing for dynamic beam positioning.
7. Maintenance
- Cleaning: Regularly clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure the cooling holes are free from dust and debris to maintain optimal heat dissipation. Use compressed air to clear dust if necessary.
- Inspection: Periodically check all cables and connections for signs of wear or damage. Replace any damaged components immediately.
- Storage: When not in use, store the fixture in a dry, dust-free environment.
8. Troubleshooting
- No Power: Check the power cable connection, the power outlet, and ensure the correct voltage is supplied.
- No Light Output: Verify power, check selected operating mode, and ensure dimming is not set to 0%.
- No DMX Control: Check DMX cable connections, DMX address settings, and ensure a DMX terminator is used on the last fixture in the chain. Verify the DMX controller is functioning correctly.
- Fixture Overheating: Ensure cooling holes are clear and the environment temperature is within the operating range (-30°C to 50°C).
9. Specifications
| Feature | Specification |
|---|---|
| Voltage | AC100~240V 50/60HZ |
| Power | 200W |
| Main Lamp Beads | 36 x 3W Warm Light (36 segments) |
| Auxiliary Lamp Beads | 648 x 5050RGB (36 segments) |
| Color Temperature | Warm 3200K |
| Control Modes | DMX512, Self-propelled, Master-slave, Voice control, RDM function |
| DMX Channels | CH6, CH16, CH146 |
| Dimming | 32bit 0~100% linear dimming |
| Features | Burst flash, Coloring, Effect, Shaking head (X-axis 180°) |
| Operating Temperature | -30°C ~ 50°C |
| Strobe Frequency | 1~30HZ |
| Appearance | Metal, Black |
| Connection | DMX512 input and output / Power input and output |
| IP Rating | IP20 |
| Product Size | 480 x 250 x 85mm |
| Net Weight | 5.7 KG |
| Inner Box Size | 56 x 15 x 32cm |
| Gross Weight | 6.3 KG |
10. User Tips
No specific user tips were available from provided reviews or Q&A. General advice for stage lighting includes:
- Experiment with different DMX channel modes to find the best balance of control and simplicity for your setup.
- Utilize the master-slave mode for synchronized effects across multiple units without complex DMX programming.
- Consider using a DMX recorder for complex light shows to ensure consistent performance.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
