1. Introduction
This manual provides essential information for the safe and effective use of your IP66 Waterproof Trail Camera. Designed for outdoor applications such as farm supervision, wildlife observation, and home security, this camera offers 1080P HD video recording and clear imaging capabilities day and night. Please read all instructions carefully before use to ensure optimal performance and longevity of your device.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture beyond its IP66 rating.
- Handle with care to avoid cuts or injuries.
3. Package Contents
Ensure all items are present upon unboxing:
- 1 x Trail Camera
- 1 x Straps (for mounting)
4. Specifications
| Feature | Description |
|---|---|
| Waterproof Rating | IP66 (suitable for severe weather conditions) |
| Display Screen | 2.0 inch |
| Video Resolution | 1080P HD |
| Photo Size Options | 24M, 16M, 12M, 8M, 5M, 3.0M, 1.30M, 0.3M |
| PIR Sensing Distance | Up to 10 meters |
| Trigger Time | 0.7 seconds |
| Camera Memory | Supports up to 128GB (SD card not included) |
| Language Systems | English, Chinese (Simplified), Chinese (Traditional), Japanese, Korean, Russian, French, German, Portuguese, Polish, Turkish, Thai |
| Dimensions (Approx.) | 135mm (5.3in) Height x 100mm (3.9in) Width x 55mm (2.2in) Depth |
| Weight (Approx.) | 0.362 kg |
5. Setup
5.1. Battery Installation
The camera requires batteries for operation (not included). Open the camera casing to access the battery compartment. Insert the required number of AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
5.2. SD Card Insertion
Insert a compatible SD card (up to 128GB, not included) into the designated slot. Ensure the card is inserted correctly until it clicks into place. The camera will not record without an SD card.
5.3. Initial Configuration (TEST Mode)
Before deployment, it is recommended to configure the camera settings in TEST mode:
- Pull the switch to the TEST position. The screen will display continuously.
- Navigate through the menu using the directional buttons to set the language, date, and time.
- Adjust photo and video settings (resolution, capture delay, etc.) as desired.
5.4. Mounting the Camera
Use the provided straps to securely mount the camera to a tree, pole, or other stable surface. Ensure the camera is positioned to capture the desired area, keeping in mind the PIR sensing distance of up to 10 meters.
6. Operating Modes
6.1. Switch Button Functions
- OFF: Turns off the camera.
- TEST: Bright screen mode. The screen displays continuously, allowing for parameter adjustments. This mode consumes power quickly.
- ON: Recording mode. The screen turns black after a 5-second countdown, and the sensor begins working. The camera records when motion is detected within the monitoring range. This mode is designed for low power consumption during active monitoring.
6.2. Video Recording Mode
- Pull the switch to the TEST position.
- Short press the "left button" (directional button). The time color in the upper right corner of the screen will turn red, indicating that the camera has started recording.
6.3. Photography Mode
- Pull the switch to the TEST position.
- Short press the "down button" (directional button) to switch to camera mode. The icon in the upper left corner of the display screen will change to a camera icon.
- Short press the "left button" (directional button) to capture a photo.
6.4. Viewing Captured Content
- Pull the switch to the TEST position.
- Press the "E" button to enter the album and browse your photos and videos.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and casing. Avoid abrasive cleaners or solvents.
- Battery Check: Regularly check battery levels, especially before long deployments. Replace all batteries simultaneously with new ones to ensure consistent power.
- SD Card Management: Periodically format the SD card to maintain optimal performance and prevent data corruption. Back up important footage before formatting.
- Environmental Protection: While the camera is IP66 waterproof, avoid submerging it in water or exposing it to extreme conditions beyond its rating.
8. Troubleshooting
- Camera not turning on: Check if batteries are inserted correctly and fully charged. Ensure the switch is not in the OFF position.
- No photos/videos recorded: Verify that an SD card is inserted and has sufficient free space. Check camera settings to ensure it's in the correct recording mode (ON).
- Poor image/video quality: Clean the camera lens. Ensure the camera is mounted stably and not subject to excessive vibration. Check resolution settings.
- PIR sensor not triggering: Ensure the camera is in ON mode. Check for obstructions in front of the PIR sensor. Adjust camera placement to optimize detection range.
- Screen remains bright in ON mode: Ensure the switch is fully in the ON position. The screen should turn black after a 5-second countdown in ON mode. If it remains bright, it might be stuck in TEST mode.
9. User Tips
- Battery Life: For extended use, consider using high-capacity alkaline or rechargeable batteries. Always carry spare batteries for quick replacement in the field.
- SD Card Capacity: A 128GB SD card can store a significant amount of footage, but for continuous monitoring, regularly check the remaining space or set the camera to overwrite older files if supported.
- Optimal Placement: Position the camera to avoid direct sunlight on the lens, which can cause glare. Angle it slightly downwards to capture wildlife effectively without triggering false alarms from swaying branches.
10. Warranty & Support
Manufacturer Information
Manufacturer: Feiruilande Shenzhen Shangmao Co., Ltd.
Address: CN-3B01-50, Building A1, 1983 Creative Town, No. 29, Nanxin Street, Nanling Village, Nanwan Street, Longgang District, Shenzhen
Tel: 86-13927483703
EU Authorized Representative
Representative: SOLID AUTHORITY LIMITED
Address: 51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland
Customer Service
For specific product usage instructions not covered in this manual, or if you have any questions, please contact the store customer service staff where you purchased the product.
11. Compliance Information
This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers are responsible for assessing which requirements and regulations apply based on the actual product type, function, and destination market.