THINKCAR TP T90 Pro TPMS Activation Tool User Manual

1. Product Introduction

The THINKCAR TP T90 Pro is a professional Tire Pressure Monitoring System (TPMS) service tool designed for comprehensive tire health management. It offers a wide range of functionalities including activation, reading, relearning, and programming of TPMS sensors. This plug-and-play tool is compatible with a vast array of American, European, and Asian manufactured vehicles.

The device activates pressure information by receiving signals via low or high radio frequency and can reset the TPMS module through the OBD port. It is an ideal choice for performing TPMS system diagnostics and general OBDII diagnostics.

2. Device Components and Functions

Familiarize yourself with the main components of the THINKCAR TP T90 Pro and their respective functions:

3. Setup and Connection

3.1 Connecting the OBDII (EOBD) Diagnostic Cable

1. Locate your vehicle's Data Link Connector (DLC) port. This is typically found under the dashboard on the driver's side.
2. Connect the OBDII diagnostic cable from the THINKCAR TP T90 Pro to the vehicle's DLC port. This connection is necessary for OBD diagnosis functions and TPMS learning.

Note:

• The DLC port is used for activation or programming functions. Attempting to charge the tool via the OBD diagnostic port will consume the vehicle's battery power. It is not recommended to charge the tool this way, except during diagnosis operations.
• If the tool is properly connected to the vehicle's DLC, it will be charged automatically during operation.

4. Operating Instructions

4.1 Check Sensor

This function allows you to activate TPMS sensors and view sensor data such as ID, tire pressure, frequency, temperature, and battery condition.

1. For initial use, navigate to the TPMS function menu by selecting the vehicle manufacturer, model, and year.
2. Select 'Activate Sensor' and press the activation button on the tool.
3. For universal sensors, place the tool alongside the valve stem, pointing towards the sensor location, and press the button.

Notes on Sensor Activation:

• For early magnet-activated sensors, place a magnet over the stem before positioning the tool alongside the valve stem.
• If the TPMS sensor requires tire deflation (approx. 10 PSI), deflate the tire, then place the tool alongside the stem while pressing the button.
• Once successfully activated and decoded, the tool will beep, and the screen will display sensor data with a tick.
• If a sensor fails to trigger, an icon will appear next to the wheel position.
• Abnormal sensor data will be displayed in red.

Interpreting Sensor Data:

• ID: Indicates the sensor ID.
• P: Indicates the tire pressure.
• T: Indicates the tire temperature.
• Vol: Indicates the battery power level.

4.2 Program Sensor

This function allows you to program sensor data to THINKCAR sensors, useful for replacing faulty sensors or those with low battery life. The THINKCAR TP T90 Pro supports programming up to 8 sensors simultaneously.

Programming Options:

• CREATE SENSOR: Programs a THINKCAR sensor with a randomly generated ID. Select the wheel, place a THINKCAR sensor close to the tool's TPMS antenna, and select 'CREATE SENSOR'.
• MANUAL INPUT: Allows manual entry of a sensor ID. You can enter either a random ID or the original sensor ID if available.
• COPY ID BY ACTIVATE: Writes the retrieved original sensor data to a new THINKCAR sensor after the original sensor has been triggered.
• CREATE MULTI-SENSOR (1-8): Programs multiple sensors (up to 8) at the same time.

Notes on Programming:

• If a random ID is used for programming, a TPMS Relearn function must be performed afterward.
• If the original ID is used, a Relearn function is not necessary.
• If the vehicle does not support the relearn function, use the Manual Input option to enter the original sensor ID, or trigger the original sensor at the activation interface to obtain its information before programming the THINKCAR sensor.

4.3 Relearn Sensor

The Relearn function is crucial for writing newly programmed sensor IDs into the vehicle's ECU, allowing the vehicle to recognize the new sensors. This operation is only required when the new sensor IDs differ from the original IDs stored in the vehicle's ECU.

Example Relearn Procedure (e.g., MERCEDES B Class 2014~2018 - Automatic/OBD):

1. Inflate all tires to the nominal pressure value as indicated on the tire label (usually found on the door frame).
2. Follow the on-screen prompts to 'Learn the new sensor ID'.

5. Maintenance and Firmware Update

5.1 Firmware Update

Regular firmware updates ensure your THINKCAR TP T90 Pro has the latest features and vehicle model coverage. The device offers free lifetime firmware updates.

General Guidance:

• Refer to the 'HELP - Software update guide' on your tool for detailed instructions.
• Using Google Chrome browser is recommended for downloading update packages to avoid potential issues.

Step-by-Step Update Process:

1. Download: Visit www.thinkcar.com/downloads and download the appropriate TPMS.exe installation file for Windows.
2. Install Software: Run the downloaded TPMS.exe file on your computer to install the update tool.
3. Prepare SD Card: Insert the THINKCAR TP T90 Pro's SD card into a card reader, then connect the card reader to your computer.
4. Run Update Tool: Launch the installed update software. Select 'TF' (for SD card), choose your target language, and click 'OK'.
5. Device Upgrade: Once the SD card is connected and recognized by the computer, the software will automatically detect the device's serial number. Click 'Device Upgrade' to begin the update process.

6. Troubleshooting

• Sensor Activation Issues: If a sensor fails to trigger, an icon will appear next to the wheel position. Ensure the tool is correctly positioned and the sensor is functional. If sensor data appears abnormal, it will be displayed in red, indicating a potential issue with the sensor or reading.
• Firmware Update Problems: If you encounter issues during firmware download (e.g., corrupted files), try using Google Chrome browser. If the device cannot be turned on or functions incorrectly after an update, contact customer service for assistance and the latest firmware link.
• Radio/TV Interference: If the device causes harmful interference to radio or television reception, try the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

7. Specifications

8. User Tips

• Power Management: Always ensure the tool is adequately charged via the Type-C port for stable operation. While the OBD connection provides power, it is not recommended as the primary charging method to avoid draining the vehicle's battery unnecessarily.
• Vehicle Selection: For accurate TPMS functions, always correctly select your vehicle's manufacturer, model, and year in the tool's menu before proceeding with sensor checks or programming.
• Programming & Relearn: Pay close attention to whether you are programming a sensor with a random ID or an original ID. Random IDs will always require a subsequent TPMS Relearn procedure to be performed on the vehicle, whereas original IDs typically do not.
• Firmware Updates: When performing firmware updates, use a stable internet connection and the recommended browser (Google Chrome) to ensure the download package is complete and uncorrupted. If you encounter issues with multi-language support or device power-on after an update, contact THINKCAR customer service for direct assistance.

9. Warranty and Support

THINKCAR provides comprehensive support for your TP T90 Pro device:

9.1 Warranty Information

• Technical Support: Lifetime technical support is provided.
• Limited Warranty: A 12-month warranty covers damages caused by defects in materials or workmanship.
• Exclusions: The warranty does not cover damages resulting from abuse, unauthorized modification, use for non-designed purposes, or operation in a manner not specified in the instructions.
• Limitation of Liability: Compensation for dashboard damage caused by a defect of this equipment is limited to repair or replacement of the device. THINKCAR is not liable for any indirect or incidental losses.

9.2 Customer Support

• Service Line: 1-909-757-1959
• Customer Service Email: support@mythinkcar.com
• Official Website: For product tutorials, videos, FAQs, and coverage lists, please visit the official THINKCAR website.

10. Regulatory Information

10.1 FCC Requirement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

10.2 IC Requirement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

11. Documents and Resources

For a detailed user manual in PDF format, please refer to the official document:

• THINKCAR TPMS90 User Manual (PDF)
• For more information and support, visit the THINKCAR Global website.