1. Introduction
The KINGBOLEN S6 Elite is an advanced 2025 NEW version automotive diagnostic tool designed for comprehensive vehicle analysis and maintenance. This all-in-one scanner offers a wide range of capabilities for both DIY enthusiasts and professional technicians, ensuring efficient and accurate problem identification and resolution.
What's In The Box?
Image: KINGBOLEN S6 Elite package contents.
- S6 Elite Tablet
- Diagnostic Cable
- Type-C Cable
- Product Use Manual
- Outer Box
2. Key Features
The KINGBOLEN S6 Elite diagnostic scan tool is equipped with a comprehensive set of features for daily repair and maintenance services, offering an affordable alternative to expensive OE-level scanners.
Highlights of the 2025 NEW Version:
- Lifetime Free Software Update: Enjoy continuous updates without subscription fees, ensuring access to the latest functions and vehicle coverage.
- Bi-Directional Control Test/Active Test: Send commands to the vehicle ECU to test actuator working status, pinpointing problematic components efficiently.
- CAN FD Protocol Support: Compatible with CAN-FD protocol, supporting the latest GM vehicles manufactured after 2020 and other new cars, offering 5X faster data transmission.
- FCA AutoAuth: Supports FCA AutoAuth for FCA vehicles (Chrysler, Dodge, Fiat, etc.) after 2017, allowing diagnostic functions without a 12+8 adapter (requires AutoAuth account).
- Renault Security Gateway Unlocking: Newly added function for 2019+ Renault SGW vehicles to perform service functions and active tests.
- 15+ Reset Services: Covers most maintenance needs including Oil/EPB/SAS/BMS/ABS Bleed/Injector resets and more.
- OE-level All System Diagnosis: Scan all available car systems to read/clear codes, view live data, freeze frame data, and ECU information.
- Multi-language Support: Supports 28 languages, eliminating regional limitations.
- Automatic VIN Scan: Automatically identifies vehicle information with one click (manual VIN entry available if needed).
- DTC Lookup Library & Built-in Browser: For quick fault code definitions and online queries.
- Diagnostic Report/Record/Feedback: Generate, share, and record diagnostic reports.
- Voltage Monitoring & Screenshot: Additional thoughtful features for enhanced usability.
Image: Overview of Full System OBD2 Scanner capabilities.
Image: Extensive vehicle compatibility for the S6 Elite.
3. Setup Guide
Initial Device Setup
- Unpack the Device: Carefully remove the S6 Elite tablet, diagnostic cable, and USB cable from the packaging.
- Power On: Press and hold the power button to turn on the device.
- Language Selection: Follow the on-screen prompts to select your preferred language from the 28 available options.
- Wi-Fi Connection: Connect the device to a stable Wi-Fi network to enable software updates and online features.
- Software Update: Perform a 'One-Touch upgrade via WiFi' to ensure your device has the latest software version, vehicle coverage, and performance improvements.
Connecting to Vehicle
- Locate OBD-II Port: Identify the vehicle's 16-pin OBD-II diagnostic port, usually located under the dashboard on the driver's side.
- Connect Diagnostic Cable: Plug one end of the diagnostic cable into the S6 Elite tablet and the other end into the vehicle's OBD-II port.
- Ignition On: Turn the vehicle's ignition to the 'ON' position (engine off).
- Automatic VIN Scan: The device will attempt to automatically identify your vehicle's make, model, and year. If Auto VIN fails, you can manually enter the VIN.
- FCA AutoAuth (if applicable): For 2018+ FCA vehicles, you may need to log in to your pre-purchased FCA AutoAuth account on the device to access full diagnostic functions.
4. Operating Instructions
Full System Diagnosis
The S6 Elite can scan all available vehicle systems to perform OE-level diagnostics.
- Read/Clear DTCs: Display detailed Diagnostic Trouble Codes (DTCs) and clear them after repairs.
- Read ECU Information: Access information about the control units, including unit type and version numbers.
- View Live Data: Monitor real-time data streams from various sensors in text, waveform, or 4-in-1 graph formats.
- Freeze Frame Data: View a snapshot of sensor values recorded at the moment a fault occurred.
Bi-Directional Control / Active Test
This function allows the scanner to send commands to the vehicle's ECU to test specific components, helping to quickly identify faulty parts without disassembly.
Image: Bi-Directional Control / Active Test functionality.
Examples of Active Tests:
- A/C Compressor Clutch Relay On/Off
- Fuel Injector Tests
- Cycling ABS Pump Motor
- Rolling Up/down Car Windows/Doors/Sunroof
- Cooling Fan Motor Command
- EVAP Tests (Purge Solenoid Valve, Vent Solenoid Valve)
15+ Reset Functions
The S6 Elite supports over 15 common maintenance reset services:
Image: Overview of 15 Daily Use Reset Functions.
- Oil Reset: Resets the oil service light after an oil change.
- Elec. Throttle Adaptation: Initializes the throttle actuator to its initial state.
- SAS Reset (Steering Angle Reset): Resets the steering angle sensor after relevant repairs.
- Battery Matching: Performs resetting operations on the vehicle battery monitoring unit.
- ABS Bleeding: Bleeds the brake system to restore ABS brake sensitivity.
- Brake Reset: Resets the brake pad warning light after brake pad replacement.
- DPF Regeneration: Clears Particulate Matter from the DPF filter.
- Gear Learning: Learns crankshaft gear machining tolerance for accurate engine misfire diagnosis.
- Injector Coding: Writes or rewrites injector codes to the ECU for precise fuel injection control.
- EGR Adaption: Learns the EGR valve after cleaning or replacement.
- Airbag Reset: Resets airbag data to clear collision fault indicators.
- A/F Reset: Sets or learns Air/Fuel ratio parameters.
- AdBlue Reset (Diesel Engine Exhaust Gas Filter): Required after replacing or filling diesel exhaust treatment fluid.
- ECU Reset: Res Resets the Engine Control Unit.
Full OBD2/EOBD2 Functions
- Reading Codes: Displays detailed DTCs.
- Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
- Data Stream: Reads and displays live ECU/PCM data stream.
- I/M Readiness Status: Checks if emission-related systems are operating correctly.
- View Freeze Frame Data: Shows vehicle conditions at the time of an emission-related fault.
- O2 Sensor Test: Retrieves and displays O2 sensor monitor test results.
- On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components.
- Read Vehicle Information: Displays VIN, CID, and CVN.
- Component Test: Actuates certain vehicle components to test operability.
Additional Features
- DTC Lookup Library: Built-in database for fault code definitions.
- Google Chrome Query DTC: Conveniently query unclear DTC codes online.
- Maintenance Report: Generate and email diagnostic reports.
- Data Recording and Playback: Record and review diagnostic data.
- Voltage Monitoring: Monitor battery voltage.
5. Maintenance
Software Updates
The KINGBOLEN S6 Elite offers lifetime free software updates. Connect the device to Wi-Fi and navigate to the 'Upgrade' section on the main menu to perform a one-touch update. Regular updates ensure your scanner has the latest vehicle compatibility, diagnostic functions, and performance enhancements.
General Care
- Keep the device clean and free from dust and moisture.
- Store the device in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
- Use only the provided cables and accessories.
6. Troubleshooting
Common Issues and Solutions
- Device not powering on: Ensure the device is fully charged or connected to a power source. Check the USB cable connection.
- No communication with vehicle: Verify the diagnostic cable is securely connected to both the S6 Elite and the vehicle's OBD-II port. Ensure the vehicle's ignition is in the 'ON' position. Check if the vehicle is compatible with the scanner.
- Inaccurate readings or functions not working: Ensure the software is up-to-date. Some functions (Bi-directional Control, Special Functions) vary by vehicle model, make, and year. Always check compatibility before attempting specific operations.
- Auto VIN not working: If the Auto VIN feature does not automatically identify your vehicle, manually enter the VIN. Not all vehicles have VIN programmed to their ECU for automatic detection.
- FCA vehicle access issues: For 2018+ FCA vehicles, ensure you have a registered and active FCA AutoAuth account and have logged in through the device. An additional adapter cable may be required for some FCA vehicles to bypass the security gateway.
7. Specifications
| Feature | Specification |
|---|---|
| Item Name | KINGBOLEN S6 Elite |
| Communication Interface | OBD-II |
| Free Update Period | Lifetime |
| Display Resolution | 1024*600 |
| Display Size | 6.2 inches Touchscreen |
| Software Update | Yes (Lifetime Free via WIFI) |
| Language Support | Arabic, Czech, Danish, Dutch, English, French, German, Italian, Japanese, Polish, Portuguese, Russian, Spanish, and more (28 languages total) |
| Software Version | 2025 NEW Version |
| Hardware Version | 2025 NEW Version |
| Operating System | Android 8.1 |
| CPU | MT8167 Cortex-A53 Quad-core 1.8GHz |
| RAM + ROM | 3GB + 32GB (System Display: 32GB) |
| Battery | 3.8V/4150mAh |
| Wi-Fi | 2.4GHz |
| Certification | CE |
| Package Dimensions | 260mm x 163mm x 75mm |
8. User Tips
- Always ensure your S6 Elite is connected to a stable Wi-Fi network and updated to the latest software version for optimal performance and the widest vehicle coverage.
- Before performing any special functions or active tests, double-check the compatibility with your specific vehicle's make, model, and year to avoid potential issues.
- For FCA vehicles, remember to register and log in to an AutoAuth account if you plan to use advanced diagnostic features.
- Utilize the built-in DTC Lookup Library and Google Chrome browser for quick understanding of fault codes and additional research.
9. Warranty and Support
Warranty Information
The KINGBOLEN S6 Elite comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
Technical Support
For technical assistance, troubleshooting, or any questions regarding the operation of your KINGBOLEN S6 Elite, please refer to the official KINGBOLEN support channels. You can also utilize the 'Online Chat & Feedback' feature directly on the device for assistance.
