TrackerKing DK22

Contents

TrackerKing OBDII GPS Tracker DK22 User Manual

Model: DK22

Your guide to seamless vehicle tracking and monitoring.

1. Introduction

The TrackerKing OBDII GPS Tracker DK22 is a compact, plug-and-play device designed for real-time vehicle tracking and monitoring. It offers a range of features including location tracking, various alarms, and remote vehicle control capabilities, making it an ideal solution for personal and fleet management.

TrackerKing OBDII GPS Tracker front view
Front view of the TrackerKing OBDII GPS Tracker DK22.

2. Product Overview

2.1 Key Features

  • Real-time GPS Tracking via app and web platform
  • History Route Playback
  • Over-speed Alarm
  • Vibration Alarm
  • Geo-fence (alarm for entering/exiting defined areas)
  • Power Cut-off Alert
  • Plug Out Alert
  • Low Battery Alert (device sends alert when voltage is below 3.45V)
  • ACC Status Detection
  • Engine Shut-off (remote control via app/platform)
  • SMS and Call Tracking capabilities
  • Plug & Play installation (wireless, no wiring required)
Overview of Mini OBD GPS Tracker features
Key features of the TrackerKing OBDII GPS Tracker.

2.2 Components

The TrackerKing DK22 is a single, compact unit designed to plug directly into your vehicle's OBDII port. It includes a slot for a SIM card (not included) for data communication.

TrackerKing OBDII GPS Tracker showing SIM card slot
Side view of the tracker, revealing the SIM card slot.

3. Specifications

FeatureSpecification
ModelDK22
Connectivity2G or 4G (version dependent)
GPS ModuleYes
Special FeaturesInternet Connected
Screen SizeNo screen
Battery Life5 to 9 Hours (internal backup battery)
VoltageCompatible with standard OBDII vehicle voltage (typically 12V)
Dimensions (L x W x H)60mm x 43mm x 20mm
CertificationCE
Dimensions of the TrackerKing OBDII GPS Tracker and key features icons
Physical dimensions and highlighted features of the device.

4. Setup

4.1 SIM Card Installation

  1. Ensure the vehicle is turned off.
  2. Locate the SIM card slot on the side of the TrackerKing DK22 device.
  3. Insert a activated Nano-SIM card (not included) with data plan into the slot, ensuring it is correctly oriented until it clicks into place.

4.2 Device Installation

The TrackerKing DK22 is a plug-and-play device that connects directly to your vehicle's OBDII port. No complex wiring is required.

  1. Locate your vehicle's OBDII port. In most vehicles, the OBDII interface is located under the steering wheel, often in areas labeled 'A' or 'B' in diagrams.
  2. Align the tracker with the OBDII port and firmly push it in until it is securely connected.
  3. Once plugged in, the device will power on automatically.
Diagrams showing typical OBD installation locations in a vehicle
Common OBDII port locations in vehicles.
Image demonstrating the plug-and-play OBD installation in a car interior
Demonstration of the simple plug-and-play installation.

4.3 App & Platform Setup

To access tracking features, download the 'TrackerKing' application or use the web platform.

  • Web Platform: Visit www.trackerking.net
  • Mobile App: Scan the QR codes below to download the 'TrackerKing' app from the App Store (iOS) or Google Play Store (Android).
Information on the tracking platform, app download QR codes, and demo account
Tracking platform details and app download QR codes.

Demo Account Credentials:

  • Account: Demo100
  • Password: TrackerKing100

After installation, log in to the app or web platform using your registered account to begin tracking.

Screenshots of the TrackerKing mobile application interface
Screenshots of the TrackerKing mobile application.

5. Operating Instructions

5.1 Real-time Tracking

Once the device is installed and connected to the platform, you can view your vehicle's current location, addresses, and routes in real-time through the mobile app or web interface.

Mobile phone displaying real-time tracking on a map
Real-time tracking displayed on a mobile device.

5.2 Alarm Functions

Configure various alarms through the app or web platform:

  • Over-speed Alarm: Receive alerts if the vehicle exceeds a predefined speed limit.
  • Vibration Alarm: Get notified if the vehicle experiences unusual vibrations or impacts.
  • Geo-fence Alarm: Set up virtual boundaries; receive alerts when the vehicle enters or exits these areas.
  • Low Power Alarm: The device will send an alert if its internal backup battery voltage drops below 3.45V.
  • Power Cut-off Alert: Notifies you if the device is disconnected from the vehicle's power source.
  • Plug Out Alert: Alerts you if the device is removed from the OBDII port.
Illustration of low power alarm
Low power alarm notification.

5.3 Engine Shut-off

The device supports remote engine shut-off functionality. This feature allows you to send commands via the app or tracking platform to control the vehicle's engine (e.g., cut off fuel supply). Use this feature responsibly and only when necessary.

Illustration of the engine shut-off feature via app/platform
Remote engine shut-off command via the app.

5.4 Application Scenes

The TrackerKing DK22 is suitable for a wide range of vehicles and applications, including:

  • Personal Cars
  • Buses
  • Trucks
  • Electric Vehicles
  • Motorcycles
  • Taxis
Application scenarios for the GPS tracker
Various vehicle types compatible with the TrackerKing DK22.

6. Maintenance

  • Keep the device clean and free from dust and moisture.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Do not attempt to open or modify the device, as this will void the warranty and may cause damage.
  • Ensure the SIM card is properly inserted and has an active data plan for continuous tracking.

7. Troubleshooting

  • Device not powering on: Ensure the device is firmly plugged into the OBDII port. Check the vehicle's OBDII port for power issues.
  • No GPS signal: Ensure the vehicle is in an open area with a clear view of the sky. GPS signals may be weak or unavailable in underground parking, tunnels, or dense urban areas.
  • No data/offline: Verify that the SIM card is correctly inserted, activated, and has sufficient data balance. Check network coverage in the vehicle's location.
  • Inaccurate location: GPS accuracy can be affected by environmental factors. Allow some time for the device to acquire a stable signal.
  • Alarms not working: Check alarm settings within the TrackerKing app or web platform to ensure they are correctly configured and enabled.

8. User Tips

  • For optimal performance, ensure your SIM card has a stable 2G or 4G network connection, depending on your device version.
  • Regularly check the device's status via the app to ensure it's online and functioning correctly.
  • Familiarize yourself with the geo-fence feature to create custom alerts for important locations like home or work.
  • Keep your app and platform login credentials secure.

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your TrackerKing OBDII GPS Tracker DK22, please contact your seller or refer to the official TrackerKing website for support resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.