Estardyn 1.54 TFT

Contents

Estardyn 1.54-inch TFT Display Module with EC11 Rotary Encoder and IIC Interface

User Manual

1. Introduction

This manual provides detailed instructions for the Estardyn 1.54-inch TFT Display Module, which integrates a vibrant 240x240 pixel Thin-Film Transistor (TFT) LCD screen, an EC11 rotary encoder with a push-button, and an IIC (I2C) communication interface. Designed for hobbyists and engineers, this module is ideal for various microcontroller projects, offering both visual output and user input capabilities in a compact form factor.

2. Product Overview

2.1 Features

  • Display Type: 1.54-inch TFT LCD
  • Resolution: 240x240 pixels
  • Interface: IIC (I2C) for LCD screen communication
  • Input: Integrated EC11 Rotary Encoder with Push Button
  • Compatibility: Designed for use with microcontrollers like Arduino
  • Customization: Yes (indicated as 'is_customized')

2.2 Components

The module consists of the TFT display, the rotary encoder, a push button, and a set of header pins for connection to a microcontroller. The images below illustrate the key components and their layout.

Front view of the 1.54-inch TFT display module with EC11 rotary encoder, button, and header pins.
Figure 1: Front view of the Estardyn 1.54-inch TFT Display Module. This image shows the active display area, the rotary encoder on the right, a push button below the encoder, and a row of header pins along the top edge. The module is blue with white silkscreen markings.
Back view of the 1.54-inch TFT display module, showing the pinout labels.
Figure 2: Back view of the Estardyn 1.54-inch TFT Display Module. This image clearly labels the connection pins: GND, VDD, SCL, SDA, RES, DC, BLK, TRA, TRB, PSH, KO. The PCB traces are visible on the blue board.

3. Specifications

Attribute Value
Model Number 1.54 TFT
Type TFT
Brand Name Estardyn
Origin Mainland China
Resolution 240x240
Display Mode 240*240
Is Customized Yes
High-concerned chemical None
Approximate Dimensions (L x W x H) 10 cm x 7 cm x 1 cm
Approximate Weight 0.03 kg

4. Setup Instructions

4.1 Pinout Description

Refer to Figure 2 for the physical pin locations. The module features the following pins:

  • GND: Ground connection.
  • VDD: Power supply input (typically 3.3V or 5V, depending on the specific display controller and voltage regulator on board. Consult module documentation or test with 3.3V first).
  • SCL: I2C Clock line for the display.
  • SDA: I2C Data line for the display.
  • RES: Reset pin for the TFT display. Connect to a digital output pin on your microcontroller.
  • DC: Data/Command pin for the TFT display. Connect to a digital output pin on your microcontroller.
  • BLK: Backlight control pin. Connect to a digital output pin for backlight on/off control, or to a PWM pin for brightness adjustment.
  • TRA: Rotary Encoder Channel A output. Connect to a digital input pin on your microcontroller.
  • TRB: Rotary Encoder Channel B output. Connect to a digital input pin on your microcontroller.
  • PSH: Push Button output for the rotary encoder. Connect to a digital input pin on your microcontroller.
  • KO: Encoder Common or additional output pin. This pin's function can vary; it may be a common ground for the encoder or an additional signal. Consult specific examples for its usage.

4.2 Wiring to a Microcontroller (e.g., Arduino Uno)

The following is a general wiring guide. Specific pin assignments may vary based on your microcontroller and chosen libraries.

Module Pin Arduino Uno Pin (Example) Description
GND GND Ground connection
VDD 3.3V or 5V (check module compatibility) Power supply
SCL A5 (SCL) I2C Clock
SDA A4 (SDA) I2C Data
RES Digital Pin (e.g., D9) Display Reset
DC Digital Pin (e.g., D8) Display Data/Command
BLK Digital Pin (e.g., D7) Backlight Control
TRA Digital Pin (e.g., D2 - interrupt capable) Encoder Channel A
TRB Digital Pin (e.g., D3 - interrupt capable) Encoder Channel B
PSH Digital Pin (e.g., D4) Encoder Push Button
KO Digital Pin (optional, or GND) Encoder Common/Additional Pin

Note: Ensure your microcontroller's logic level is compatible with the module's operating voltage. Use level shifters if necessary.

4.3 Software Setup

To use the module with Arduino, you will typically need to install relevant libraries:

  1. Display Library: Search for Arduino libraries compatible with 1.54-inch 240x240 TFT displays using an I2C interface. Common display drivers for TFTs are ST7789, but an I2C interface for a TFT of this size is less common and may require a specific library or an I2C-to-SPI bridge library. Adafruit GFX Library is a common dependency for many display drivers.
  2. Rotary Encoder Library: Libraries like 'RotaryEncoder' or 'Encoder' can simplify reading the rotary encoder's rotation and button press.
  3. Installation: Install libraries via the Arduino IDE's Library Manager (Sketch > Include Library > Manage Libraries...).
  4. Example Code: Refer to the examples provided with the libraries or search for specific examples for a "1.54-inch 240x240 I2C TFT with EC11 encoder" for your chosen microcontroller.

5. Operating Instructions

5.1 Display Operation

After successful wiring and software setup, you can control the display:

  • Initialization: Call the display's initialization function in your setup code. This typically involves setting up the I2C communication and configuring the display controller.
  • Drawing: Use library functions to draw pixels, lines, rectangles, circles, text, and images.
  • Color: Most TFT displays support 16-bit or 18-bit color. Refer to your display library's documentation for color codes.
  • Backlight: Control the BLK pin to turn the backlight on/off or use PWM for brightness adjustment.

5.2 Rotary Encoder Operation

The EC11 rotary encoder provides both rotational input and a push-button function:

  • Rotation: By monitoring the TRA and TRB pins, your code can detect clockwise or counter-clockwise rotation. This is typically done using interrupts for responsiveness.
  • Button Press: The PSH pin changes state when the encoder knob is pressed. Use a digital read to detect this event. Debouncing the button input in software is recommended to prevent false readings.

6. Maintenance

  • Handling: Handle the module by its edges to avoid touching the display surface or sensitive electronic components.
  • Cleaning: Use a soft, lint-free cloth, slightly dampened with water or an electronics-safe cleaner, to gently wipe the display surface if needed. Avoid abrasive materials.
  • Storage: Store the module in an anti-static bag in a dry, cool environment when not in use.
  • Power: Always ensure correct voltage and polarity when connecting power to prevent damage.

7. Troubleshooting

  • Display Not Lighting Up:
    • Check VDD and GND connections for proper voltage and polarity.
    • Ensure the BLK pin is correctly connected and set to an 'ON' state (usually HIGH).
    • Verify that the display initialization code is running correctly.
  • No Image on Display / Garbled Output:
    • Double-check SCL, SDA, RES, and DC pin connections.
    • Confirm that the correct display library and driver are used for an I2C 240x240 TFT.
    • Ensure I2C address is correct (if configurable).
    • Verify power supply voltage is stable and sufficient.
  • Rotary Encoder Not Responding:
    • Check TRA, TRB, PSH, and KO connections.
    • Ensure input pins are configured with internal pull-up resistors if external ones are not used.
    • Verify that your code correctly reads the encoder pins and handles debouncing for the button.
    • Confirm that interrupt routines (if used) are correctly attached and configured.
  • Module Not Detected by Microcontroller:
    • Verify all power and ground connections.
    • Check for short circuits or loose connections.
    • Ensure the microcontroller's I2C pins are correctly initialized.

8. User Tips

  • Start Simple: Begin with basic display initialization and text output before moving to complex graphics or encoder integration.
  • Consult Examples: Always look for example code specific to your microcontroller and display driver combination.
  • Power Supply: Ensure your power supply can provide enough current for both the display and the microcontroller, especially if using the backlight at full brightness.
  • Debouncing: Implement software debouncing for the rotary encoder's push button to ensure reliable input readings.
  • Interrupts for Encoder: For responsive rotary encoder input, consider using external interrupts on your microcontroller for the TRA and TRB pins.

9. Warranty and Support

For technical support, specific driver information, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.