iScooter iSCOOTER W6

Contents

iScooter W6 Electric Scooter User Manual

Model: iSCOOTER W6

1. Important Safety Information

Please read this manual carefully before operating your iScooter W6 Electric Scooter. Failure to follow the instructions and safety warnings could result in serious injury or damage to the scooter.

1.1 General Safety Guidelines

  • Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, when riding.
  • Ensure you are familiar with and comply with all local laws and regulations regarding electric scooter use.
  • Do not ride in adverse weather conditions, such as heavy rain, snow, or icy conditions.
  • Avoid riding on slippery surfaces, loose gravel, or uneven terrain.
  • Maintain a safe distance from other vehicles, pedestrians, and obstacles.
  • Do not perform stunts or sudden maneuvers.
  • Keep both hands on the handlebars while riding.
  • Do not allow children under the recommended age to operate the scooter.
  • Do not exceed the maximum weight limit of the scooter.

1.2 Battery and Charging Safety

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

  • Use only the original charger provided with the scooter.
  • Do not charge the scooter unattended.
  • Charge the scooter in a well-ventilated area, away from flammable materials.
  • Do not expose the battery to extreme temperatures (hot or cold).
  • If the battery is damaged or leaking, do not use the scooter and contact support.
  • Store the scooter and battery in a cool, dry place.

2. Product Overview

Familiarize yourself with the main components of your iScooter W6 Electric Scooter.

Diagram showing the labeled components of the iScooter W6 Electric Scooter.
Figure 2.1: iScooter W6 Component Diagram. Key components include Display, Throttle, Headlight, Hanger, Stem, Folding Knob, Kickstand, Charging Port, Rear Fender, Hook, Taillight & Brake Light, Disc Brake, Bell, Brake Lever, Folding Buckle.

2.1 LCD Intelligent Riding Display

The LCD display provides essential riding information at a glance.

Close-up of the LCD display on the iScooter W6 handlebars, showing various indicators.
Figure 2.2: LCD Display Indicators. Shows Real-time Speed, Speed Unit (km/h, mph), Riding Mode (ECO, D, S), Cruise Control status, App Connected status, Error Prompt, Headlight on indicator, Motor Overheating warning, and Battery Level.

3. Setup and Assembly

Your iScooter W6 comes partially assembled. Follow these steps to complete the setup.

3.1 Unboxing and Package Contents

Carefully remove all components from the packaging. Verify that all items are present:

Image showing all items included in the iScooter W6 package.
Figure 3.1: Package Contents. Includes: iScooter Instruction manual*1, European standard cable*1, L-type hexagonal wrench*1, Stand screws*6 (including 2 spares), Charger, Inflatable inner tube*1, Extension tube*1.

3.2 Handlebar Assembly

  1. Lift the stem to an upright position until it locks securely.
  2. Attach the handlebars to the top of the stem. Ensure the cables are not pinched.
  3. Use the provided L-type hexagonal wrench and screws to secure the handlebars firmly.

3.3 Initial Charging

Before your first ride, fully charge the scooter's battery.

  1. Locate the charging port on the scooter (refer to Figure 2.1).
  2. Connect the charger to the charging port, then plug the charger into a power outlet.
  3. The charging indicator on the charger will typically show red during charging and turn green when fully charged.
  4. Charging time is approximately 5-6 hours.
  5. Disconnect the charger once charging is complete.

3.4 Tire Inflation

Ensure tires are properly inflated for optimal performance and safety.

  • Use the provided extension tube to access the tire valve.
  • Inflate the 10-inch pneumatic tires to the recommended pressure (check tire sidewall for specific PSI/Bar).

4. Operating Instructions

4.1 Folding and Unfolding

The iScooter W6 features a 5-second foldable design for easy portability and storage.

Image demonstrating the folding mechanism of the iScooter W6, showing it being carried and placed in a car trunk.
Figure 4.1: Fast Folding Design. The scooter is compact and lightweight, offering quick two-step folding for easy portability and multi-scene storage.
Side view of the iScooter W6 in its folded state.
Figure 4.2: 5S Foldable Design. The scooter folds quickly for convenient transport and storage.
  • To Unfold: Release the folding buckle/knob (refer to Figure 2.1) and lift the stem until it clicks into place. Ensure it is securely locked before riding.
  • To Fold: Press the folding knob/release mechanism and carefully lower the stem until it locks into the folded position.

4.2 Power On/Off

  • Power On: Press and hold the power button on the LCD display for a few seconds until the display illuminates.
  • Power Off: Press and hold the power button again until the display turns off.

4.3 Riding Modes and Speed Adjustment

The iScooter W6 offers multiple speed modes to suit different riding environments.

Diagram illustrating the four speed modes: Walk, ECO, D, and S, with their respective speeds.
Figure 4.3: Speed Mode Demonstration Interface. Shows Walk Mode (6KM/H), ECO Mode (15KM/H), D Mode (25KM/H), and S Mode (35KM/H).
Image of a person riding the scooter with a table showing original and post-cracking speeds.
Figure 4.4: Speed Adjustment. Table compares original speeds (A: 6km/h, E: 15km/h, D: 25km/h, S: -) with post-cracking speeds (A: -, E: 15km/h, D: 25km/h, S: 35km/h).
  • Switching Modes: After turning on the device, simply short-press the power button to cycle through the modes (Walk, ECO, D, S).
  • Cracking Speed Method (to unlock higher speed): After turning on the device, hold the brake lever and press the power button five times consecutively to break the speed limit and enable the S mode's full speed (35km/h).

4.4 Braking System

The iScooter W6 is equipped with a dual braking system for enhanced safety.

Image showing the electronic brake lever and the rear disc brake with E-ABS system.
Figure 4.5: Front Electronic Brake & Rear Wheel Disc Brake. Features a ventilated disc brake and E-ABS anti-lock system for quick, efficient, and safer braking.
  • Front Electronic Brake: Activated by the brake lever on the left handlebar.
  • Rear Wheel Disc Brake: Provides additional stopping power and is equipped with an E-ABS anti-lock system.
  • Apply brakes smoothly and gradually to avoid sudden stops, especially at higher speeds.

4.5 Lights

The scooter is equipped with front LED headlights and a rear warning light for visibility.

Image showing the front LED headlights and rear warning light in operation.
Figure 4.6: Front LED Headlights and Rear Warning Light. Enhances visibility during low-light conditions.
  • The headlights can be turned on/off via the power button (short press) or through the app, depending on the model's specific controls.
  • The rear warning light typically activates with braking.

4.6 App Connectivity (Voltix APP)

Enhance your riding experience with the Voltix Smart APP.

Image showing a smartphone displaying the Voltix APP interface, connected to the scooter.
Figure 4.7: Voltix APP Smart APP. Provides enhanced control and convenience, including Ride Record, Cruise Control settings, Battery Usage monitoring, Acceleration settings, and Intelligent locking function.
  • Download the Voltix APP from your smartphone's app store.
  • Follow the in-app instructions to pair your iScooter W6 via Bluetooth.
  • The app allows you to monitor ride records, control cruise control, view battery usage, adjust acceleration settings, and utilize an intelligent locking function.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter.

5.1 Tire Care

The iScooter W6 features 10-inch wear-resistant pneumatic tires.

Cross-section diagram of the 10-inch pneumatic tire, showing its layers.
Figure 5.1: 10 Inch Wear-Resistant Pneumatic Tire. Features a rubber anti-puncture layer, inner liner layer, and anti-puncture protective layer for a durable and smooth ride.
  • Regularly check tire pressure and inflate to the recommended PSI/Bar.
  • Inspect tires for wear, cuts, or punctures before each ride.
  • If a tire is punctured, use the provided inflatable inner tube for replacement or seek professional assistance.

5.2 Battery Maintenance

The scooter is equipped with a 7.8Ah battery and a BMS (Battery Management System) for safety.

Image showing the scooter's battery compartment and icons representing battery safety features.
Figure 5.2: Long Life Battery & BMS. The 7.8Ah battery features a 6-layer safety protection system (SCP, OCP, DCP, ODP, TP, LVAS) for real-time monitoring of battery safety. Output: 42V 1.5A, Charging Time: 5-6H.
  • Avoid completely draining the battery. Charge it regularly, even if not in use for extended periods.
  • Store the scooter with a partial charge (around 50-70%) if storing for a long time.
  • Do not attempt to open or repair the battery pack.

5.3 General Cleaning and Storage

  • Clean the scooter with a damp cloth. Do not use high-pressure water or immerse the scooter in water.
  • Avoid using harsh chemicals that could damage the paint or electronic components.
  • Store the scooter in a dry, cool place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

This section addresses common issues you might encounter with your iScooter W6.

  • Scooter not turning on: Ensure the battery is charged. Check if the power button is pressed correctly.
  • Motor not engaging: Ensure the scooter is powered on and in a riding mode. Check for any error prompts on the LCD display (refer to Figure 2.2).
  • Reduced range or speed: Check tire pressure. Ensure the battery is fully charged. Riding in colder temperatures or on inclines can reduce performance.
  • Brakes not responding: Inspect brake levers and cables for damage or looseness. Ensure the disc brake is clean and free of obstructions.
  • Error Codes on Display: Refer to the LCD Intelligent Riding Display section (Figure 2.2) for potential error prompts. If an error persists, contact customer support.

7. Specifications

Detailed technical specifications for the iScooter W6 Electric Scooter.

Table of product specifications for the iScooter W6.
Figure 7.1: Product Specifications.
FeatureSpecification
Model NumberiSCOOTER W6
CategoryTwo-wheel Scooter
Applicable PeopleUnisex
Tire Size10 inch (Pneumatic)
Motor Power500W (Front-wheel drive brushless motor)
Voltage36V
Battery Capacity7.8Ah
Charger InputAC100-240V 50/60Hz
Charger OutputDC 42V 1.5A
Charging Time5-6 hours
Max Speed35 KM/H
Max Range Per Charge30 KM (up to 60km depending on conditions)
Max Incline15°
FoldedYes
Unfolded Size112*49*111 cm
Folded Size112*49*47 cm
Net Weight15 kg
CertificationCE

8. User Tips

  • Speed Limit Removal: To unlock the full speed of 35km/h, remember the 'brake lever + 5 power button presses' trick after turning on the scooter. This is a common feature for users seeking higher performance.
  • App Features: Don't forget to connect to the Voltix APP. It offers useful features like ride tracking, cruise control adjustments, and a locking function that can enhance your riding experience and security.
  • Tire Pressure: Regularly checking and maintaining correct tire pressure is crucial. It significantly impacts ride comfort, range, and tire longevity. Under-inflated tires can lead to punctures and reduced efficiency.
  • Folding for Storage: The quick-folding design is very convenient. Practice folding and unfolding a few times to get comfortable with it, especially if you plan to frequently transport it in a car or store it in tight spaces.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or on the official iScooter website. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.