1. Introduction
Thank you for choosing the AUX Smart Water Dispenser. This multi-functional appliance provides convenient access to hot, warm, and optionally cold water, featuring smart controls and a user-friendly design. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Figure 1: AUX Smart Water Dispenser
2. Key Features
- Dual Water Outlets: Separate outlets for different water temperatures.
- Smart Dual Display: Clear display for temperature and settings.
- Remote Control: Convenient operation from a distance.
- Voice Control: Hands-free operation for boiling and dispensing water.
- Multiple Temperature Settings: Precise temperature control from 45°C to 100°C.
- 24-Hour Insulation: Maintains desired water temperature for extended periods.
- 100°C True Boiling: Ensures water is fully boiled.
- Hidden Bottom-Load Water Bottle: Easy water bottle replacement without heavy lifting.
- Anti-Dry Burning Protection: Automatic shutdown for safety.
- Child Safety Lock: Prevents accidental operation.
- Efficient Electronic Cooling (Ice/Warm/Hot models): Provides cold water between 8°C and 15°C.
3. Setup Instructions
3.1 Unpacking and Placement
- Carefully remove the water dispenser from its packaging.
- Place the unit on a flat, stable surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- The foldable backrest design allows for easy setup right out of the box.
3.2 Water Bottle Installation
This dispenser features a hidden bottom-load design, eliminating the need to lift heavy water bottles. It accommodates standard water bottles up to 18.9 liters.

Figure 2: Hidden bottom-load water bottle compartment
- Open the lower compartment door.
- Place the water bottle (up to 18.9L) into the compartment.
- Insert the water pipe from the dispenser into the water bottle opening.
- Close the compartment door.
3.3 Kettle Installation
The kettle features an upgraded heating element. Ensure it is correctly placed on the heating plate for proper function and safety.

Figure 3: Kettle installation guide
- Align Water Pipe: Align the water pipe with the water outlet.
- Align Screw Holes: Ensure the screw holes are aligned between the backrest and the main unit.
- Tighten Screws: Secure the backrest by tightening the 3 screws.
3.4 Power Connection
Connect the power cord to a 220V AC power outlet. Ensure the correct plug adapter is used for your region.

Figure 4: Available plug adapters
4. Operating Instructions
4.1 Control Panel Overview
The water dispenser features a simple touch control panel and a smart dual display for easy operation.

Figure 5: Touch control panel details
4.2 Water Dispensing and Temperature Control
The dispenser offers multiple precise temperature settings to suit various needs:
- 45°C: Ideal for milk.
- 60°C: Ideal for honey water.
- 70°C: Ideal for fruit tea.
- 85°C: Ideal for coffee.
- 90°C: Ideal for green tea.
- 95°C: Ideal for black tea.
- 100°C: For boiling water.

Figure 6: Display showing various temperature options
Touch Panel Functions:
- Insulation Zone: Double-click for insulation, long press to adjust insulation time.
- Heating Zone: Double-click for water dispensing, long press to adjust dispensing time. Single click for temperature adjustment.
The dispenser ensures 100°C true boiling, avoiding dry boiling.

Figure 7: 100°C boiling feature
4.3 Remote Control
Use the provided remote control for simple and quick operation, including boiling water and maintaining insulation, without needing to get up.

Figure 8: Remote control functionality
4.4 Voice Control
The smart voice control feature allows you to operate the dispenser with simple voice commands:
- Wake word: "小爱, 小爱" (Xiao Ai, Xiao Ai)
- Commands include: "水壶取水" (Kettle dispense water), "水壶加热" (Kettle heat), "沸水模式" (Boiling water mode), "打开保温" (Turn on insulation), "取常温水" (Dispense room temperature water), "增大音量" (Increase volume), "减小音量" (Decrease volume), "制冷打开" (Turn on cooling).

Figure 9: Voice control interface
5. Maintenance
5.1 Cleaning
The touch panel is designed for easy cleaning. Regularly wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
5.2 Kettle Care
The kettle features a three-layer insulation design for safety and efficiency. Ensure the kettle is always placed correctly on the heating plate. If the kettle is not properly seated, it will not operate.

Figure 10: Kettle with 3-layer insulation
6. Troubleshooting
6.1 Common Issues and Solutions
- Kettle not heating or E1 error: Ensure the kettle is correctly placed on the heating plate. The anti-dry burning function and child safety lock will prevent operation if the kettle is not detected or if water levels are too low. The unit automatically cuts power when the set temperature is reached.
- Residual water stains: It is normal for some residual water stains to be present in the pipes, faucets, or on the countertop after manufacturing tests. This does not indicate a defect.
- Kettle cracking (especially in cold regions): In very cold environments, especially northern regions, pre-warm the glass kettle by adding about one-fifth of hot water, swirling it around, and then pouring it out before filling completely. This helps prevent cracking.
- Noise during operation: The term "silent" in the context of water dispensers is relative. The primary sound produced by AUX products is fan noise from the motor's operation, which is normal. No product is absolutely silent.
- Boiling point not reaching 100°C: In high-altitude areas (above 1300m), the boiling point of water is naturally lower than 100°C. This is a physical phenomenon and not a product quality issue.

Figure 11: Safety features: Anti-dry burning and child lock
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AUX (HAOYUNMA) |
| Power Source | AC |
| Voltage | 220V |
| Certification | CE |
| Water Outlet Location | Overhead double faucet |
| Temperature Adjustable | Yes |
| Display Screen | Yes |
| Refrigeration Control System | Electronic temperature control |
| Water Temperature Options | Cold, Warm, Hot (Ice is warm, warm) |
| Max Water Bottle Capacity | 18.9L |
| Product Dimensions (W x D) | 320mm x 305mm |
| Product Height (varies by model) | 920mm (rotating faucet), 1015mm (cup holder backrest), 1030mm (white model), 1000mm (black/grey models) |
| Package Dimensions (L x W x H) | 49cm x 40cm x 40cm |
| Package Weight | 16.0 kg |
Note: Manual measurements may have a 1-3cm error. Product appearance and dimensions may vary slightly between models (e.g., rotating faucet vs. cup holder backrest, different colors). Two versions (with/without logo on backrest) are shipped randomly.

Figure 12: Dimensions for cup holder backrest model

Figure 13: Dimensions for rotating faucet model

Figure 14: Dimensions for different models

Figure 15: Water bottle size compatibility
8. Warranty and Support
The product comes with a free return policy within 90 days. Additionally, there is a fast delivery guarantee which includes:
- A $1.00 coupon code if delivery is delayed.
- Refund if the package is lost.
- Refund if items are damaged.
- Refund if no delivery within 30 days.
For any issues or support, please contact the seller directly.
9. User Tips
- To prevent glass kettle cracking in cold weather, pre-warm it with a small amount of hot water before filling.
- Do not be concerned about minor residual water stains; these are normal from factory testing.
- Always ensure the kettle is properly seated on its heating plate for safe and correct operation.
- Utilize the voice control feature for hands-free convenience, especially when busy or for ease of use for elderly and children.