Introduction
The GuliKit Hyperlink 2 Wireless Adapter (Model PC05) is designed to provide ultra-low latency wireless connectivity for a wide range of game controllers across multiple platforms. Experience seamless gaming with its advanced wireless technology, offering a fast and reliable connection without the need for complex driver installations.
Key features include:
- Ultra-low latency connection (as low as 2.95ms).
- Wireless Dynamic Channel Selection Technology for higher polling rates and less delay.
- Simpler pairing process with no button press required on the adapter during initial pairing.
- Automatic recognition, switching, and reconnection to paired platforms.
- Support for motion control and vibration when using PS4/PS5 controllers with Nintendo Switch/Switch 2.
- Plug-and-play functionality, eliminating the need for driver installation.
Image: GuliKit Hyperlink 2 Wireless Adapter highlighting its broad compatibility.
Setup
The GuliKit Hyperlink 2 Wireless Adapter is designed for easy plug-and-play use. No driver installation is required for most systems.
Pairing Instructions:
- Prepare your Controller: Turn on your game controller and activate its pairing mode. For PS4 and PS5 controllers, hold down the SHARE button and the PS logo button simultaneously until the controller's light bar begins to flash rapidly.
- Connect the Adapter: Plug the GuliKit Hyperlink 2 adapter into an available USB port on your desired platform (e.g., PC, Nintendo Switch dock, Android device). The adapter's indicator light will flash rapidly, automatically entering pairing mode. No button press is required on the adapter itself.
- Confirm Pairing: Once the controller and adapter successfully connect, the adapter's indicator light will turn constant on, and the controller's light will stabilize, indicating a successful pairing.
Image: The GuliKit Hyperlink 2 adapter plugged into a laptop, ready for pairing.
Operating Instructions
General Operation:
- After initial pairing, the adapter will automatically recognize, switch between, and reconnect to your previously paired platforms and controllers.
- For Windows platforms, the adapter uses the Xinput protocol standard for broad compatibility with games.
Nintendo Switch/Switch 2 Specifics:
- When using the adapter with Nintendo Switch 2, ensure that "Wired Pro Controller Connection" is enabled in the system settings for optimal performance.
- The adapter supports motion control and vibration functions when using PS4 or PS5 controllers with Nintendo Switch and Switch 2 consoles, enhancing your gameplay experience.
Image: Illustration of motion control and vibration support for PS4/PS5 controllers on Nintendo Switch.
Maintenance
To ensure the longevity and optimal performance of your GuliKit Hyperlink 2 Wireless Adapter, please follow these simple maintenance guidelines:
- Keep the adapter clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the adapter to extreme temperatures, humidity, or direct sunlight.
- Store the adapter in a safe place when not in use to prevent physical damage.
- Do not attempt to disassemble or modify the adapter, as this will void the warranty and may cause damage.
Troubleshooting
Common Issues and Solutions:
- Adapter not pairing:
- Ensure your controller is fully charged and in pairing mode (refer to your controller's manual for specific instructions).
- Make sure the adapter is securely plugged into a powered USB port.
- Try unplugging and re-plugging the adapter, then re-attempt the pairing process.
- Controller not recognized after pairing:
- Verify that the adapter's indicator light is solid, indicating a successful connection.
- Restart your gaming platform (PC, Switch, etc.) and try reconnecting.
- For Nintendo Switch 2, confirm that "Wired Pro Controller Connection" is enabled in the system settings.
- Lag or connection instability:
- The adapter uses Bluetooth technology. If you experience interference, try to use 5GHz Wi-Fi networks instead of 2.4GHz, as 2.4GHz can interfere with Bluetooth signals and potentially reduce polling rates.
- Ensure the adapter is not obstructed and is within reasonable range of the controller.
- Older Xbox One/Elite controllers not working:
- Xbox One wireless controllers manufactured between 2013 and 2015, and original Xbox Elite wireless controllers, do not have built-in Bluetooth functionality. These controllers are not supported by the GuliKit Hyperlink 2 adapter. Only Xbox One controllers with Bluetooth (newer models) and Xbox Series/Elite Series 2 controllers are compatible.
Image: Explanation of unsupported older Xbox controllers due to lack of Bluetooth.
Specifications
| Feature | Detail |
|---|---|
| Product Name | GuliKit Hyperlink 2 Wireless Controller Adapter |
| Model Number | PC05 |
| Brand | GuliKit |
| Accessories Type | Adapter |
| Controller Compatibility | GuliKit controllers, Xbox One Bluetooth controllers, Xbox Series controllers, Xbox Elite Series 2 controllers, PS4 Dual Shock, PS5 Dual Sense, PS5 Dual Sense Edge, Switch Pro controllers. |
| Platform Compatibility | Windows 7 or later, Android 9.0 or later, Nintendo Switch, Nintendo Switch 2, SteamOS Holo 3.4 or later. |
| Polling Rate & Latency (Examples) |
|
| Package Includes | 1x Wireless Controller Adapter |
Image: Detailed diagram of compatible controllers.
Image: Platform compatibility details, including note on OTG cables.
Image: Polling rate and latency comparison table.
User Tips
- Check Controller Bluetooth: Before purchasing or attempting to connect, always verify that your specific controller model has Bluetooth functionality. Older versions of some controllers (e.g., early Xbox One models) may lack Bluetooth and will not be compatible with this adapter.
- Optimize Wireless Environment: If you experience any wireless interference or reduced performance, consider using a 5GHz Wi-Fi network if available, as 2.4GHz Wi-Fi can sometimes interfere with Bluetooth signals.
- OTG Cable for Handhelds: For certain handheld devices like Steam Deck, AYANEO, ROG Ally, or Switch Lite, an additional OTG (On-The-Go) cable or adapter may be required to connect the GuliKit Hyperlink 2.
Warranty and Support
GuliKit products are manufactured to high-quality standards. For any issues or support inquiries, please refer to the official GuliKit website or contact their customer service. Keep your proof of purchase for warranty claims.
