1. Product Overview
This manual provides essential information for the installation, maintenance, and safe use of the original 180mm stainless steel brake disc designed specifically for the Teverun FighterSupreme 7260R Smart Electric Scooter. This brake disc is suitable for both front and rear wheel applications, ensuring optimal braking performance and durability.

2. Specifications
| Feature | Specification |
|---|---|
| Product Type | Brake Disc |
| Model Compatibility | Teverun FighterSupreme 7260R |
| Disc Diameter | 180mm |
| Material | Stainless Steel |
| Application | Front or Rear Wheel |
| Customization | No |
| Package Weight (approx.) | 0.2 kg |
| Package Dimensions (approx.) | 10cm x 10cm x 10cm |
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged.
- 1 x Teverun FighterSupreme 7260R 180mm Brake Disc
4. Installation / Setup
Safety Warning: Brake system components are critical for safe operation. If you are not confident in your mechanical abilities, it is highly recommended to seek professional assistance for installation.
Required Tools (Not Included):
- Hex key set (appropriate sizes for brake disc bolts)
- Torque wrench (for proper bolt tightening)
- Wheel removal tools (if necessary for your scooter model)
- Brake cleaner and clean rags
Installation Steps:
- Prepare the Scooter: Ensure the electric scooter is powered off and placed on a stable stand or surface to prevent it from moving during installation.
- Remove the Wheel: Depending on whether you are replacing the front or rear brake disc, you may need to remove the corresponding wheel from the scooter. Consult your scooter's user manual for specific wheel removal instructions.
- Remove the Old Brake Disc: Locate the bolts securing the old brake disc to the wheel hub. Use the appropriate hex key to carefully loosen and remove these bolts. Keep the bolts in a safe place if they are to be reused.
- Clean the Hub: Thoroughly clean the wheel hub's mounting surface where the brake disc attaches. Remove any dirt, grease, or old threadlocker residue using brake cleaner and a clean rag.
- Install the New Brake Disc: Align the new 180mm brake disc with the mounting holes on the wheel hub. Insert the bolts (use new ones if recommended by your scooter manufacturer or if the old ones are damaged).
- Tighten Bolts: Hand-tighten all bolts first to ensure proper alignment. Then, use a torque wrench to tighten the bolts to the manufacturer's specified torque settings. Tighten in a star pattern to ensure even pressure.
- Reinstall the Wheel: Reattach the wheel to the scooter, ensuring all axle nuts or quick-release mechanisms are securely fastened according to your scooter's manual.
- Test Brakes: Before riding, manually spin the wheel to check for any rubbing or misalignment. Squeeze the brake lever several times to ensure the brake pads engage correctly with the new disc. Perform a slow-speed test ride in a safe area to confirm proper braking function.

5. Maintenance
Regular maintenance of your brake disc is crucial for safety and longevity.
- Regular Inspection: Periodically inspect the brake disc for signs of wear, cracks, bends, or discoloration. Check for any loose bolts.
- Cleaning: Keep the brake disc clean from dirt, oil, and grease. Use a dedicated brake cleaner and a clean, lint-free cloth. Avoid using petroleum-based cleaners as they can contaminate brake pads.
- Brake Pad Check: Ensure your brake pads are not excessively worn. Worn pads can damage the brake disc and reduce braking efficiency.
- Bolt Torque: Occasionally check the torque of the brake disc mounting bolts to ensure they remain securely fastened.

6. Troubleshooting
If you experience issues with your brake disc, consider the following common problems and solutions:
- Squealing or Grinding Noise:
- Cause: Contaminated disc, worn brake pads, or improper alignment.
- Solution: Clean the disc with brake cleaner. Inspect and replace brake pads if worn. Check brake caliper alignment.
- Reduced Braking Performance:
- Cause: Contaminated disc/pads, air in hydraulic system (if applicable), or disc wear.
- Solution: Clean disc and pads. If hydraulic, bleed the brake system (professional service recommended). Inspect disc for excessive wear and replace if necessary.
- Wobbling or Pulsating Brakes:
- Cause: Bent or warped brake disc, loose wheel, or unevenly tightened bolts.
- Solution: Inspect the disc for warpage (a slight wobble is normal, but excessive wobble requires replacement). Ensure wheel is securely mounted and brake disc bolts are torqued correctly.
7. User Tips
- Always use genuine Teverun replacement parts to ensure compatibility and maintain scooter performance.
- After installing a new brake disc, it is recommended to 'bed in' the brakes by performing several moderate stops from a medium speed. This helps the pads conform to the new disc surface for optimal performance.
- Store your scooter in a dry environment to prevent rust and corrosion on brake components.
8. Warranty & Support
For warranty information or technical support regarding your Teverun FighterSupreme 7260R 180mm Brake Disc, please refer to the official Teverun website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.