FMS F-18 Super Hornet 80mm EDF Jet

Contents

FMS 80mm F-18 Super Hornet EDF Jet User Manual

Model: F-18 Super Hornet 80mm EDF Jet

1. Product Overview

The FMS 80mm F-18 Super Hornet EDF Jet is a high-performance radio-controlled aircraft model designed for intermediate to advanced pilots. This Plug-N-Play (PNP) version includes most electronic components pre-installed, requiring only a compatible transmitter, receiver, battery, and charger to get airborne. Crafted from durable EPO foam, it features a detailed scale appearance and advanced flight capabilities, including functional flaps and retractable landing gear.

FMS 80mm F-18 Super Hornet EDF Jet on a white background
The FMS 80mm F-18 Super Hornet EDF Jet.

2. Safety Information

WARNING: This is a hobby product, not a toy. Adult supervision is required for users under 14 years old. Improper installation or operation may cause injury or damage.

  • Stop operation immediately if abnormal vibration, noise, or failure occurs.
  • Do not fly in strong wind, rain, fog, or bad weather conditions.
  • Keep away from people, buildings, power lines, and roads.
  • Operate only in safe and open areas, free from obstacles.
  • Read all warnings and instructions carefully before use.
  • This plane is intended for experienced and advanced pilots only.
  • Improper usage and adjustment will result in crashes and damage to the item.
  • Experience is required prior to handling this product.

3. Specifications

Feature Detail
Wingspan980 mm
Overall Length1350 mm
Flying Weight / Takeoff WeightAround 3400g - 3500g
Motor Size3280-KV2100 inner running brushless motor
ESC100A with 8A BEC
Servo13g Metal Gear Servo*10
Control Channels6 channels (Radio not included)
CG (Center of Gravity)70-78 mm (From Leading Edge)
Ducted Fan Size80mm 12-blade
Recommended Battery22.2V 4000-7000mAh 40C (not included)
AileronYes
ElevatorYes
RudderYes
FlapsYes
RetractsYes, 2x servoless retractable main gear, 1x servoless retractable rear gear
Approx. Flying Duration4-10 minutes (depending on battery and flight style)
Minimum Age Recommendation14+ years
Experience LevelIntermediate
Recommended EnvironmentOutdoor
Assembly Time20 minutes (approx.)
Assembly RequiredYes
MaterialDurable EPO Foam
Power SourceElectric
Plugs TypeXT90 plug
Charging Voltage14.8V
Charging Time1 hour (approx.)
Diagram showing dimensions of the FMS F-18 Super Hornet
Key dimensions of the FMS 80mm F-18 Super Hornet.

4. Package Contents (PNP Version)

The Plug-N-Play (PNP) package includes everything except the transmitter, receiver, battery, and charger. Specifically, it contains:

  • FMS 80mm F-18 Super Hornet airframe with pre-installed motor, ESC, and servos.
  • Original Box
  • Operating Instructions (this manual)
  • All necessary hardware for assembly (screws, linkages, etc.)

Note: Glue is not included in the package due to air shipment restrictions. Please prepare your own suitable adhesive for EPO foam.

Exploded view of FMS F-18 jet parts for assembly
Components included in the PNP package (glue not shown).

5. Installation Guide

Follow these steps for proper assembly and pre-flight checks:

  1. Inspect Parts: Check all components for damage or defects before beginning assembly.
  2. Install Accessories: Install all accessories (wings, tail, landing gear, etc.) in their correct position and orientation.
  3. Fasten Screws: Secure all screws properly, but do not over-tighten to avoid stripping or damaging the foam.
  4. Test Moving Parts: Before the first flight, ensure all control surfaces (ailerons, elevator, rudder, flaps) and retractable landing gear move freely and correctly.
  5. Complete Ground Test: Perform a full ground test of all systems (motor, ESC, radio control, battery, etc.) before the first flight.
Close-up of FMS F-18 jet landing gear
Detail of the retractable landing gear system.

6. Operating Instructions

Operating the FMS 80mm F-18 Super Hornet requires familiarity with RC aircraft controls and safe flying practices. Ensure your transmitter is properly bound to the receiver and all control surfaces respond correctly to stick inputs. Always perform a range check before flying.

  • Pre-Flight Check: Verify battery charge, control surface movement, motor function, and landing gear operation.
  • Takeoff: Choose a clear, open area. Apply throttle smoothly and maintain directional control with the rudder. Once sufficient speed is gained, gently apply elevator to lift off.
  • Flight: Practice smooth control inputs. Utilize the 6 channels for ailerons, elevator, rudder, throttle, flaps, and retractable landing gear. The F-18 is capable of various maneuvers.
  • Landing: Reduce throttle and deploy flaps as needed to slow the aircraft. Maintain a controlled descent and aim for a smooth touchdown on the main landing gear, followed by the nose gear.
  • Post-Flight: Disconnect the battery immediately after flight. Inspect the aircraft for any damage.
Demonstration of the FMS F-18 Super Hornet in flight.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your RC jet:

  • Clean all parts after each flight to remove dirt, dust, or debris.
  • Regularly check propellers, screws, and linkages for tightness and wear.
  • Replace damaged parts (e.g., foam, control horns, servos) in a timely manner to prevent further issues.
  • Store the aircraft in a dry and clean environment, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues during operation, consider the following common troubleshooting steps:

  • No Power/Motor Not Spinning: Check battery connection, ensure battery is charged, verify ESC is armed, and check motor/ESC wiring.
  • Loss of Control/Erratic Behavior: Re-bind transmitter and receiver, check for radio interference, inspect control linkages for looseness or damage.
  • Poor Flight Performance: Verify Center of Gravity (CG) is within recommended range, check for warped control surfaces, ensure all control throws are set correctly.
  • Landing Gear Issues: Check servo connections to the retracts, ensure no debris is obstructing the mechanism, verify proper power supply to the retracts.

9. User Tips

  • Always ensure your flight battery is fully charged and properly balanced before each flight.
  • Perform a thorough visual inspection of the aircraft before every takeoff, checking for loose parts, cracks, or damage.
  • Consider using a flight simulator to practice maneuvers before attempting them with your actual model.

10. Warranty and Support

This product comes with a 1-month warranty for factory defects or shipping damage. If you receive defective or incorrect items, please contact the manufacturer for support.

Manufacturer: Foshan Zhengze Model Technology Co., LTD
Address: Unit A, Building 6, Jicheng Science Technology Innovation Park, Shunde, Foshan city, Guangdong province, 528306, China
Email: fmsmodel@yeah.net

EU Responsible Information:
Company Name: E-CrossStu GmbH
Address: Felix-Dahn-Str 4 70597 Stuttgart
Email: E-CrossStu@web.de

For additional guides and documents, you may refer to the official user manual PDF: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.