1. Overview
The realme Buds T500 Pro are advanced True Wireless Stereo (TWS) earphones designed for an immersive audio experience. Featuring 50dB Active Noise Cancellation (ANC) and 6-Mic Deep Noise Cancellation, they provide clear sound and calls. With Bluetooth 6.1 connectivity, AAC, SBC, and LHDC audio codecs, and an IP55 rating for water and dust resistance (earbuds only), these earbuds are built for performance and durability. The charging case extends battery life significantly, offering up to 56 hours of playback.
2. Package Contents
Please check the box for the following items:
- realme Buds T500 Pro Headphones (Left x1, Right x1)
- Charging Case x1
- Silicone Ear Tips (S/M/L) x3 pairs (M-tips are pre-installed)
- User Guide and Warranty Card x1
- USB Type-C Charging Cable (not explicitly listed but standard for charging case)
3. Setup
3.1. Wearing the Earphones
- Choose the silicone ear tips that best fit your ears for optimal comfort and sound isolation.
- Insert the earbuds into your ear canals and gently twist them until they feel secure and comfortable.
3.2. Initial Pairing
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED light on the case or earbuds.
- On your smartphone or Bluetooth device, go to Bluetooth settings and search for available devices.
- Select "realme Buds T500 Pro" from the list to connect.
- Once connected, the LED indicator will stop flashing.
3.3. Reconnecting
The earbuds will automatically reconnect to the last paired device when taken out of the charging case and the device's Bluetooth is enabled.
3.4. realme Link App
Download the realme Link app from your device's app store to unlock additional features, customize touch controls, update firmware, and manage noise cancellation settings.
4. Operating Instructions
4.1. Touch Controls
The realme Buds T500 Pro feature intuitive touch controls on each earbud. Common functions include:
- **Single Tap:** Play/Pause music, Answer/End call.
- **Double Tap:** Next track, Decline call.
- **Triple Tap:** Previous track.
- **Long Press (Left/Right Earbud):** Switch between Noise Cancellation modes (ANC On/Transparency/ANC Off).
4.2. Active Noise Cancellation (ANC)
The earbuds offer 50dB Active Noise Cancellation to reduce ambient noise. You can cycle through ANC On, Transparency Mode, and ANC Off using the long-press touch control or via the realme Link app.
4.3. Charging
Place the earbuds back into the charging case to charge them. Connect the charging case to a power source using a USB Type-C cable. The LED indicator on the case will show the charging status.
5. Maintenance
- **Cleaning:** Regularly clean the ear tips, charging contacts on both earbuds and case, and the mesh screens with a dry, soft cotton swab. Avoid using liquids or abrasive materials.
- **Storage:** Store the earbuds in their charging case when not in use to protect them and keep them charged.
- **Water Resistance:** The earbuds are IP55 water and dust resistant, meaning they can withstand splashes and sweat. Do not submerge them in water or expose them to heavy rain. The charging case is not water resistant.
- **Battery Care:** To prolong battery life, avoid fully discharging the earbuds and charging case frequently. Charge them regularly, even if not in constant use.
6. Troubleshooting
- **Earbuds not pairing:** Ensure both earbuds are in the charging case, then open the lid. Check if the earbuds are charged. Try resetting the earbuds (refer to the realme Link app or full user manual for specific reset instructions).
- **Only one earbud working:** Place both earbuds back in the case, close the lid, wait a few seconds, then open it again. Re-pair with your device.
- **No sound or poor sound quality:** Check the volume on your device. Ensure ear tips are properly sealed in your ear. Clean any debris from the earbud mesh.
- **Charging issues:** Ensure the charging cable is securely connected to both the case and the power source. Clean the charging contacts on the earbuds and inside the case.
- **Bluetooth connection unstable:** Keep your device within the 10m connection range. Avoid obstacles between the earbuds and your device.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | realme |
| Model | Buds T500 Pro |
| Communication | Wireless |
| Bluetooth Version | 6.1 |
| Maximum Wireless Range | <10m |
| Noise Reduction | 50 dB Active Noise Cancellation, 6-Mic Deep Noise Cancellation |
| Sound Driver Size | 12.4mm Dynamic Bass Driver |
| Audio Codecs | SBC, AAC, LHDC |
| Waterproof | Yes (IP55 for earbuds only) |
| With Microphone | Yes |
| Active Noise-Cancellation | Yes |
| Charging Method | Charging case (Type C) |
| Earbud Battery Capacity | 62 mAh |
| Case Battery Capacity | 530 mAh |
| Music Playback (Earbuds + Case, ANC Off) | Up to 56 hours |
| Music Playback (Earbuds Only, ANC Off) | Up to 12 hours |
| Material | Plastic |
| Style | TWS in-ear headphones |
| Certification | CE |
| Origin | Mainland China |
| Case Dimensions | 60.1 x 37.5 x 22.7mm |
| Case Weight | 43.5g |
8. User Tips
- Ensure earbuds are properly seated for optimal noise cancellation and sound quality.
- Regularly clean the ear tips and charging contacts to maintain performance.
- Utilize the realme Link app for personalized settings and firmware updates.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the warranty card included in your package or visit the official realme website.
For a comprehensive guide, you can also refer to the official User Manual PDF: realme Buds T500 Pro User Manual (PDF)
