1. Introduction
Thank you for choosing the EASWEL BA15d LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. This bulb is designed as a replacement light source for various sewing machines, including Pfaff models 290, 330, 332, 360, 362, and 521. Its LED technology offers high brightness, long life, and low power consumption.
2. Product Specifications
| Feature | Specification |
|---|---|
| Base Type | BA15D |
| LED Quantity | 64-3014 SMD LEDs |
| Input Voltage | 110~120V AC / 220-240V AC |
| Power Consumption | Approximately 3W |
| Diameter | 18mm |
| Length | 52mm |
| Luminous Flux | 280 LM |
| Beam Angle | 360° |
| Color Temperature | White (6000~6500K) |
| Estimated Life Time | More than 30,000 hours |
| Package Weight | 0.027 kg |
| Package Dimensions | 10cm x 10cm x 3cm |
3. Safety Information
- Always disconnect power to the appliance before installing or replacing the bulb.
- Ensure the bulb's voltage rating matches your appliance's power supply.
- Do not touch the bulb with wet hands.
- Do not disassemble or modify the bulb.
- Keep out of reach of children.
- Dispose of old bulbs responsibly according to local regulations.
4. Installation
The BA15d LED Light Bulb is designed for simple installation. Follow these steps to replace your existing bulb:
- Disconnect Power: Before beginning, ensure your sewing machine or appliance is unplugged from the power outlet to prevent electrical shock.
- Remove Old Bulb: Carefully unscrew or unclip the old bulb from its socket. Allow it to cool down if it was recently in use.
- Insert New Bulb: Align the BA15d base of the new LED bulb with the socket. The BA15d base typically has two contact points at the bottom and two pins on the side that align with slots in the socket. Push the bulb into the socket and twist gently until it locks into place.
- Secure: Ensure the bulb is firmly seated in the socket.
- Restore Power: Plug your appliance back into the power outlet.
5. Operation
Once installed, the EASWEL BA15d LED Light Bulb operates like any standard light bulb in your appliance. Simply turn on the power switch of your sewing machine or fixture to illuminate the bulb. Turn off the switch to extinguish the light.
6. Maintenance
The LED light bulb requires minimal maintenance. To ensure optimal performance and longevity:
- Cleaning: If the bulb becomes dusty, gently wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials. Ensure the power is disconnected before cleaning.
- Inspection: Periodically check the bulb for any signs of damage or loose connections.
7. Troubleshooting
If your LED bulb is not functioning as expected, consider the following common issues:
- Bulb Not Lighting Up:
- Ensure the appliance is plugged in and receiving power.
- Check that the bulb is correctly seated and tightened in its socket.
- Verify that the appliance's light switch is in the 'ON' position.
- If replacing an old bulb, ensure the new LED bulb is compatible with your appliance's voltage (110-120V AC or 220-240V AC).
- Flickering Light:
- Ensure the bulb is securely installed.
- Check for loose wiring in the fixture (if accessible and you are qualified to do so).
- Some older dimmer switches may not be compatible with LED bulbs, causing flickering. This bulb is not specified for dimming.
If problems persist after checking these points, please contact customer support.
8. User Tips
- Energy Saving: LED bulbs consume significantly less power than traditional incandescent bulbs, leading to lower electricity bills.
- Longevity: With a lifespan of over 30,000 hours, this LED bulb will last much longer than conventional bulbs, reducing the frequency of replacements.
- Instant Brightness: LED bulbs provide instant full brightness without any warm-up time.
- Cooler Operation: LEDs generate less heat compared to incandescent bulbs, making them safer to touch and reducing heat buildup in your workspace.
9. Warranty and Support
Your EASWEL BA15d LED Light Bulb comes with the following guarantees:
- 30 Days Money Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
- 180 Days Free Exchange: In case of any defects or issues within 180 days of purchase, the product is eligible for a free exchange.
For any questions, concerns, or support needs, please contact our customer service. We are committed to resolving any issues to your satisfaction.