This manual provides detailed instructions for the installation, operation, and maintenance of your VEVOR Automatic Garage Door Opener. This powerful operator features an AC motor designed to move garage gates with a pulling and pushing force of either 800 N or 1000 N, depending on the model. It incorporates advanced technology for soft and smooth opening/closing, ensuring convenient and reliable operation for various garage door types.
Figure 1: Overview of the VEVOR Automatic Garage Door Opener and its components.
2. Important Safety Instructions
Children are strictly forbidden from touching the control devices of the garage door opener.
All maintenance and repair procedures for this product must be conducted by qualified professionals to ensure safety and proper function.
Ensure the installation area is clear of obstacles before operating the garage door.
Regularly inspect the garage door and opener for any signs of wear or damage.
In case of power failure, the self-lock design will engage to secure the door.
3. Package Contents
Please verify that all items listed below are included in your package:
1 x Garage Gate Opener (Main Unit)
2 x Remote Controls
1 x Set of Guide Rail (3 meters / 9.8 feet, chain drive)
1 x Set of Installation Accessories (brackets, screws, etc.)
1 x User Manual (this document)
NOTE: Garage gates are not included with this product.
The VEVOR Automatic Garage Door Opener is designed for convenient installation without requiring specialized electrical or welding skills. All necessary hardware for assembly is included in the package.
5.1 General Installation Overview
Figure 3: Installation diagram. A: Motor unit. B: Mounting bracket. C: Door attachment point. D: Safety sensor/limit switch area.
Follow the detailed instructions provided in the included User Manual for step-by-step assembly and mounting. Ensure the guide rail is securely attached and aligned with your garage door. Proper installation of safety sensors (if applicable) and limit switches is crucial for safe operation.
6. Operating Instructions
Your garage door opener can be operated using the provided remote controls or the control panel on the main unit.
6.1 Remote Control Operation
The opener comes with two wireless remote controls. These remotes allow you to open, close, or stop the garage door from a distance of over 25 meters (82 feet), and up to 50 meters in open areas. The remote controls utilize a rolling code for enhanced security.
Figure 4: Double-channel remote control for operating the garage door opener.
6.2 Control Panel Operation
The main unit features a control panel for direct operation and adjustments. This panel includes an adjusting button, a display screen, a set button, and a pause button.
Figure 5: Close-up of the control panel showing the adjusting button, display screen, set button, and pause button.
Refer to the detailed instructions in the included User Manual for programming remote controls and adjusting settings such as automatic closing and force limits.
6.3 Automatic Closing and Safety Features
The opener features adjustable automatic closing. It can also auto-read the running power and will stop if it encounters any obstacles during the opening or closing process, enhancing safety.
Figure 6: The self-lock mechanism ensures the door remains secure, even in case of power failure.
The unit operates with low noise, typically less than 60 dB, providing a quiet environment.
Video 1: Demonstration of the VEVOR Automatic Garage Door Opener in operation, showing the door opening and closing.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your garage door opener. All maintenance should be performed by qualified personnel.
Monthly Inspection: Check the garage door for proper balance. If the door is unbalanced, contact a professional for adjustment.
Lubrication: Periodically lubricate moving parts of the garage door (rollers, hinges, springs) as recommended by the garage door manufacturer. Do not lubricate the opener's drive chain unless specifically instructed.
Safety Reversal Test: Perform a safety reversal test monthly. With the door fully open, place a 1.5-inch (3.8 cm) object (like a 2x4 board laid flat) on the floor in the path of the door. Close the door. The door should reverse when it contacts the object. If it does not, adjust the closing force or contact a professional.
Remote Control Batteries: Replace remote control batteries (12V, 27A) as needed when the range decreases or the indicator light dims.
Cleanliness: Keep the area around the opener and the guide rail clean and free from debris.
8. Troubleshooting
If you encounter issues with your garage door opener, refer to the following common problems and solutions. For complex issues, contact a qualified technician.
Opener does not respond to remote or control panel:
Check if the opener is plugged in and receiving power.
Ensure remote control batteries are not depleted.
Verify the remote control is programmed correctly.
Check for any obstructions blocking the safety sensors.
Door opens but does not close:
Inspect safety sensors for alignment or obstructions. The sensor lights should be steady.
Check for any objects in the door's path.
Door reverses unexpectedly:
This indicates an obstruction or excessive closing force. Clear any obstructions.
Adjust the closing force settings (refer to the full user manual for specific steps).
Excessive noise during operation:
Check for loose hardware on the door or opener.
Lubricate moving parts of the garage door (rollers, hinges).
Ensure the chain is properly tensioned.
9. User Tips
Based on common user experiences, here are a few tips for optimal use:
For best remote control range, ensure there are no large metallic objects or other radio frequency interference sources between the remote and the opener unit.
Periodically check the chain tension. A properly tensioned chain should have a slight sag but not be excessively loose.
Always keep the area around the garage door clear to prevent accidental activation of safety features or damage to property.
10. Warranty and Support
VEVOR provides a one-year warranty for this product. For any after-sales problems or technical support, please contact VEVOR customer service. They are dedicated to resolving any issues you may encounter.
Related Documents - 800N/1000N Automatic Garage Door Opener
VEVOR Sliding Gate Operator MD550/MD370: Installation and Operation Guide Comprehensive guide for VEVOR Sliding Gate Operator models MD550 and MD370, covering installation, operation, safety, technical specifications, and troubleshooting. Learn how to efficiently and reliably automate your gate with VEVOR's quality tools.
VEVOR MD370 / MD750 Sliding Gate Operator User Manual & Installation Guide Comprehensive user manual and installation guide for VEVOR MD370 and MD750 Sliding Gate Operators. Includes safety instructions, technical specifications, detailed installation steps for the metal base, steel rack, and limit switches, electrical wiring diagrams, remote control pairing, power supply testing, maintenance tips, and a troubleshooting guide for common issues. Optimize your gate automation with this essential resource.
VEVOR Sliding Gate Operator Manual and Technical Specifications Comprehensive manual for VEVOR Sliding Gate Operators, including installation guides, technical parameters, safety instructions, troubleshooting, and maintenance for models like MD750, MD370, and PY600ACKMJ0000001V2.
