Introduction
Thank you for choosing the DEUKIO Airpro Series Spinning Fishing Reel. This manual provides essential information for the proper setup, operation, and maintenance of your new fishing reel. Designed for both saltwater and freshwater use, the Airpro series features a lightweight carbon fiber body, durable aluminum components, and advanced anti-corrosion technology to ensure a long and reliable service life.
Video: DEUKIO Airpro Series Product Overview and Features Demonstration
Key Features
- Lightweight Carbon Fiber Body: Reduces overall weight for comfortable handling and improved strength.
- Durable Gear System: Features a zinc alloy gear disc combined with a 7705 hard aluminum gear disc core, offering superior strength compared to stainless steel.
- Corrosion Resistance: Passivated zinc alloy gear disc and SWSRS5 sealed waterproof design at 5 key locations effectively prevent saltwater and vapor intrusion, extending the reel's lifespan and increasing rust prevention by 60%.
- Smooth Operation: No-gap balance anti-shake mechanism ensures stable high-frequency throwing and receiving, minimizing energy loss.
- Ambidextrous Design: Screw-in left and right interchangeable rocker arms for easy customization to your preferred hand.
- Anti-Entanglement Technology: Professional anti-explosion line throwing design for more accurate casting and reduced line tangles.
- Aluminum Oblique Mouth Cup: Large slanted mouth design for smoother line exit and reduced resistance, supporting long-range casting performance.
- Metal Thickened Wire Loop: Ensures smooth line flow without jamming, facilitating faster throwing and retrieval.
- Clear Unloading Force Alarm: Provides an audible alarm to protect the reel body and ensure a long service life, tested for over 300,000 rotations.
- Precision Bearings: Equipped with 6+1 precision stainless steel bearings for corrosion resistance, stability, and resistance to jamming.

Image: DEUKIO Airpro Series highlighting Carbon Fiber Light body, 240-hour salt spray test, 7075 hard aluminum gear disc core, and 168g weight.
Setup
- Attach Handle: The reel features screw-in left and right interchangeable rocker arms. To attach, simply screw the handle into the desired side of the reel body until secure. Ensure it is tightened firmly for stable operation.
- Spooling Line:
- Open the bail arm.
- Tie the fishing line to the spool using an appropriate knot.
- Close the bail arm.
- Begin winding the line onto the spool, ensuring even tension. The aluminum oblique mouth cup and metal thickened wire loop are designed to facilitate smooth line flow and prevent entanglement during spooling and casting.
- Fill the spool to about 1/8 inch (3mm) from the edge to prevent line overflow and tangles.
- Mounting to Rod: Securely attach the reel foot into the reel seat of your fishing rod. Tighten the reel seat nut until the reel is firmly in place.

Image: Screw-in left and right interchangeable rocker arms for easy setup.
Operating Instructions
- Casting:
- Hold the rod and reel comfortably.
- Open the bail arm.
- Use your index finger to hold the line against the rod.
- Swing the rod forward, releasing the line with your index finger at the peak of the cast.
- The anti-entanglement technology and smooth wire loop are designed for accurate and tangle-free casting.
- Retrieving:
- After casting, close the bail arm manually or by turning the handle.
- Turn the handle to retrieve the line. The no-gap balance anti-shake system ensures a smooth and stable retrieve.
- Drag Adjustment:
- The drag system is located on the front of the spool (large caliber unloading cover).
- Turn the drag knob clockwise to increase drag tension and counter-clockwise to decrease it.
- Adjust the drag to match the breaking strength of your line and the size of the fish you are targeting. A good starting point is to set the drag to about 25-30% of your line's breaking strength.
- The clear unloading force alarm will sound when the drag is engaged, indicating a fish is pulling line.

Image: No gap balance anti-shake system for stable casting and retrieval.

Image: Clear unloading force alarm device for effective drag management.
Maintenance
Regular maintenance will prolong the life and performance of your DEUKIO Airpro Series reel.
- Cleaning:
- After each use, especially in saltwater, rinse the reel thoroughly with fresh water. Do NOT submerge the reel.
- Wipe the reel dry with a soft cloth.
- The SWSRS5 sealed waterproof design helps protect internal components from water and salt.
- Lubrication:
- Periodically apply a small amount of reel oil to moving parts such as the handle knob, bail arm pivot points, and line roller.
- Apply a thin layer of reel grease to the main gear and pinion gear if you disassemble the reel for deeper cleaning (recommended annually or bi-annually depending on usage).
- Storage:
- Store your reel in a dry, cool place away from direct sunlight and extreme temperatures.
- Ensure the drag is loosened before storage to prevent compression of the drag washers.

Image: SWSRS5 Sealed waterproof design with silicone rings at 5 key locations.

Image: Passivated zinc alloy gear disc showing resistance to seawater and corrosion.
Troubleshooting
- Line Tangles/Wind Knots: Ensure your spool is not overfilled. Check for any nicks or burrs on the line roller or spool lip. Use proper casting technique. The anti-entanglement technology is designed to minimize this, but external factors can still contribute.
- Stiff Handle/Rough Retrieve: This could indicate a need for lubrication or cleaning. Check for debris in the gears or bearings. If the issue persists after cleaning and lubrication, inspect the bearings for damage.
- Drag Slipping/Too Tight: Ensure the drag washers are clean and properly seated. If the drag is slipping, it may need to be tightened. If it's too tight, loosen it. Over time, drag washers may wear and require replacement.
- Bail Arm Not Closing Properly: Check for any obstructions or bent components in the bail arm mechanism. A small amount of lubricant on the pivot points can help.
Specifications

Image: Detailed Product Information for Airpro Series models.
| Model | Speed Ratio | Braking (KG) | Net Weight (G) | Gross Weight (G) | Bearing | Line Capacity (MM/M) |
|---|---|---|---|---|---|---|
| 2000 | 5.2:1 | 6 | 168 | 216 | 6+1BB | 0.20/170 0.25/130 0.30/75 |
| 2500 | 5.2:1 | 8 | 169 | 218 | 6+1BB | 0.20/185 0.25/145 0.30/85 |
| 3000 | 5.2:1 | 8 | 195 | 265 | 6+1BB | 0.25/150 0.30/110 0.35/95 |
*All parameters are manually measured. Slight variations may occur.
Additional Specifications:
- Hand Direction: Ambidextrous
- Material: Carbon Fiber (body), Zinc Alloy + 7705 Hard Aluminum (gear disc core)
- Baits Type: Fake Bait
- Fishing Reels Type: Pre-Loading Spinning Wheel, OFFSHORE, Fishing Wheel, Hand Wheel, Distant Wheel, Raft Wheel, Trolling Reel, Jigging Reel
- Fishing Method: Throw, Spinning, Trolling, Spinning Wheel, Iron Plate
- Position: Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, LAKE, River, Reservoir Pond, Stream
User Tips
- Balance is Key: When pairing your Airpro reel with a fishing rod, aim for a balanced setup. A well-balanced rod and reel combo reduces fatigue and improves casting accuracy.
- Drag Setting Practice: Before heading out, practice setting your drag. Pull line directly from the spool to get a feel for the tension. This helps prevent line breakage when fighting a fish.
- Line Choice: The aluminum oblique mouth cup is designed for smooth line release. Experiment with different line types (monofilament, fluorocarbon, braid) to find what works best for your fishing style and target species.
- Saltwater Care: Even with the advanced waterproof design, always rinse your reel with fresh water after saltwater exposure. Pay extra attention to the line roller and drag knob area.
Warranty and Support
DEUKIO products are manufactured to high-quality standards. For any issues or inquiries regarding your Airpro Series Spinning Fishing Reel, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.