1. Introduction
This manual provides instructions for the installation, maintenance, and troubleshooting of replacement parts for Hurom HH-SBB11, HG-SBB11, and HG-SBE11 slow juicer models. These parts are designed to restore the functionality of your juicer. For complete operating instructions of the juicer itself, please refer to your original Hurom slow juicer user manual.
A detailed user manual in PDF format is also available for reference: View User Manual (PDF)
2. Package Contents
Your package includes the following 5 replacement parts:
- Juicing Bowl/Chamber
- Feeding Chute/Hopper
- Auger (Slow Press Screw)
- Fine Strainer (Filter Basket)
- Rotation Wiper (Frame with Silicone Wipers)
3. Specifications
| Feature | Detail |
|---|---|
| Model Numbers | HH-SBB11, HG-SBB11, HG-SBE11 |
| Type | Blender Parts (Juicer Accessories) |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 19 cm |
| Package Width | 20 cm |
| Package Height | 20 cm |
| Package Weight | 1.44 kg |
4. Setup and Installation
Follow these steps to correctly install the replacement parts:
- Align Interfaces: Carefully align the interfaces of each accessory with the corresponding slots on the juicer motor base or other parts.
- Tighten by Rotating: Once aligned, gently rotate the parts to tighten them securely into place. Ensure a snug fit.
- Secure Installation: Before powering on the juicer, double-check that all accessories are securely installed and properly seated.
Warning: Ensure all parts are correctly assembled and secured before operating the juicer to prevent damage or injury.
5. Operating Instructions
These items are replacement parts for your Hurom slow juicer. For detailed operating instructions on how to use the juicer, including preparing ingredients, feeding, and juicing techniques, please refer to the original user manual provided with your Hurom slow juicer.
6. Maintenance and Cleaning
Proper maintenance and cleaning will extend the lifespan of your juicer parts and ensure optimal performance.
- Prompt Cleaning: Disassemble and clean all accessories promptly after each use to prevent pulp and residue from drying and hardening.
- Easy Disassembly: The parts are designed for easy disassembly to facilitate thorough cleaning.
- Washing: Wash all removable parts with warm, soapy water. Use a brush to clean the fine strainer thoroughly.
- Drying: Ensure all parts are completely dry before reassembling or storing.
- Motor Base: Never immerse the motor section of the juicer in water. Wipe the motor base with a damp cloth if necessary.
7. Troubleshooting
If you encounter any issues with the replacement parts, refer to the following common problems and solutions:
| Problem | Solution |
|---|---|
| Loose accessory | Retighten the accessory securely by rotating it until it locks into place. |
| Unable to install a part | Verify the alignment of the interfaces. Ensure the part is oriented correctly and gently rotate to engage the locking mechanism. Avoid excessive force. |
Precaution: Avoid excessive force when installing or removing parts to prevent damage.
8. User Tips
No specific user tips were available from reviews or Q&A for these replacement parts.
9. Warranty and Support
For any questions regarding the replacement parts, warranty information, or further assistance, please contact the seller directly through the platform where the purchase was made. Keep your order details handy for quicker service.
