1. Product Introduction
The AVATTO Tuya WiFi Thermostat Socket is a smart plug-in device designed to control various heating and cooling appliances. It offers precise temperature management and smart home integration, making it suitable for a wide range of applications.
Key Features:
- Supports control of both heating and cooling devices.
- Compatible with Smart Life/Tuya App, Amazon Alexa, Google Home, and Alice for smart control.
- Features a clear OLED screen for easy monitoring.
- Equipped with 4 mechanical buttons for user-friendly operation.
- Offers multiple modes: Cooling, Heating, Socket, Cycle Timer, and Programmable modes.
- Includes temperature calibration and minimum temperature design functions for accuracy.
- Provides High/Low Temperature Alarm to prevent damage.
- Plug and Play design for easy installation without drilling or wiring.
- Designed with safety doors in the socket holes to prevent electric shock.
- Supports devices up to 16A (3840W).
2. Safety Information
- To reduce the risk of electric shock, use this device only indoors.
- Operate the device within the rated power specified in the technical specifications.
- Ensure the device is fully plugged in and kept out of reach of children.
- Risk of electric shock. Do not plug into another relocatable power strip or an extension cord.
- Do not cover the device when operating to prevent overheating.
- No voltage is present only when the plug of the device is disconnected from the mains socket.
3. Product Overview & Standard Accessories
The thermostat socket features an OLED screen, control buttons, an output socket, and a power plug. It comes with external temperature sensors for accurate readings.
Standard Accessories:
- Product (Thermostat Socket) ×1
- Temperature Sensor (5cm) ×1
- Temperature Sensor (300cm) ×1
- User Manual ×1
4. Setup and Installation
Physical Installation:
Simply insert the thermostat socket directly into a standard mains socket. No drilling or complex wiring is required.
APP Installation and Pairing:
To unlock the full smart features of your thermostat socket, you need to install the Smart Life or AVATTO app and pair the device.
- Download the App: Scan the QR code provided in the physical manual or search for "Smart Life" or "AVATTO" in the App Store (iOS) or Google Play Store (Android) to download the application.
- Register/Log In: Open the app. If you are a new user, tap "Register" and follow the prompts to create an account. If you already have an account, simply log in.
- Prepare for Pairing:
- Ensure that both 2.4GHz Wi-Fi and Bluetooth are enabled on your smartphone. (Note: Only 2.4GHz Wi-Fi is supported; 5GHz networks are not compatible).
- Put the Thermostat Outlet into Pairing Mode:
- From the main interface of the thermostat, press the "Mode" button to enter the mode switching interface.
- Use the "+" button to navigate to "Setting".
- Press the "Mode" button again to open the network settings.
- Select "Start setup" and confirm with "YES" to begin the network configuration. The device display will show "Configuring".
- Add Device in App:
- On the app's "Home" interface, tap the "+" icon in the upper right corner.
- Select "Add Device" from the pop-up menu.
- The app should discover the "Smart Plug-in Thermostat". Tap on it to add.
- Select your 2.4GHz Wi-Fi network and enter the password.
- Tap "Next" and wait for the connection to succeed.
- Completion: Once the device is successfully added, tap "Done". You now have full control over your thermostat-controlled outlet via the app.
5. Operating Instructions
Button Functions:
- Plus (+) button: Increases the displayed value or navigates forward in menus.
- Minus (-) button: Decreases the displayed value or navigates backward in menus.
- MODE button:
- Short press: Enters the mode switching interface.
- Press and hold for 3 seconds: Turns the device ON/OFF.
- BACK button:
- Short press: Returns to the previous interface.
- Press and hold for 3 seconds: Deactivates the child lock.
LED Indicators:
- Wi-Fi LED:
- Flashing: Device is connecting to the network.
- Lights up: Network connection is successful.
- Goes out: Device is offline.
- OUTPUT LED:
- Lights up: The output socket is active (powering a connected device).
- Goes out: The output socket is inactive.
- BACK LED:
- Lights up: Indicates that you can return to the previous interface.
- Goes out: Indicates that you cannot return to the previous interface.
Menu Structure and Mode Selection:
From the main interface, short press the Mode button to enter the mode switching interface. Use the Plus (+) or Minus (-) buttons to toggle between available modes, then press the Mode button to confirm your selection.
Available Modes:
- Heating Mode: Controls a connected heating device. Use the Plus/Minus buttons to adjust the target temperature.
- Cooling Mode: Controls a connected cooling device. Use the Plus/Minus buttons to adjust the target temperature.
- Socket Mode: Allows manual toggling of the output status (ON/OFF) and setting a delay time.
- Cycle Timer Mode: The socket cycles between ON and OFF states at regular, user-defined intervals. Set the ON time duration first, then the OFF time duration using the Plus/Minus buttons and confirming with the Mode button.
- Programming Mode (Prog. Heating/Prog. Cooling): Allows viewing of weekly programming settings directly on the device. Specific programming schedules (e.g., different temperatures for different times of day/week) can only be set and managed via the Smart Life/AVATTO app.
Setting Menu:
From the mode switching interface, navigate to "Setting" and press the Mode button to access various device settings:
- Screen: Adjust screen brightness (High/Middle/Low) and screen timeout (15s/30s/60s/120s).
- Child Lock: Enable or disable child lock for physical buttons.
- Network: Manage network settings and initiate pairing mode.
- Advanced: Access advanced temperature control parameters.
- About: View device information.
Advanced Temperature Settings:
- Temperature Unit: Switch between Celsius (°C) and Fahrenheit (°F).
- Temperature Calibration: Adjust the displayed temperature to match an external reference, if needed. Range: -15~15°C (-15~15°F).
- Temperature Difference (Hysteresis): Sets the temperature differential required for switching the device on and off. For example, if set to 1.0°C and the target is 20.0°C in heating mode, the device will heat when the room temperature drops to 19.0°C and stop at 20.0°C. In cooling mode, it will cool at 21.0°C and stop at 20.0°C. Range: 0.1~10°C (0.2~30°F).
- Cooling Delay: Effective only in cooling mode. If the setpoint temperature is reached, the device will wait for a specified period before starting cooling to protect the compressor. This prevents rapid cycling of the cooling unit. Range: 1~10 minutes.
- Frost Protection: Enable/Disable a feature to prevent temperatures from dropping below a certain threshold (e.g., 5°C) to protect pipes or plants.
- High Temp. Alert: Set a maximum temperature threshold. If exceeded, an alarm will trigger. Range: -30~110°C (-22~230°F).
- Low Temp. Alert: Set a minimum temperature threshold. If the temperature drops below this, an alarm will trigger. Range: -30~110°C (-22~230°F).
- Factory Reset: Resets all settings to their default values.
6. Technical Specifications
| Parameter | Value |
|---|---|
| Model Number | WT580-EU |
| Voltage | AC100-240V; 50-60Hz |
| Maximum Load | 16A |
| Wi-Fi Standard | 802.11b/g/n (2.4GHz) |
| Setting Temperature Accuracy | ±0.5°C |
| Temperature Measurement Range | -30~110°C / -22~230°F |
| Storage Temperature | -5~50°C / 23~122°F |
| Temperature Sensor Type | NTC, B=3380, R25=10KΩ±1% |
| Temperature Sensor Length | 5cm, 300cm |
| Protection Level | IP20 |
| Shell Material | Anti-Flammable PC+ABS |
| Dimensions (H x W x D) | 78mm x 57mm x 37.5mm |
7. Maintenance
To ensure optimal performance and longevity of your AVATTO Tuya WiFi Thermostat Socket, follow these simple maintenance guidelines:
- Cleaning: Wipe the device with a dry, soft cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
- Storage: If storing the device for an extended period, ensure it is unplugged and kept in a cool, dry place away from direct sunlight and extreme temperatures.
- Sensor Care: Handle the temperature sensors carefully. Avoid bending or kinking the sensor cables excessively. Ensure the sensor tip is clean and free from debris for accurate readings.
8. Troubleshooting
If you encounter issues with your AVATTO Tuya WiFi Thermostat Socket, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not pairing with app | Incorrect Wi-Fi band, Bluetooth off, device not in pairing mode, incorrect Wi-Fi password. | Ensure your phone's Wi-Fi is 2.4GHz and Bluetooth is on. Put the thermostat into pairing mode as described in Section 4. Double-check your Wi-Fi password. |
| Inaccurate temperature readings | Sensor placement, sensor damage, calibration needed. | Ensure the sensor is placed correctly and not exposed to direct heat/cold sources. Check the sensor for visible damage. Use the temperature calibration feature in the settings menu to adjust. |
| Device offline in app | Wi-Fi signal loss, router issues, device unplugged. | Check your Wi-Fi router and signal strength. Ensure the thermostat is plugged in and powered on. Re-pair the device if necessary. |
| Connected appliance not turning ON/OFF | Incorrect mode, appliance not working, thermostat fault. | Verify the thermostat is in the correct mode (Heating/Cooling/Socket). Check if the appliance itself is working. Ensure the thermostat is receiving power. |
| High/Low Temperature Alarm not working | Alarm thresholds not set, alarm disabled. | Check the High/Low Temp. Alert settings in the Advanced Settings menu via the device or app. Ensure the alarm is enabled and thresholds are appropriate. |
9. User Tips
- Optimal Sensor Placement: For the most accurate temperature readings, place the external temperature sensor in the area where you want to maintain the temperature, away from direct drafts, sunlight, or heat sources.
- Leverage Programming Mode: Utilize the weekly programming feature via the Smart Life/AVATTO app to set custom temperature schedules. This can significantly improve comfort and energy efficiency by automatically adjusting temperatures based on your daily routine.
- Check Wi-Fi Band: During initial setup, always confirm your router is broadcasting a 2.4GHz Wi-Fi signal and your phone is connected to it. This is a common point of failure for smart device pairing.
- Child Lock: If you have children, consider enabling the child lock feature to prevent accidental changes to the thermostat settings.
10. Warranty & Support
For technical support, inquiries, or warranty information, please contact our support team:
- E-Mail: support@miuctech.com
- WhatsApp: +86 13677467757
- Website: http://www.miuctech.com
A detailed user manual in PDF format is also available for download. Please refer to the product page or manufacturer's website for the link.
