LEHX Universal Android Car Radio Multimedia Player

Contents

LEHX Universal Android Car Radio Multimedia Player

Instruction Manual

Introduction

Thank you for choosing the LEHX Universal Android Car Radio Multimedia Player. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new device. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

The LEHX multimedia player features a QLED 1280*720 screen, 5G WIFI, Android 15 operating system, 4G 8-core processor, and supports CarPlay and Android Auto. It is designed for universal fit in vehicles such as Toyota, VW, Hyundai, Kia, Honda, LADA, and FIAT.

LEHX Car Radio Multimedia Player with QLED 1280*720 screen, 7/9/10.1 inch universal, Android 15, 4G 8Core, 4GB+64GB, DSP, and cooling fan details.
Figure 1: LEHX Universal Android Car Radio Multimedia Player Overview

Safety Information

It is highly recommended that installation be performed by qualified professionals to prevent damage to the device or your vehicle. Improper installation can lead to malfunction, electrical issues, or fire hazards. Always disconnect the vehicle's battery before starting any electrical work.

  • Ensure all wiring connections are secure and properly insulated.
  • Do not operate the device in a way that distracts you from driving.
  • Keep the device away from water and excessive moisture.
  • Use only approved accessories and replacement parts.

Setup and Installation

Before installing the product, please test the unit to ensure it functions correctly after transit. Do not install the product directly into the car without prior testing.

Rear Interface Description

The following diagram illustrates the power plug and RCA connections for the multimedia player. Ensure all connections are made correctly according to your vehicle's wiring.

Rear interface wiring diagram for LEHX car radio.
Figure 2: Rear Interface Wiring Diagram

Power Plug Connections:

Wire ColorFunction
Yellow (B+)Constant Power Supply (+12V) - Keeps power on for memory function.
Red (ACC)Ignition Switch - Provides switched +12V power.
Black (GND)Ground Wire
OrangeIlluminate Backlight
Pink (Reverse)Reversing Camera Control Line
Brown (KEY2)Steering Wheel Control 2
Orange/Black Striped (KEY1)Steering Wheel Control 1
Blue (ANT)Auto Antenna Power

Important Wiring Notes:

  • The unit turns on normally when both the yellow (B+) and red (ACC) lines receive a 12V positive power simultaneously.
  • The yellow (B+) line maintains power for the machine's memory function.
  • There are 8 speaker cables. Each cable must not be grounded, shared, or touch other lines. Otherwise, there will be no sound output, sound distortion, or overheating.

Reversing Camera Installation

The reversing camera is an optional feature. If not installed, do not connect the REVERSE/BACK cable. Leave it unconnected to prevent display issues or automatic entry into reverse mode.

Wiring Steps for Reversing Camera:

  1. Connect the yellow cable (1) to the navigation reversing video input socket.
  2. Connect the red cable (2) to the reverse detection line of the navigation adapter (BACK or REVERSE).
  3. Connect cables (3) and (4) together, then connect them to the positive pole of the reverse light power supply.
  4. Connect the black cable (5) to the vehicle's body screw (ground) or the negative pole of the reverse light power supply.

Detailed wiring diagram for reversing camera installation.
Figure 3: Reversing Camera Wiring Diagram

CANBUS Connection

For vehicles with CANBUS, connect the CANBUS box as shown below. Ensure proper connection to avoid issues like the radio failing to shut down.

CANBUS connection diagram for high-end and low-end model cars.
Figure 4: CANBUS Connection for High-End and Low-End Models

  • For High-End Model Car: Disconnect the existing radio connection (1) and connect the CANBUS box (2).
  • For Low-End Model Car: Connect the CANBUS box (1) and then disconnect the existing radio connection (2).

Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

Professional Installation Recommendation

It is highly recommended that installation be performed by professionals. We are not responsible for any damage that may occur to the car dashboard during device installation. Professional installation ensures proper functioning and avoids potential damage.

Operation

Learning Steering Wheel Controls

To configure steering wheel controls:

  1. Press and hold a button on your original car's steering wheel.
  2. Find the corresponding button icon on the multimedia player's screen.
  3. Click the icon to change its color. Successful learning is indicated by the color change.

Steering wheel control learning interface.
Figure 5: Steering Wheel Control Learning Interface

CarPlay System (Some models support)

Wired Connection: Connect your iPhone using a USB data cable. The CarPlay interface will launch automatically.

Wireless Connection:

  1. Enable Bluetooth and Wi-Fi on your mobile phone.
  2. Connect to the multimedia player's Bluetooth.
  3. The CarPlay interface will launch automatically. The signal is transmitted via Wi-Fi, so CarPlay will function even if Bluetooth is turned off. CarPlay will disconnect if Wi-Fi is turned off.

Android Auto (Some models support)

This feature may require local availability of Google Play services.

Wired Connection: Connect your Android phone (Android 6.0 or higher) using a valid USB data cable. The Android Auto interface will launch automatically.

Wireless Connection:

  1. Enable Bluetooth and Wi-Fi on your mobile phone.
  2. Connect to the multimedia player's Bluetooth.
  3. The Android Auto interface will launch automatically. The signal is transmitted via Wi-Fi, so Android Auto will function even if Bluetooth is turned off. Android Auto will disconnect if Wi-Fi is turned off.

CarPlay and Android Auto interfaces on car radio and phone.
Figure 6: CarPlay and Android Auto Integration

Built-in WiFi Function

The device features built-in WiFi, allowing you to download software, stream entertainment, and access online content for a safe and enjoyable driving experience. The Android open system allows you to download and install various apps.

Built-in WiFi function for app downloads and entertainment.
Figure 7: Built-in WiFi Functionality

Supporting Party Control

The unit supports original vehicle controls and can be used in conjunction with buttons, touch screen, and original steering wheel buttons. This includes functions like phone calls, menu return, song selection, volume adjustment, and pause/start playback.

Supporting party control for original vehicle buttons.
Figure 8: Supporting Party Control

APP Picture-in-Picture Split Screen Function

Enjoy a new visual experience with the APP picture-in-picture split screen function, allowing for adjustable screen sizes to view multiple applications simultaneously.

APP picture-in-picture split screen function.
Figure 9: Picture-in-Picture Split Screen

Multiple UI Options

Customize your device's appearance with new UI interface upgrades, offering interchangeable wallpaper colors and various themes to suit your preference.

Multiple UI options and customizable wallpapers.
Figure 10: Multiple UI Options

Rainbow Indicator Light

Choose your preferred button light color from 7 options to match your mood. The device also supports a flashing function to liven up your car's interior.

Rainbow indicator light with various color options.
Figure 11: Rainbow Indicator Light Options

GPS + BeiDou Positioning Navigation System

Benefit from advanced, accurate positioning with a stronger signal. The GPS + BeiDou dual positioning system ensures worry-free travel with no wasted road. It supports GPS+BeiDou/Glonass/Galileo/Japan quasi-Zenith for quicker star searches and accurate signal strength detection.

GPS + BeiDou positioning navigation system interface.
Figure 12: GPS Navigation System

Video Out to Headrest Monitors

The device supports video output to headrest monitors (Plug-n-Play with 2 RCA Outputs). Note that some WIFI/4G versions may require an additional USB converter for this function. This allows passengers to enjoy a visual feast during travel.

Video out to headrest monitors with 178° viewing angle.
Figure 13: Video Out to Headrest Monitors

Maintenance

Strong Heat Dissipation

The multimedia player is equipped with a newly upgraded heat dissipation system, featuring dual heat dissipation fans. This system includes CPU temperature detection and can be set to manual or automatic switch, preventing abnormal operation caused by high temperatures during summer or long-term use, such as restarts or touch exceptions.

Strong heat dissipation system with dual cooling fans.
Figure 14: Strong Heat Dissipation System

Cooling Fan Correlation

The cooling fan effectively manages and resolves abnormal operations caused by high temperatures, such as restarts, touch exceptions, or function exceptions, ensuring stable performance even during prolonged use.

Comparison of uncooled vs. cooled fan performance.
Figure 15: Cooling Fan Performance Comparison

Common Problems and Simple Troubleshooting

1) Cannot boot normally

  1. Wiring Issue: If only 2 of the 3 main power lines (Yellow, Red, Black) are connected, the unit will not start. Ensure Yellow is connected to positive, Red to key control, and Black to negative.
  2. Incorrect Wiring: Original car wiring colors may not be standard. Connecting based on color alone can cause damage.
  3. Incompatible Plug: The original car plug cannot be directly used with the new unit.
  4. Fuse/Power Issue: If all 3 wires are connected correctly but it doesn't boot, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn on the key, and press the power button.
  5. Repeated Fuse Burning: If the fuse burns repeatedly, it indicates a short circuit in the unit's protection circuit. Seek professional guidance for repair.

2) Automatic shut-down

  1. Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, automatic shutdown will occur. Correct the wiring.
  2. Unstable Voltage: Find a stable 12V-5A power supply and re-test. If it still shuts down automatically, the power supply is faulty.

3) There is noise

  1. Speaker Power: If the original speaker power is too low, noise will occur at high volumes. Reduce volume or replace speakers.
  2. Grounded Speaker Cable: If a speaker cable is grounded, connect the iron speaker cable directly to the unit's speaker cable.

4) Remote control cannot be used

Test Method: Use your phone camera to check the remote control's light. If it doesn't light up, replace the battery. If it lights up, the remote control is functional.

5) Settings cannot be saved (no memory)

  1. Incorrect Wiring: The yellow and red lines are connected together (yellow to positive, red to key control).
  2. Reversed Wiring: Yellow and red wires are reversed.

6) Bluetooth not working

Turn on the machine, search for its Bluetooth name on your phone, and connect. After connecting, you can make calls or play music via Bluetooth.

7) The product emits smoke

Replace the FUSE. If the problem persists, the internal circuit is burned. Professional service is required.

8) The sound cannot be adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. If the volume knob is broken, it can be replaced.

9) Reversing camera does not display

  1. Wrong or Missing Wiring: Refer to the reversing camera installation method in the Setup section.
  2. Broken Camera: If the lamp connected to the camera doesn't light up, the camera is broken and needs replacement.

10) USB devices cannot be played

Format the USB flash disk to FAT32. Re-download songs and try again. If it still doesn't work, replace the USB flash drive.

11) FM does not receive the radio station

  1. Antenna Connection: Ensure the antenna plug is fully inserted and not disconnected.
  2. Station Search: Use the 'AS' button for automatic search or manually search using the 'before' or 'after' buttons.
  3. If issues persist, unplug the antenna plug and insert a screwdriver or metal strip instead of the antenna to test.

12) No sound right after installation

This usually indicates a wiring error or a short-circuited original car speaker wire. Check for short circuits and reconnect. Verify the number of speaker cables matches your original car's setup.

13) No sound after a while

Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple wires of the tail line. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

Specifications

FeatureSpecification
Brand NameLEHX
Operating SystemAndroid
RAM8G (various options available)
ROM256G (various options available)
ResolutionQLED 1280*720
Display Size7", 9", 10"
DinDouble Din
Out Power50x4
Voltage12 V
Item Weight1kg
Item Size230*130*220 mm
Max External Memory128G
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Support 4G Network, Built-in GPS, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (including English, Chinese, Russian, Spanish, etc.)
CertificationCE
MaterialABS+
Built-in ScreenYes
Is Touch ScreenYes
TF/Micro SD Slot0
Subwoofer OutputSupport
AV-OUTWiFi version support
RCA cable7 channels including subwoofer cable
Rear view camera inputSupport (Free Gift)
Input Interface2*USB RCA Bluetooth
WIFIBuilt-in
Steering wheel controlSupport
MicrophoneBuilt-in
External microphoneOptional
GPS Navigation mapBuilt-in offline map free update (support Navitel/Igo)
Bluetooth phone bookSupport
Bluetooth musicSupport

User Tips

  • Initial Satellite Lock: After the first successful search for satellite signals, the time and date will update automatically.
  • Memory Usage: Be aware that the operating system and pre-installed applications will occupy a portion of the device's memory. For example, the map of Russia requires about 2.8GB, and the map of Europe requires about 6.8GB.
  • Boot Logo Customization: You can change the boot logo via Settings > Car Information > General > Boot Logo. Use password '8888' for L6/L6Plus models or '3368' for L6Pro models, then select your desired logo.
  • Customer Service for Compatibility: Before ordering, it's advisable to contact customer service to confirm frame or cable compatibility with your specific vehicle model.

Warranty and Support

The LEHX Universal Android Car Radio Multimedia Player comes with a 1-year warranty. LEHX is committed to providing free technical service support for its products.

For additional information, you can refer to the official user manual available in PDF format. This document contains detailed instructions and diagrams that may not be fully covered in this guide.

Reference: User manual (PDF) available at https://manuals.plus/m/9e26e20d9c0dc7d1dd690f7aceea36c17322052ab0c657db463a4334350b59a4

If you encounter any questions or require technical assistance, please contact LEHX customer service. You can find contact information, including WhatsApp and social media links, on the last page of the physical manual or through the seller's store page.

LEHX brand commitment: Original Products, 15-Days Return/Refund, 180-Days Warranty, Free Technical Service Support, Local Fast Delivery.
Figure 16: LEHX Brand Commitment

LEHX customer service contact information via QR codes for WhatsApp, YouTube, TikTok, and Instagram.
Figure 17: Customer Service Contact Information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.