Introduction
The BlitzWolf BW-BTS10 OWS Bluetooth Earbuds are designed for active lifestyles, featuring bone conduction technology for open-ear listening, ensuring awareness of your surroundings. With IPX8 waterproofing, low latency game mode, and ENC call noise reduction, these earbuds provide a versatile and comfortable audio experience for various activities, from intense workouts to daily commutes.
Image: Overview of key features including Bone Conduction Technology, Bluetooth V5.4, IPX8 Waterproof, and ENC Call Noise Reduction.
Package Contents
Please check the package for the following items:
- 1x BlitzWolf BW-BTS10 OWS Earbuds
- 1x Charging Cable
- 1x User Manual
Product Overview
The BW-BTS10 earbuds feature an open-ear design with comfortable silicone ear hooks and a balanced rear hanging design made from durable titanium alloy for a secure fit during various activities.
Image: The secure fit of the earbuds with ear hanging and high-elastic titanium wire, designed for stability during active use.
The earbuds utilize a 15mm bone conduction unit for high-fidelity audio with reduced sound leakage, and are equipped with HD microphones for clear calls with Environmental Noise Cancellation (ENC).
Image: Internal view of the earbud highlighting the 15mm bone conduction unit for high-fidelity sound.
Setup Guide
1. Initial Charging
Before first use, fully charge your BW-BTS10 earbuds and their charging case.
- Place the earbuds into the charging case.
- Connect the charging cable to the case and a USB power source.
- The charging time for the case and earbuds is approximately 2 hours.
Image: Battery performance details, including 3*5H playback, 2H charging, and 10 days standby time.
2. Bluetooth Pairing
- Ensure the earbuds are charged and placed in the charging case.
- Open the charging case. The earbuds will automatically enter pairing mode (indicated by LED lights).
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "BW-BTS10" in the list of available Bluetooth devices.
- Select "BW-BTS10" to connect. Once connected, a voice prompt will confirm successful pairing.
- The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
Image: The superior Bluetooth V5.4 chip ensures stable and low-latency connections.
Operating Instructions
Power On/Off
- Power On: Open the charging case, and the earbuds will power on automatically.
- Power Off: Place the earbuds back into the charging case and close the lid. They will power off and begin charging.
Music Playback
- Play/Pause: Tap the control button on either earbud once.
- Next Track: Double-tap the right earbud's control button.
- Previous Track: Double-tap the left earbud's control button.
Call Management
- Answer/End Call: Tap the control button on either earbud once.
- Reject Call: Press and hold the control button on either earbud for 2 seconds.
- Voice Assistant: Triple-tap the control button on either earbud to activate your device's voice assistant.
Volume Control
- Increase Volume: Press and hold the control button on the right earbud.
- Decrease Volume: Press and hold the control button on the left earbud.
Game Mode
The BW-BTS10 features a low-latency game mode for an enhanced gaming experience.
- Activate/Deactivate Game Mode: Consult the specific instructions in your included user manual for the exact button combination to switch between music and game modes.
Maintenance and Care
Cleaning
- Wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
Waterproofing (IPX8)
The BW-BTS10 earbuds have an IPX8 waterproof rating, meaning they can withstand immersion in water under certain conditions. This makes them suitable for use in rain, during sweaty workouts, and even swimming.
Image: A swimmer using the earbuds, highlighting their IPX8 professional waterproof capability.
Important Note: While the earphones are water-resistant, do not use them underwater for more than half an hour to prevent potential damage.
Storage
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Avoid storing in extreme temperatures or direct sunlight.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing |
|
| No sound from earbuds |
|
| Earbuds not charging |
|
| Poor call quality |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | BlitzWolf |
| Model | BW-BTS10 |
| Color | Black |
| Wearing Type | Open-ear |
| Net Weight (g) | 62g |
| Dimensions | 86mm*66.6mm*21mm |
| Driver Dimensions | Φ15*10*4.2mm H |
| Microphone | Yes (HD Microphones with ENC) |
| Volume Control | Yes |
| Bluetooth Version | V5.4 |
| Audio Decoding | AAC, SBC |
| Supported Profiles | HFP/A2DP/AVRCP |
| Transmission Distance | 10m (33 feet) |
| Frequency Response | 20-20k Hz |
| Earbud Battery Capacity | 65mAh*2 |
| Charging Box Battery Capacity | 300mAh |
| Charging Time | 2h |
| Music Time | 6-10h |
| Waterproof Rating | IPX8 |
User Tips
- Awareness: The open-ear bone conduction design allows you to hear your surroundings, which is great for outdoor activities like cycling or running where situational awareness is crucial.
- Comfort: Experiment with the ear hook placement to find the most comfortable and secure fit for extended wear.
- Game Mode: For competitive gaming, remember to activate the low-latency game mode for a more synchronized audio experience.
- Water Exposure: Always ensure the charging port is dry before charging after water exposure.
Image: Benefits of true bone conduction, emphasizing safety, health, cleanliness, and communication.
Warranty and Support
BlitzWolf products are manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the official BlitzWolf website or contact your retailer. Keep your purchase receipt as proof of purchase.
For technical assistance or inquiries, please contact BlitzWolf customer service.
