WityPower ACH-FE07/ACH-FE22/ACH-FE22-A

Contents

WityPower Type2 EV Charging Station User Manual

Models: ACH-FE07 (7KW 1-Phase), ACH-FE22 (22KW 3-Phase), ACH-FE22-A (22KW 3-Phase)

1. Introduction

Thank you for choosing the WityPower Type2 EV Charging Station. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your EV charger. Please read this manual thoroughly before installation and use, and keep it for future reference.

WityPower Type2 EV Charging Station with key features
WityPower Type2 EV Charging Station overview, highlighting 7KW 1-Phase, 22KW 3-Phase, 6A-32A current adjustment, Smart Life app, WiFi, RFID, TUV SUD certification, IP66 IK08 protection, and 2-Year Warranty.

2. Specifications

AttributeValue
Brand NameWityPower
Product ModelACH-FE07/ACH-FE22/ACH-FE22-A
Power (W)7KW/11KW/22KW
Charger TypeAC Type2
Voltage230V/400V
Current6A/8A/10A/13A/16A/24A/32A
Cable Length5M
IP RatingIP66
Operating Temperature-30℃~+50℃
Wireless SupportWifi
TouchscreenNo
Length33cm
Width19cm
Height10.5cm
Weight4kg/5.2kg/5.55kg
CertificationTUV/CE/UKCA/CB

3. Setup

The WityPower EV Charging Station is designed for wall-mounted installation. Proper installation is crucial for safety and optimal performance. It is recommended that installation be performed by a qualified electrician.

3.1 Package Contents

Before installation, ensure all components are present:

  • EV Charging Station unit
  • Charging Cable (5M)
  • Mounting hardware (screws, wall plugs)
  • RFID cards
  • User Manual (this document and the detailed PDF)
WityPower EV Charger package contents
Image showing the EV charger unit, charging cable, mounting accessories, RFID cards, and user manual.

3.2 Electrical Connection

The charger supports both 1-Phase (7KW) and 3-Phase (11KW/22KW) configurations. Ensure your electrical supply matches the charger's requirements and local electrical codes.

WityPower 7KW 1-Phase EV Charger with wiring
A WityPower 7KW 1-Phase EV Charger with its internal wiring exposed, showing the power input cables.

For detailed installation instructions, including wiring diagrams and mounting procedures, please refer to the comprehensive user manual PDF: WityPower EV Charging Station User Manual (PDF).

4. Operating Instructions

4.1 Basic Charging Process

  1. Connect the Type2 charging cable to your electric vehicle's charging port.
  2. The charger can initiate charging via 'Plug & Charge' (if enabled) or by swiping an authorized RFID card.
  3. Charging will begin automatically.
Video demonstrating the EV charging process, including plugging in the cable, using an RFID card to activate charging, and monitoring via the mobile app.

4.2 APP Control and Smart Features

The WityPower EV Charging Station can be controlled and monitored via a dedicated mobile application (works with Smart Life). This provides advanced features for managing your charging sessions.

  • Schedules: Set specific times for charging to take advantage of off-peak electricity rates. Push notifications can remind you 15 minutes before charging starts.
  • Current Adjustment: Adjust the charging current (6A/8A/10A/13A/16A/24A/32A) to suit your needs or optimize battery life.
  • Charging Records: View detailed records of your charging sessions, including duration and energy consumed.
  • OTA Upgrade: Receive constant software improvements with automatic over-the-air (OTA) remote firmware updates.
WityPower EV Charger App features
Screenshot of the mobile app showing features like charging schedules, charging records, current adjustment, and OTA upgrade options.
Scheduled Charging Time for cost savings
Diagram illustrating how to use scheduled charging to save costs by charging during off-peak hours.
Flexible Power with Current Adjustment
Illustration of flexible power adjustment, allowing users to lower current at night for battery longevity or increase for quick top-ups.

4.3 LCD Screen Display

The high-resolution LCD screen provides real-time information at a glance:

  • Real-time Temperature
  • Real-time Voltage
  • Real-time Current
  • Charging Status
  • WiFi Status
  • Software Versions
WityPower EV Charger LCD screen details
Detailed view of the EV charger's LCD screen, showing real-time charging data and status indicators.

4.4 App Control Without WiFi

If WiFi is unavailable, you can still control the charger via the app using a hotspot connection and Bluetooth within 10 meters. This requires your phone's SIM card to have a signal.

App control via Bluetooth without WiFi
Illustration showing how the mobile app can connect to the charger via Bluetooth within 10 meters, even without a direct WiFi connection.

5. Maintenance

5.1 Durability and Environmental Resistance

The WityPower EV Charging Station is built to withstand various environmental conditions:

  • Waterproof & Dustproof: IP66 rated, ensuring protection against strong jets of water and dust ingress.
  • Cold Resistant: Operates reliably in temperatures as low as -30°C.
  • Heat Resistant: Functions effectively in temperatures up to +55°C.
WityPower EV Charger durability features
Visual representation of the charger's IP66 waterproof and dustproof ratings, along with its cold (-30°C) and heat (55°C) resistance.

5.2 Smart Temperature Control

The charger features a smart dual temperature control system to prevent overheating. If the internal temperature reaches 85°C, charging will temporarily stop. It will automatically resume once the temperature drops to 65°C, ensuring safer charging and prolonging the device's lifespan.

Smart dual temperature control system graph
Graph illustrating the smart dual temperature control system, showing charging stopping at 85°C and resuming at 65°C to prevent overheating.

5.3 Cleaning

Regularly clean the exterior of the charging station with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port and cable are free from dirt and debris.

6. Troubleshooting

6.1 Safety Protections

The WityPower EV Charging Station is equipped with 10 intelligent safety protections:

  • Full Charging Protection
  • Leakage Protection (Type B Leakage Protection AC30mA+DC6mA)
  • Under Voltage Protection
  • Over Voltage Protection
  • Lightning Protection
  • Short-circuit Protection
  • Earth Protection
  • Over Temperature Protection
  • Over Current Protection
  • IK08 Impact Protection
WityPower EV Charger safety features
Diagram listing the 10 intelligent safety protections integrated into the EV charging station.

6.2 LED Indicator Status

The LED indicator on the charger provides visual feedback on its status:

  • Flash blue: Standby mode - not connected to the network.
  • Colorful Lights: Standby mode - connected to the network.
  • Green water lighting effect: Charging mode - charging in progress.
  • Green light bright: Charging mode - charging completed.
  • Flashing red: Failure.
WityPower EV Charger LED indicator states
Visual guide to the LED indicator lights and their corresponding operational statuses, including failure states.

6.3 Common Issues and Solutions

  • Charger not working / Flashing red LED:
    - Check all electrical connections to ensure they are secure.
    - Verify the power supply to the charger.
    - If the issue persists, consult the detailed PDF manual for specific error codes or contact customer support.
  • App connectivity issues:
    - Ensure your WiFi network is active and the charger is within range.
    - If using Bluetooth, ensure your phone is within 10 meters of the charger and Bluetooth is enabled.
    - Restart the app and the charger.
  • Charging stops unexpectedly:
    - Check the LCD screen or app for any error messages.
    - The smart temperature control system may have paused charging due to high temperature (see Section 5.2). Charging will resume automatically when safe.

7. User Tips

  • Current Adjustment: The charger supports current adjustment from 6A up to 32A. You can set it to 13A or any other supported level via the app to match your vehicle's needs or available power supply.
  • WiFi Connectivity: Yes, the charger works with WiFi for smart app control. If WiFi is not available, you can still use the app via a hotspot and Bluetooth connection within 10 meters.
  • App Features: Before purchase, review the app's features to ensure they meet your specific requirements for scheduling, monitoring, and control.
  • Professional Installation: For optimal performance and safety, always ensure the charging station is installed by a qualified professional according to the provided manual and local electrical codes.
  • Troubleshooting: If you encounter issues, first check the LED indicator and app for status. If problems persist after basic troubleshooting, refer to the detailed PDF manual or contact customer support.

8. Warranty and Support

The WityPower EV Charging Station comes with a 2-year warranty. For warranty claims, technical support, or further assistance, please refer to the contact information provided in the detailed user manual PDF or on the WityPower official website.

For detailed warranty terms and conditions, please consult the comprehensive user manual PDF: WityPower EV Charging Station User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.