PHYEE PSA15ANT

Contents

PHYEE CAN Bus Harness Adapter User Manual

Model: PSA15ANT

1. Introduction

This manual provides detailed instructions for the installation and setup of your PHYEE CAN Bus Harness Adapter. This adapter is designed to integrate an aftermarket Android car radio with your vehicle's existing electrical system, enabling features such as steering wheel controls, reversing radar support, and communication with the onboard computer and air conditioning panel.

Please read these instructions carefully before installation to ensure proper functionality and to avoid damage to your vehicle or the product.

2. Compatibility

This CAN Bus Harness Adapter is specifically designed for certain Peugeot and Citroen models. It is crucial to verify your vehicle's original radio connector type and your new Android radio's interface requirements before installation.

2.1 Android Radio Requirements

  • The Android radio must have a 16-Pin connector.
  • The Android radio must have an 8-Pin CAN Bus socket.

Note: The radio must be a 16-Pin connector Android system!

2.2 Vehicle Compatibility

This adapter is suitable for car models where the original radio connector is a Quadlock 40 pin or 56 pin. The model and model year must match the harness adapter.

Reminder: Due to regional differences, the above compatibility is for reference only. You need to confirm whether the car wire harness plug matches our wire harness socket before purchasing!

Compatible Car Models:

  • Peugeot:
    • 208 (2012 - 2020)
    • 2008 (2012 - 2020)
    • 207 207CC (2007-2011)
    • 307 Phase 2
    • 308 (2012 - 2018)
    • 3008 (2013-2019)
    • 408 (2014 - 2019)
    • 4008 (2016 - 2019)
    • 508 (2011-2016)
    • 5008 (2011 - 2019)
    • Tepee 2016
    • Expert (2011-2015)
    • Partner (2010-2016)
  • Citroen:
    • C3 (2006-2017)
    • C4 (2008-2017)
    • C4 Grand Picasso (2009-2017)
    • C5 (2010-2016)
    • Jumpy (2011-2015)
    • Berlingo (2010-2016)

3. Package Contents

The package includes the following components:

  • 1 x Harness adapter
  • 1 x CAN Bus decoder
  • 1 x Fakra antenna adapter
PHYEE CAN Bus Harness Adapter components
Image: Overview of the PHYEE CAN Bus Harness Adapter, CAN Bus decoder, and Fakra antenna adapter.

4. Specifications

FeatureDescription
Model NamePSA15ANT
Item TypeCables, Adapters & Sockets
MaterialCopper
Voltage12 V
Item Weight0.1kg
PCB includedYes
ConnectorsQuadlock 40 Pin, 56 Pin, 16 Pin Plug
Included ComponentsCAN Bus Decoder
Suitable Car Radio TypeAndroid System with 16 Pin Connector

4.1 Product Features (Enabled by CAN Bus Decoder)

  • Basic information retention (ACC 12V, reverse, handbrake, lights)
  • Original car steering wheel buttons and steering angle information
  • Support for onboard computer data
  • Support for reversing radar display
  • Support for original car air conditioning panel display

5. Setup and Installation

The installation process involves connecting the harness adapter and CAN Bus decoder to your Android radio and vehicle's wiring. Ensure all connections are secure before powering on the system.

5.1 Identifying Connectors

Before starting, identify the correct connectors on your vehicle's original radio and your new Android head unit.

Quadlock 40 pin connector on car radio
Image: Example of a Quadlock 40 pin connector on a car radio.
56 pin connector on car radio
Image: Example of a 56 pin connector on a car radio.

5.2 Wiring Diagram for Android Radio Interface

The adapter is designed for Android radios with a 16-pin main connector and an 8-pin CAN Bus connector. Refer to the diagram below for the pinout of the 16-pin connector.

Navigation Unit Interface Requirements for 16-pin Android radio
Image: Navigation Unit Interface Requirements for 16-pin Android radio + 8-pin connector. This diagram shows the pin assignments for RR-, RR+, RL+, RL-, ANT, KEY 2, ILL, Battery+ 12V, FL+, FL-, FR+, FR-, KEY 1, REVERSE, ACC 12V, and GND.
Detailed 8-pin plug wiring diagram
Image: Detailed wiring diagram for the 8-pin plug, illustrating connections for front speakers (White, White/black striped, Gray, Gray/black striped), rear speakers (Green, Green/black striped, Purple, Purple/black striped), Ground Wire (Black), Constant Power Supply +12V (Yellow), Ignition Switch (Red), Illuminate Backlight (Orange), Reversing camera control line (Pink), and Auto Antenna Power (Blue).

5.3 Connection Steps

  1. Connect the harness adapter and the CAN Bus decoder correctly. Ensure all plugs are firmly seated.
  2. Connect the 16-pin plug from the harness to your Android radio's 16-pin socket.
  3. Connect the CAN Bus decoder's 8-pin connector to the corresponding 8-pin CAN Bus socket on your Android radio.
  4. If installing a reversing camera, connect its video input to the 'reversing camera in' RCA connector on the harness.
  5. Connect the Fakra antenna adapter to your vehicle's antenna input and the Android radio's antenna port.
Connections for reversing camera, 16-pin connector, and CAN Bus decoder
Image: Visual guide showing connections for reversing camera input, the 16-pin connector, and the CAN Bus decoder.

5.4 CAN Bus Setting Guide

After physical installation, you need to configure the CAN Bus settings within your Android radio's software.

  1. Enter your Android system's factory settings. (A password may be required, refer to your Android radio's manual for this password).
  2. Navigate to the "CAN Bus Part" section within the factory settings.
  3. Choose the correct CAN Bus decoder brand, followed by your car's brand, model, and year.
CAN Bus Setting Guide
Image: CAN Bus Setting Guide showing the three steps for configuration and a table of decoder labels.

CAN BUS Setting Steps:

No.Decoder LabelSetting Step 1 (CAN Bus Setting)Setting Step 2 (Car Brand)Setting Step 3 (Car Model & Year)
1Raise/睿志诚Raise/RZCPeugeot or CitroënCar Model & Year
2HiworldHiworld/WCPeugeot or CitroënCar Model & Year
3ODOD/OudiPeugeot or CitroënCar Model & Year
4SimpleSoftSimpleSoft/XP/XINPUPeugeot or CitroënCar Model & Year
5LuZhengLuZheng/LZPeugeot or CitroënCar Model & Year

Connect your Android system to the internet to update the CAN Bus APK version if necessary.

5.5 Installation Video Guide

For a visual guide on connecting the harness, please watch the following video:

Video: Demonstration of connecting the PHYEE CAN Bus Harness Adapter components.

6. Operating Instructions

Once the harness adapter and CAN Bus decoder are correctly installed and configured, your Android radio should seamlessly integrate with your vehicle's systems.

  • Steering Wheel Controls (SWC): Your original steering wheel buttons should now control your Android radio's functions (e.g., volume, track skip).
  • Reversing Radar: If your vehicle has a reversing radar, its information should be displayed on your Android radio screen when reversing.
  • Onboard Computer & AC Panel: Relevant data from your vehicle's onboard computer and air conditioning panel may be accessible or displayed on your Android radio, depending on your specific Android system's capabilities.

7. Maintenance

The PHYEE CAN Bus Harness Adapter is designed for durability and requires minimal maintenance. Ensure all connections remain secure and free from moisture or physical damage. Periodically check for any loose wires or connectors, especially after driving on rough terrain.

8. Troubleshooting

If you encounter issues after installation, consider the following:

  • No Functionality / Partial Functionality:
    1. Double-check all physical connections to ensure they are firm and correctly matched according to the diagrams.
    2. Verify that the CAN Bus settings in your Android radio's factory settings are correctly configured for your specific decoder brand, car brand, model, and year.
    3. Ensure your Android radio is compatible with a 16-pin main connector and an 8-pin CAN Bus socket.
  • Steering Wheel Controls Not Working:
    1. Confirm the CAN Bus settings are correct.
    2. Some Android radios may require additional software configuration for steering wheel controls. Refer to your Android radio's manual.
  • Reversing Camera Signal Issues:
    1. Ensure the reversing camera's video input is correctly connected to the 'reversing camera in' RCA connector on the harness.
    2. Check the camera's power supply and signal integrity.
  • Incorrect Product Received or Compatibility Concerns:
    1. If the product does not match the description or your vehicle's requirements, carefully review the compatibility section and your vehicle's original wiring.
    2. It is highly recommended to contact the seller with photos of your original radio's connectors and your new Android radio's sockets if you are unsure about compatibility before purchase or during installation.

9. User Tips

  • For Peugeot 207 (2009 model), this CAN bus adapter has been reported to work well with Atoto A5L car radios, enabling rear camera signals when reversing.
  • Many users have successfully recovered steering wheel control functionality on Peugeot 207 (2011) and Peugeot 208 (2008) models after installing this CAN bus.
  • When installing with Carplay systems in Peugeot vehicles, following the manual's steps carefully can quickly enable steering wheel controls.

10. Warranty and Support

For any issues, questions, or technical support regarding your PHYEE CAN Bus Harness Adapter, please contact the PHYEE Official Store directly through the platform where you made your purchase. Provide your order details and a clear description of the problem for efficient assistance.

Please refer to the seller's policies for specific warranty information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.