DOOYA DC115A

Contents

DOOYA DC115A Mini Single Channel RF433 Wireless Emitter

Instruction Manual

Introduction

The DOOYA DC115A is a mini single-channel RF433 wireless emitter designed for controlling motorized rolling shutter doors and garage systems. This manual provides essential information for the safe and efficient use of your wireless emitter, including setup, operation, maintenance, and troubleshooting.

Front view of the DOOYA DC115A remote control with DOOYA Tubular Motor logo

Figure 1: DOOYA DC115A Wireless Emitter

Product Features

  • Single channel control for one motor or group of motors.
  • RF433 wireless communication for reliable operation.
  • Compact and portable design with keychain attachment.
  • Intuitive button layout for Up, Down, Stop, and Lock/Unlock functions.
  • CE certified for safety and quality.

Setup

1. Battery Installation

The DOOYA DC115A wireless emitter requires a battery for operation, which is not included due to shipping regulations. Please purchase a suitable battery (typically a 12V A23 type) from your local market.

  1. Locate the battery compartment on the back of the remote control.
  2. Carefully open the remote casing to access the battery slot.
  3. Insert the new 12V A23 battery, ensuring correct polarity (+/-).
  4. Close the remote casing securely.
Internal view of the remote control showing battery compartment and circuit board

Figure 2: Battery Compartment (Battery not included)

2. Pairing with Receiver/Motor System

The DC115A emitter must be paired with a compatible DOOYA receiver or motorized system to function. The specific pairing procedure may vary depending on your receiver or motor model. Please refer to the instruction manual provided with your DOOYA receiver or motor for detailed pairing instructions. Generally, this involves:

  • Placing the receiver into pairing mode (often by pressing a 'Learn' or 'Program' button).
  • Pressing a specific button on the DC115A emitter to transmit the pairing signal.
  • Confirming successful pairing (e.g., LED indicator on the receiver).
Wiring diagram for a motorized rolling shutter door system with DC115A emitter

Figure 3: Typical System Integration (DC115A with Receiver and Motor)

This diagram illustrates the components of a motorized rolling shutter system: Manual Tubular Motor (DM45M-50/12), Drive Adapter (DL210), Driving Tube, Wall Bracket (DZ193), Idler (DW12), Metal Roller Sheet, Guiding Track, Motor Bracket (DZ198), Receiver (DC136), Hand Crank Tie-in (DS15), Hand Crank (DS38), Crown (DH90), and the DC115A Mini single-channel emitter.

Operating Instructions

Once the DC115A emitter is paired with your system, you can control your motorized rolling shutter or garage door using the following buttons:

  • Up Arrow Button: Press to raise the shutter/door.
  • Down Arrow Button: Press to lower the shutter/door.
  • Square Button (Stop): Press to stop the shutter/door at its current position.
  • Lock/Unlock Button: This button's function may vary depending on your receiver/motor system. It typically serves as a lock/unlock feature or an additional control option. Refer to your receiver's manual for specific functionality.
Front view of the DOOYA DC115A remote control showing buttons

Figure 4: DC115A Button Layout

Maintenance

Battery Replacement

When the remote's range decreases or it stops responding, it's likely time to replace the battery. Follow the battery installation steps outlined in the 'Setup' section.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the device.

Storage

Store the remote in a dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

  • Remote not responding:
    • Check if the battery is installed correctly and has sufficient charge. Replace if necessary.
    • Ensure the remote is within the operating range of the receiver.
    • Verify that the remote is properly paired with the receiver/motor system. Re-pair if needed, following your receiver's instructions.
    • Check for any obstructions between the remote and the receiver.
  • Limited operating range:
    • Replace the battery with a fresh one.
    • Ensure there are no strong sources of interference (e.g., other RF devices, large metal objects) near the remote or receiver.

Specifications

Feature Specification
Model Number DOOYA DC115A
Control Type Single Channel RF433 Wireless Emitter
System Voltage 110-240V (for compatible motor/receiver system)
Emitter Wattage 0.03W
Battery Type 12V A23 (Not Included)
Origin Mainland China
Certification CE

User Tips

  • Always keep a spare battery on hand to avoid interruptions in control.
  • For optimal range, ensure a clear line of sight between the remote and the receiver, if possible.
  • If controlling multiple systems, consider labeling your remotes to avoid confusion.

Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 DOOYA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.