Intelamp Solar Lights Outdoor with 3 Modes Motion Sensor

Introduction

Thank you for choosing Intelamp Solar Lights. Our products are designed for high quality and long lifespan, specializing in solar lighting solutions for over 20 years. This manual provides essential information for the safe and efficient use of your new solar light system. Please read it thoroughly before installation and operation.

Package Contents

Please check the package to ensure all items are present:

• Main Solar Light Unit
• Solar Panel
• Remote Control
• Mounting Hardware (screws, anchors)
• 5-meter (16.4 ft) Waterproof Connection Cable
• Instruction Manual (this document)

Image Description: An overview of the Intelamp Solar Light system, showing the main light fixture, a separate solar panel, a remote control for operation, and a small auxiliary motion sensor.

Setup and Installation

The Intelamp Solar Light offers flexible installation options, including pole mount and wall mount. Ensure the solar panel is placed in direct sunlight for optimal charging.

Choosing an Installation Location:

• Solar Panel: Must be installed in a location that receives at least 5 hours of direct sunlight daily. Avoid shaded areas. The 5-meter connection cable allows for flexible placement of the solar panel away from the light unit.
• Light Unit: For optimal illumination, install the light unit at a height of 10-12 feet (approximately 3-3.6 meters). This height provides a wide 180-degree, 3-sided illumination covering up to 3000 square feet.

Installation Steps:

1. Mount the Solar Panel: Use the provided mounting hardware to securely attach the solar panel to your chosen location (wall or pole). Ensure it is angled to receive maximum sunlight.
2. Mount the Light Unit: Attach the main light unit to your desired location using the appropriate mounting hardware.
3. Connect the Solar Panel to the Light Unit: Connect the 5-meter waterproof cable from the solar panel to the light unit. Ensure the connection is secure and watertight.
4. Initial Charge: Allow the solar panel to charge the battery for at least one full day (5 hours of direct sunlight) before first use to ensure optimal performance.

Image Description: Visual guide demonstrating the two primary installation methods: mounting on a pole or directly onto a wall.

Image Description: Illustrates the flexibility of installation, enabling the light to be positioned in desired areas while the solar panel is placed in optimal direct sunlight, connected by a 16.4ft (5-meter) waterproof cord.

Operating Instructions

Your Intelamp Solar Light is equipped with multiple operating modes and intelligent features for convenience and energy efficiency.

Automatic Operation:

The light automatically charges during the day and turns on at night. It features dual motion sensors for enhanced sensitivity.

Remote Control Functions:

Use the provided remote control to select different lighting modes and adjust settings.

• Mode Selection: Choose from 3 distinct lighting modes (details on specific modes are typically found on the remote or product packaging, but generally include dim-to-bright motion, full-bright motion, or constant dim light).
• Brightness Adjustment: Adjust the light intensity as needed.
• Timer Settings: Set the duration for the light to stay on after activation (if available).

Intelligent Mutual Control and Sensing:

When one Intelamp solar light detects motion, it sends a signal to other Intelamp solar lights within a 66ft (20m) radius, triggering them to illuminate simultaneously. This creates a continuous, well-lit path as you move.

Image Description: Demonstration of the intelligent mutual control feature, where multiple lights link together to turn on when motion is detected within 100 feet, providing continuous illumination along a path.

Maintenance

To ensure the longevity and optimal performance of your Intelamp Solar Light, follow these maintenance guidelines:

• Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Check Connections: Periodically inspect the waterproof connection cable between the solar panel and the light unit for any signs of wear or damage. Ensure it remains securely connected.
• Battery Care: The built-in Lithium battery is designed for long life. Avoid prolonged storage in extreme temperatures.
• Clear Obstructions: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel.
• Inspect for Damage: Although IP65 rated for weather resistance, periodically check the light unit and solar panel for any physical damage.

Troubleshooting

If your Intelamp Solar Light is not functioning as expected, try the following solutions:

• Light Not Turning On at Night:
  • Ensure the solar panel is receiving adequate direct sunlight (at least 5 hours).
  • Check if the solar panel is dirty; clean it if necessary.
  • Verify that the connection cable between the solar panel and light unit is securely plugged in.
  • Confirm the light is not in an 'OFF' mode via the remote control.
• Light is Dim or Short Illumination Time:
  • The battery may not be fully charged. Ensure the solar panel has sufficient direct sunlight exposure.
  • Weather conditions (overcast, rainy days) can reduce charging efficiency. The light is designed for low light charging even on rainy days, but prolonged poor weather may affect performance.
  • Check for obstructions blocking the solar panel.
• Motion Sensor Not Activating:
  • Ensure the motion sensors are clean and unobstructed.
  • Verify the light is in a motion-sensing mode via the remote control.
  • Check the range and angle of the sensors.
• Lights Not Linking (Intelligent Mutual Control):
  • Ensure all linked lights are within the 66ft (20m) communication range.
  • Check for any physical obstructions between the lights that might interfere with the signal.

Specifications

Image Description: A direct comparison table showing the Intelamp Solar Light's advantages: 20W solar panel, 20000mAh battery, 4000LM brightness, and 2 sensors, versus typical 'Other' lights with 1.5W, 1500mAh, 600LM, and 1 sensor.

User Tips

• For best performance, ensure the solar panel is completely free of dust, snow, or leaves, especially during winter months.
• Experiment with different remote control modes to find the best setting for your specific needs and location.
• When installing multiple lights, consider their proximity to maximize the intelligent mutual control feature for seamless illumination.
• If the light seems less bright than expected, allow it a few days of full sun charging to ensure the battery is at its peak capacity.

Warranty and Support

Intelamp is committed to providing high-quality products. For any questions, technical support, or warranty inquiries, please contact our customer service team through the seller's platform or the contact information provided at the point of purchase. Please have your model number (YL005-18GP10) ready when contacting support.