BSMOOM Portable Car Jump Starter User Manual

1. Introduction

Thank you for choosing the BSMOOM Portable Car Jump Starter. This device is designed to provide a reliable solution for jump-starting your vehicle's battery and serving as a portable power bank and emergency flashlight. This manual will guide you through the proper use, maintenance, and troubleshooting of your jump starter to ensure optimal performance and safety.

2. Package Contents

Please check the box for the following items:

• BSMOOM Portable Car Jump Starter Unit
• Smart Jumper Clamps
• USB-C Charging Cable
• User Manual

3. Specifications

4. Safety Information

Your BSMOOM Jump Starter is equipped with multiple safety features to protect both the device and your vehicle. Always follow these guidelines for safe operation:

• Over-Temperature Protection: Prevents overheating during use.
• Over Voltage Protection: Safeguards against excessive voltage input.
• Over Charge Protection: Protects the internal battery from overcharging.
• Short Circuit Protection: Automatically shuts off in case of a short circuit.
• Over Discharge Protection: Prevents the internal battery from being fully depleted.
• Reverse Polarity Protection: Alerts and protects if clamps are connected incorrectly.
• Over Current Protection: Guards against excessive current draw.
• Anti-Interference Protection: Ensures stable operation without electrical interference.

General Safety Precautions:

• Read all instructions before using the product.
• Do not operate the unit if it is damaged.
• Keep out of reach of children.
• Do not expose the unit to rain or extreme moisture.
• Ensure proper ventilation during use and charging.

5. Initial Setup and Charging

Before first use, fully charge your BSMOOM Jump Starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even when not in use.

5.1 Charging the Jump Starter

1. Connect the included USB-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The LCD display will show the charging status and battery percentage. Charge until the display shows 100%.

6. Operating Instructions

6.1 Jump Starting a Vehicle

Ensure the jump starter is fully charged before attempting to jump-start a vehicle.

1. Connect Clamps: Insert the blue plug of the smart jumper clamps into the jump starter's port. Ensure it is fully seated.
2. Attach to Battery: Connect the red (+) clamp to the positive (+) terminal of your vehicle's battery. Connect the black (-) clamp to the negative (-) terminal of your vehicle's battery.
3. Check Indicator: The smart jumper cable indicator light will show green if the connection is correct and safe to proceed. If it shows red or flashes, check the connections and ensure there are no issues like reverse polarity.
4. Start Vehicle: Once the indicator is green, start your vehicle's engine.
5. Remove Clamps: After the vehicle starts, immediately remove the jumper clamps from the vehicle battery, then disconnect the clamps from the jump starter.

6.2 Using as a Portable Power Bank

The jump starter can charge various electronic devices via its USB and Type-C ports.

1. Connect Device: Use a compatible USB or Type-C cable to connect your electronic device (smartphone, tablet, etc.) to the jump starter's output ports.
2. Charging: The jump starter will automatically begin charging your device. The LCD display may indicate 'OUT' when discharging.
3. Auto Shut-off: The unit will automatically turn off when not in use or when the connected device is fully charged.

6.3 Using the LED Flashlight

The integrated LED flashlight offers multiple modes for various situations.

1. Turn On/Off: Press and hold the flashlight button to turn the LED light on or off.
2. Change Modes: Briefly press the flashlight button to cycle through the modes: Stable Light > SOS Signal > Strobe Light.

7. Maintenance and Storage

• Cleaning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Charging: Recharge the unit every 3-6 months to prolong battery life, even if not used.
• Storage: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The unit is designed to operate in extreme temperatures (-4°F to 140°F / -20°C to 60°C), but for long-term storage, room temperature is ideal.
• Battery Care: Avoid fully discharging the unit frequently, as this can reduce battery lifespan.

8. Troubleshooting

Unit does not turn on:

Ensure the unit is charged. If not, connect it to a power source using the USB-C cable.

Vehicle does not start after jump-starting:

Check that the jumper clamps are securely connected to the correct battery terminals. Ensure the jump starter has sufficient charge. If the vehicle still doesn't start after a few attempts, there might be a larger issue with the vehicle's battery or engine.

Smart clamps show a red or flashing light:

This indicates an incorrect connection (e.g., reverse polarity) or a fault. Disconnect the clamps and re-attach them carefully, ensuring red is to positive (+) and black is to negative (-).

Device not charging from power bank ports:

Ensure the jump starter has enough charge. Check the charging cable and the device's charging port for damage. The unit automatically turns off when not in use, so ensure it's active when connecting a device.

9. User Tips

• Always keep your jump starter charged, especially before long trips or during colder months when battery issues are more common.
• Familiarize yourself with your vehicle's battery location and terminals before an emergency arises.
• The compact size makes it easy to store in your glove compartment or trunk for quick access.

10. Frequently Asked Questions

Can I jump-start a completely dead battery?

Yes, the BSMOOM Jump Starter is designed to jump-start vehicles with completely dead 12V batteries.

How many times can it jump-start a car on a single charge?

The number of jump starts depends on the battery capacity of the unit and the condition of the vehicle's battery. A fully charged unit can typically provide multiple jump starts.

Is it safe to leave the jump starter connected after the car starts?

No, it is crucial to disconnect the jumper clamps immediately after your vehicle starts to prevent damage to the jump starter or your vehicle's electrical system.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official BSMOOM website.