1. Introduction
Welcome to the iScooter DX5 Electric Scooter user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Image: The iScooter DX5 Electric Scooter.
2. Safety Information
⚠ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding.
- Ensure all components are securely fastened before each ride.
- Do not ride in heavy rain or extreme weather conditions.
- Familiarize yourself with local laws and regulations regarding electric scooter usage.
- Avoid riding on slippery surfaces, steep inclines, or uneven terrain.
- Do not perform stunts or aggressive maneuvers.
- Keep both hands on the handlebars while riding.
- Do not carry passengers or heavy loads that exceed the maximum weight limit.
- Always check battery level before riding to avoid unexpected power loss.
3. Package Contents
Upon opening the package, please verify that all the following items are included:

Image: Contents of the iScooter DX5 package.
- 1 x iScooter DX5 Electric Scooter
- 1 x Charger
- 1 x Toolkit
- 1 x Scooter Bag
- 2 x NFC Cards
- 1 x User Manual (this document)
4. Product Overview
Familiarize yourself with the different parts of your iScooter DX5 Electric Scooter:

Image: Labeled components of the iScooter DX5.
- Display
- Mirrors
- Brake Levers
- Twist Throttle
- Bag
- Headlight
- Hydraulic Suspension Fork
- Tubeless Tires
- Hydraulic Disc Brakes (Front + Rear)
- Cargo Basket
- Footrests (Two Sides)
- Kickstand
- Charging Port
- Saddle
- Taillight & Turn Signals & Brake Light 3 in 1
- Air Rear Shock
- Motor
5. Assembly and Initial Setup
Your iScooter DX5 requires some minor assembly before its first use. Please follow these steps carefully:

Image: Components requiring installation.
- Install Rearview Mirrors: Attach the rearview mirrors to the designated slots on the handlebars. Ensure they are tightened securely and adjusted for optimal visibility.
- Attach Handlebars: Secure the handlebars to the steering column. Make sure all bolts are firmly tightened to prevent wobbling during operation.
- Mount Headlight: Install the headlight in its designated position at the front of the scooter. Connect any necessary wiring as per the detailed manual (refer to pages 5-19 of the physical manual for specific wiring diagrams if needed).
- Install Rear Shock Absorbers: If not pre-installed, attach the rear shock absorbers. Ensure they are correctly aligned and secured.
- Attach Rear Fender: Mount the rear fender over the rear wheel.
- Install Footrests: Attach the footrests on both sides of the scooter.
After assembly, perform a thorough check of all connections and moving parts to ensure everything is secure and functioning correctly.
6. Operation
6.1 Powering On/Off and NFC Unlocking

Image: NFC unlocking and speed mode adjustment.
- Activate Air Switch: Firstly, push the air switch to the "ON" position.
- NFC Unlocking: Place your "NFC card" flat on the NFC sensor located on the display. The scooter will emit a "beep" sound indicating successful unlocking.
- Auto P-Lock: When stationary, the scooter will automatically P-Lock. To unlock, hold the brake or shift gear.
6.2 Display Information

Image: 9-inch Full-Color LCD Display details.
The 9-inch full-color LCD display provides real-time operating data:
- Battery Level: Indicates the remaining battery charge.
- Real-Time Speed: Shows your current speed.
- Sport Mode: Displays the active riding mode.
- Trip Distance: Tracks the distance covered during your ride.
- Built-in NFC Sensor: For unlocking the scooter.
The display also features indicators for the headlight, turn signal, horn, and an S-button for gear shifting.
6.3 Speed Modes
| Mode | Original Speed | After Cracking Speed |
|---|---|---|
| 1 Mode | 6km/h | 25km/h |
| 2 Mode | 10km/h | 35km/h |
| 3 Mode | 15km/h | 45km/h |
| 4 Mode | 25km/h | 55km/h |
How to adjust speed:
- Keep the throttle handle turned to the bottom when the scooter is turned off.
- Using NFC to unlock and wait 10 seconds, it can unlock the speed limit when you hear a "beep" sound.
6.4 Braking System

Image: Dual Hydraulic Disc Brakes.
The iScooter DX5 is equipped with dual hydraulic disc brakes on both front and rear wheels. These provide efficient and responsive braking, significantly shortening stopping distances. For added safety, the motor automatically cuts off power when braking.
6.5 Lighting System

Image: Integrated LED Lighting System.
The scooter features an integrated LED lighting system for enhanced visibility and safety, especially during nighttime rides. This includes a bright front headlight and taillights with left and right turn signals.
7. Charging
To charge your iScooter DX5:

Image: High-Capacity Lithium-Ion Battery details.
- Locate the charging port (13 in the Product Overview diagram).
- Ensure the scooter is turned off before connecting the charger.
- Connect the charger to the scooter's charging port, then plug the charger into a standard power outlet.
- The charging indicator on the charger will show the charging status (typically red for charging, green for fully charged).
- A full charge takes approximately 7-8 hours. Do not overcharge the battery.
- Always use the original charger provided with your scooter.
⚠ Important: Unplug the charger once charging is complete. Do not leave the scooter charging unattended for extended periods.
8. Maintenance
- Cleaning: Wipe the scooter with a damp cloth. Do not use high-pressure water jets or immerse the scooter in water. The scooter has an IPX4 waterproof rating, meaning it is resistant to splashes, but not submersion.
- Tires: The scooter is equipped with 15"*3.0" durable vacuum inflatable tubeless tires. Regularly check tire pressure and for any signs of wear or damage. Maintain proper tire pressure for optimal performance and safety.
- Brakes: Periodically check the hydraulic disc brakes for wear on the pads and proper function. Adjust if necessary or have them serviced by a professional.
- Battery Care: For long-term storage, charge the battery to about 50-70% and store in a cool, dry place. Recharge every 1-2 months to prevent deep discharge.
- General Inspection: Regularly check all bolts, nuts, and fasteners to ensure they are tight. Inspect the frame for any cracks or damage.
- Suspension: Check the front hydraulic damping and rear air suspension for proper function and any signs of leaks or damage.
9. Troubleshooting
This section addresses common issues you might encounter with your iScooter DX5.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; Air switch off; Faulty connection | Charge the battery; Ensure air switch is ON; Check all cable connections. |
| NFC unlock fails | NFC card not placed correctly; Sensor issue | Ensure NFC card is flat on the sensor; Try another NFC card if available. |
| Reduced range or power | Low battery; Overload; Tire pressure low; Battery degradation | Fully charge battery; Reduce load; Check and inflate tires; Consult support if battery is old. |
| Brakes feel weak | Worn brake pads; Air in hydraulic system; Loose cables | Inspect and replace brake pads; Bleed hydraulic system (professional service recommended); Tighten brake levers. |
| Unusual noises during ride | Loose components; Debris in wheels/motor; Worn bearings | Check all fasteners; Inspect wheels and motor for foreign objects; Consult support for bearing issues. |
If the problem persists after attempting these solutions, please contact customer support.
10. Specifications

Image: iScooter DX5 Specifications Table.
| General | |
|---|---|
| Brand | iScooter |
| Type | Electric Scooter |
| Model | DX5 |
| Color | Grey |
| Performance & Features | |
| Max Motor Power | 1500W |
| Max Climbing | 26% |
| Battery | 48V 15.6Ah |
| Charging Time | 7-8 hours |
| Range | 60-72km |
| Max Speed | 55km/h |
| Brake System | Front & Rear Hydraulic Disc Brakes (with power-off brake) |
| Shock Absorber System | Front Hydraulic Damping & Rear Air Suspension |
| LED Lighting | Headlight, Taillight with Turn Signal |
| Waterproof Rating | IPX4 |
| Tires | 15" * 3.0" Vacuum Inflatable Tubeless Tires |
| Max Load | 150kg |
| Dimensions & Weight | |
| Product Weight | 46.7kg |
| Package Weight | 50.9kg |
| Package Size (L x W x H) | 116 x 22 x 59cm |
| Product Size (L x W x H) | 148 x 68 x 118cm (approximate, based on diagram) |
| Seat Dimensions | 36.5 x 18 x 8cm |
| Cargo Basket Dimensions | 43 x 19.5 x 17.5cm |
| Scooter Bag Capacity | Approx. 2.4L (Outer: 20.5 x 14.5 x 10cm, Inner: 18.5 x 13.5 x 9.5cm) |

Image: Product Dimensions.
11. User Tips
- Tire Performance: The 15-inch tubeless tires offer excellent puncture resistance and grip, making them suitable for various terrains including flat roads and complex surfaces.
- Water Resistance: With an IPX4 waterproof rating, the scooter is designed to handle splashes and light rain. However, avoid riding in heavy downpours or through deep puddles to prevent damage.
- Storage: Utilize the detachable 11.25L front basket and the 2.4L capacity scooter bag for convenient storage of personal items or groceries.
- Comfort: The widened saddle with soft pack sponge and the double shock absorption system (front hydraulic damping and rear air suspension) are designed for a comfortable ride, even on bumpy roads.

Image: Tubeless tire performance on different terrains.

Image: IPX4 Waterproof for DX5 Scooter.

Image: Detachable Front Basket.
12. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact the seller directly. Keep your proof of purchase for any warranty claims.