HOMEFISH Smart Automatic Sensor Foam Dispenser

Contents

HOMEFISH Smart Automatic Sensor Foam Dispenser

User Manual

1. Introduction

Thank you for choosing the HOMEFISH Smart Automatic Sensor Foam Dispenser. This touchless infrared soap dispenser provides a hygienic and convenient way to dispense foam soap or alcohol spray. Featuring automatic sensing, adjustable foam volume, and a rechargeable design, it is suitable for various environments including homes, hotels, and hospitals.

HOMEFISH Smart Automatic Sensor Foam Dispenser with icons for foam, power saving, mute, auto sensing, and 99% antibacterial efficiency.

Figure 1: Product Overview with Key Features

2. Package Contents

Please check the box for the following items:

  • 1 x Automatic Sensor Foam Dispenser (Host)
  • 1 x USB Type-C Charging Cable
  • 1 x Instruction Manual

3. Specifications

Feature Detail
Product Name Rechargeable Soap Dispenser / Alcohol Spray
Brand HOMEFISH
Battery 3.7V/1200mAH 18650 Rechargeable Lithium Battery
Charging Interface USB Type-C
Rated Charging Voltage/Current 5V/0.5A
Capacity Options 600ml or 350ml
Dimensions (600ml) 112mm (W) x 76mm (D) x 210mm (H)
Dimensions (350ml) 112mm (W) x 76mm (D) x 178mm (H)
Material ABS, PET, Silicone
Sensing Distance 4-6 cm (Infrared)
Operating Temperature 3°C to 55°C
Standby Time Over 3 months
Sprays per Charge Over 4000 times
Installation Method Bench Mounted
Product size diagram showing dimensions: 110mm width, 210mm height, 112mm depth, 76mm base width.

Figure 2: Product Dimensions

4. Setup

4.1 Initial Charging

  1. Locate the USB Type-C charging port, typically covered by a silicone stopper, on the top or side of the dispenser.
  2. Connect the provided USB Type-C cable to the dispenser and a 5V/0.5A power adapter (not included).
  3. During charging, a yellow light will flash. The yellow light will turn solid when the battery is fully charged.
  4. Ensure the dispenser is fully charged before first use for optimal performance.
Product details showing 30 degree inclination, USB charging port with silicone waterproof rubber stopper, increased caliber for easy liquid addition, and translucent frosted material.

Figure 3: USB Charging Port and Design Features

4.2 Filling with Soap/Sanitizer

  1. Twist the bottom liquid container counter-clockwise to detach it from the main unit.
  2. For foaming hand soap, pour directly into the container.
  3. For normal liquid hand soap, dilute with water at a ratio of 1:4 (1 part soap to 4 parts water). Stir gently to mix.
  4. Do not fill above the maximum fill line.
  5. Carefully reattach the liquid container by twisting it clockwise until secure.

4.3 Placement

Place the dispenser on a flat, stable surface. This product is designed for bench-mounted use. Ensure it is not tilted to prevent liquid leakage.

5. Operation

5.1 Power On/Off

  • To Power On: Lightly touch the power button on the top of the dispenser. It will enter the first gear, indicated by a green light.
  • To Power Off: Press and hold the power button for 1.5 seconds. The red light will briefly illuminate, then the machine will turn off.

5.2 Adjusting Foam Volume (Gears)

The dispenser has 4 gears, each corresponding to a different liquid outlet time. To cycle through the gears, lightly touch the power button:

  • 1st Gear (Green Light): Liquid outlet time 0.5 seconds.
  • 2nd Gear (Blue Light): Liquid outlet time 0.8 seconds.
  • 3rd Gear (Purple Light): Liquid outlet time 1.1 seconds.
  • 4th Gear (White Light): Liquid outlet time 2.5 seconds.

After the 4th gear, touching the button again will return to the 1st gear (green light).

Diagram showing the four gear settings with corresponding light colors (green, blue, purple, white) and liquid output times (0.5s, 0.8s, 1.1s, 1.4s).

Figure 4: Gear Settings and Dispensing Times

5.3 Automatic Dispensing

Once the machine is powered on and a gear is selected, place your hand under the sensor area (sensing distance is 4-6 cm). The dispenser will automatically release foam. To dispense again, simply place your hand under the sensor area once more.

Hand under the dispenser, showing foam being dispensed with sensitive sensing to prevent mis-spray.

Figure 5: Automatic Sensing Operation

5.4 First Use / Refill Priming

When using the product for the first time, or after refilling the liquid container when it was empty, the dispenser may need to be activated 2-3 times to evacuate air from the pump before liquid is dispensed normally.

6. Maintenance

  • Cleaning the Sensor: If the red light flashes in standby mode, it indicates the sensor is blocked by foreign matter. Wipe the sensor area clean with a soft, dry cloth.
  • General Cleaning: Do not flush the machine body directly with water, as this may cause damage. Use a damp cloth to wipe the exterior.
  • Storage: If the dispenser will not be used for a long period, turn it off and store it in a dry place.
  • Avoid Tilting: Do not tilt the dispenser body, especially when filled, to prevent liquid leakage.
  • Temperature: Operate the device within the normal ambient temperature range of 3°C to 55°C.

7. Troubleshooting

Problem Possible Cause Solution
Red light flashes during dispensing Low battery Charge the dispenser using the provided USB Type-C cable.
Red light flashes in standby mode Sensor blocked by foreign matter Wipe the sensor area clean with a soft, dry cloth.
No foam dispensed on first use or after refill Air in the pump system Activate the dispenser 2-3 times to evacuate air until liquid dispenses normally.
Liquid leakage Dispenser tilted or container not secured Ensure the dispenser is on a flat surface and the liquid container is tightly secured.
Dispenser not turning on or responding Battery depleted or internal electronic issue Charge the device. If the issue persists, ensure the charging voltage is 5V. Avoid strong impacts.

8. User Tips

  • Soap Dilution: For best foaming results with normal liquid hand soap, always dilute it with water at a 1:4 ratio (1 part soap to 4 parts water). Foaming hand soap can be used directly.
  • Optimal Sensing: The infrared sensor works best when your hand is placed 4-6 cm directly below the nozzle.
  • Battery Life: A full charge can provide over 4000 sprays and offers a standby time of over 3 months.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact the seller or refer to the contact information provided at the point of purchase. Please retain your proof of purchase for warranty purposes.

Important: Charging the device with improper voltage (other than 5V) may cause severe damage and void the warranty.

© 2023 HOMEFISH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.