BAJETON USB Programming Cable

Contents

BAJETON USB Programming Cable User Manual

1. Product Overview

This universal intercom programming cable (hereinafter referred to as "programming cable") is designed to establish a connection between intercoms and computers. It enables data transmission for intercom frequency programming, channel setting, function configuration, and data backup/restoration. With a durable cable body and stable transmission chip, it is compatible with most mainstream intercom models and suitable for commercial, industrial, and public security communication scenario configuration needs.

BAJETON USB Programming Cable with RJ45 connector and a mobile radio display.
Figure 1: BAJETON USB Programming Cable

2. Setup Instructions

2.1 Preparation

  1. Intercom Power: Confirm that the intercom is powered off.
  2. Port Type: Check the programming port type of your intercom (e.g., USB, 2.5mm, 3.5mm, 6-pin) and ensure it matches the programming cable interface (RJ45 for this model).
  3. Software Installation: Install the corresponding programming software on your computer. This software is typically provided by the intercom manufacturer or is a compatible universal software. If you do not have the frequency writing software for your walkie-talkie model, please contact the seller for assistance.
  4. Driver Installation: When connecting the cable to your computer for the first time, the system may automatically install necessary drivers. If not, you may need to manually install the driver.

2.2 Connection

  1. Insert the USB-A end of the programming cable into an available USB port on your computer. Wait for the computer to recognize the device and install any necessary drivers.
  2. Connect the RJ45 end of the cable to the intercom's programming port. Ensure it is inserted firmly and securely without looseness.
Programming cable connected to a Chierda M520D radio, with a laptop displaying programming software.
Figure 2: Cable connected to radio and laptop with programming software
Close-up view of the USB-A connector and the RJ45 connector of the programming cable.
Figure 3: USB-A and RJ45 Connectors

3. Operating Instructions

3.1 Programming Operation

  1. Turn on the intercom after connecting the cable.
  2. Open the installed programming software on your computer.
  3. Within the software, select the correct intercom model and the communication port (COM port) that the cable is using. You can check the COM port in your computer's device manager if needed.
  4. Proceed with frequency setting, channel editing, function configuration, or data backup/restoration according to the software prompts.
  5. Important: Do not disconnect the cable during data transmission to avoid programming failure or intercom damage.

3.2 Disconnection & Completion

  1. After completing programming, save the configuration within the software first.
  2. Turn off the intercom.
  3. Gently pull the programming cable from both the computer and intercom interfaces to disconnect. Do not pull the cable body directly to prevent wire breakage or interface damage.

4. Maintenance & Care

  1. Cleaning: Clean the cable interfaces and surface regularly with a dry, soft cloth. For stubborn dirt or oxidation, gently wipe with a cotton swab dipped in anhydrous alcohol, and ensure it is completely dry before use.
  2. Inspection: Regularly check the cable body for cracks, wear, or wire exposure. Inspect the connectors for looseness or deformation. Replace the cable immediately if any abnormality is found.
  3. Storage: When not in use, coil the cable neatly (avoid tight winding) and store it in a dry, well-ventilated, dust-free environment. Do not place heavy objects on the cable to prevent pressure damage.
  4. Usage Frequency: Avoid plugging and unplugging the cable frequently when not necessary, as this can reduce interface wear and extend service life.

5. Troubleshooting

  • Cable Not Recognized: If the cable cannot be recognized by your computer, ensure the drivers are correctly installed. Insert the cable into both the walkie-talkie and computer, then check the COM port settings in your computer's Device Manager.
  • Programming Failure: Ensure the cable is not disconnected during data transmission. Verify that the correct intercom model and COM port are selected in the programming software.
  • Cable Abnormality: If the cable shows signs of abnormality (heating, discoloration, peculiar smell, or unstable transmission), stop using it immediately and disconnect it from all equipment. Contact the seller or an authorized service center for inspection.
  • Software Issues: Ensure the programming software is from official or trusted sources to avoid virus infection and equipment damage during data transmission.

6. Specifications

  • Item Type: Programming Cable
  • Wireless Function: No
  • Cable Length: Up to 100 cm (39.37 inches)
  • Operating Temperature: -10°C to 50°C
  • Storage Temperature: -20°C to 60°C
  • Rated Voltage: Compatible with devices using 5V DC (Do not exceed to prevent damage).
The full length of the 100cm programming cable, highlighting its connectivity length.
Figure 4: Cable Length (100cm)
Close-up of the cable's durable jacket, emphasizing its high quality and resistance to bending.
Figure 5: High Quality and Durable Cable

7. User Tips

  • Always ensure you have the latest version of the programming software and any necessary firmware for your radio model.
  • If you encounter issues with cable recognition, try connecting to a different USB port on your computer.
  • For any software-related queries or if you need the programming software for your specific radio model, contact the seller directly.

8. Safety Information

Warning: To ensure safe use of the product, protect personal safety, and avoid equipment damage, please read and abide by the following precautions carefully.

  • Usage Environment: Do not use the programming cable in explosive, flammable, or high-dust environments to avoid safety hazards caused by electrical faults.
  • Temperature Limits: Do not use or store the cable in environments exceeding the operating (-10°C to 50°C) or storage (-20°C to 60°C) temperature ranges to prevent component aging and transmission instability.
  • Water Exposure: The cable is not waterproof. Do not immerse it in water, expose it to heavy rain, or use it in high-humidity environments to avoid short circuits and chip damage.
  • Voltage Compatibility: Do not use the cable with intercoms or computers that exceed its rated voltage (5V DC) to prevent burning the internal chip of the cable or the equipment interface.
  • Modifications: Unauthorized disassembly, modification, or repair of the programming cable is prohibited. Such operations will damage the product, void any warranty, and may cause equipment failure.
  • Cable Handling: Avoid excessive bending, twisting, or stepping on the cable. The minimum bending radius of the cable body shall not be less than 5cm to prevent internal wire breakage.
  • Data Transmission: Do not use the programming cable for data transmission beyond its specified rate to avoid data loss or transmission errors.
  • Wet Hands: Do not touch the cable interfaces with wet hands. Disconnect the cable before cleaning to avoid electric shock or short circuit of the computer and intercom.
  • Heat & Magnetic Fields: Keep the programming cable away from high-temperature sources (heaters, stoves, high-temperature pipelines) and strong magnetic fields to prevent cable aging and signal interference.
  • Children: Keep the cable out of the reach of children to prevent accidental swallowing of small parts (connectors) or electric shock.
  • System Upgrades: Do not use the programming cable during computer or intercom system upgrades to avoid software conflicts and equipment malfunctions.

9. Applicable Regulations & Harmonized Standards

This product complies with the following international regulations and harmonized standards:

Regulations:

  • Radio Equipment Directive (RED) 2014/53/EU
  • Low Voltage Directive (LVD) 2014/35/EU

Harmonized Standards:

  • EN 300 220-1 V3.1.1 (2017): Electromagnetic compatibility requirements for radio equipment operating in the frequency range 25 MHz to 1 GHz.
  • EN 60950-1:2006+A11:2009: Safety requirements for information technology equipment, including electrical business equipment.
  • EN 55032:2015: Electromagnetic emission requirements for multimedia equipment.
  • EN 61000-3-2:2014: Limits for harmonic current emissions (equipment input current ≤16A per phase).

10. Warranty & Support

No specific warranty information is provided with this product. For technical support, software inquiries, or any issues not covered in this manual, please contact the seller directly through your purchase platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.