1. Introduction
Thank you for choosing the HYULIGHTS 24x18W RGBWA UV 6in1 LED Par Light. This professional stage lighting device is designed to provide powerful and versatile illumination for various applications. Please read this manual carefully before installation and operation to ensure safe and proper use.
Package Contents:
- 1 x Stage Light
- 1 x 1.2m Power Cable
- 1 x Instruction Manual
- 1 x Double-bracket yoke (doubles as floor stand) and two screws
Please inspect the package contents for any shipping damage. If damage is found, do not install the device and contact customer support immediately.

Figure 1: Package contents of the LED Par light.
2. Safety Warnings
CAUTION:
- It is forbidden to use this device in thunderstorm weather.
- Avoid exposing the device to blisters (excessive moisture/water).
- Operating temperature range: -20°C to 45°C.
- Always unplug the mains lead before opening the housing for any maintenance or inspection.
- Installation and operation should only be carried out by qualified and certified technicians.
- Ensure the mounting area can withstand a minimum point load of 10 times the weight of the unit.
- Clamp installations must be secured using secondary safety accessories such as appropriate safety cables.
- Never stand directly beneath the unit when installing, removing, or servicing the light fixture.
- Ensure the fixture is at least 0.5m (1.5ft) away from any flammable objects (decorations, etc.).
3. Setup and Installation
3.1. Mounting
The fixture comes with a double-bracket yoke that can be used for hanging or as a floor stand. When mounting overhead, ensure the structure is capable of supporting the weight. Always use safety cables for additional security.
For overhead installations, extensive experience is required, including calculation of working load limits, in-depth knowledge of installation materials, and regular safety inspections. If you lack these qualifications, do not attempt to install it yourself to prevent personal injury.

Figure 2: Front view of two HYULIGHTS LED Par lights, showing the dual-bracket yoke.

Figure 3: Dimensions of the LED Par light (approx. 27cm height, 28.5cm width, 12cm depth).
3.2. DMX-512 Control Connection
The device supports DMX-512 control. Connect the supplied XLR cable to the 3-pin XLR female output of your DMX controller and the other end to the 3-pin XLR male input of the LED Par light. Multiple units can be chained together via a serial link using two-conductor shielded cables with XLR input and output connectors.

Figure 4: DMX 3-pin XLR wiring diagram. Pin 1: Ground, Pin 2: Data (-), Pin 3: Data (+).

Figure 5: Rear panel connections including DMX In/Out and Power In/Out.
4. Operating Modes
4.1. Control Panel Functions
The LED Par light features an advanced LED display with a 4-button control panel for easy navigation and setting adjustments.
8888
◎ MENU UP DOWN ENTER
Figure 6: Digital display and control buttons.
| Key-press | Description |
|---|---|
| MENU | DMX control/color selection/color transformation/color transition/color flash/sound control/color brightness setting. |
| UP | Increase values |
| DOWN | Decrease values |
| ENTER | Confirm button. After pressing this button, all setting values will be saved. |
4.2. Digital Show Function Form
| No | Show | Function | Value | Instruction |
|---|---|---|---|---|
| 1 | d001 | DMX address | 001~512 | 6CH mode, UP/DOWN increase or reduce the value |
| 2 | A001 | DMX address | 001~512 | 10CH mode, UP/DOWN increase or reduce the value |
| 3 | r255 | Red dim | 000~255 | UP/DOWN Change brightness |
| 4 | G255 | Green dim | 000~255 | UP/DOWN Change brightness |
| 5 | b255 | Blue dim | 000~255 | UP/DOWN Change brightness |
| 6 | u255 | White dim | 000~255 | UP/DOWN Change brightness |
| 7 | y255 | Amber dim | 000~255 | UP/DOWN Change brightness |
| 8 | P255 | Ultraviolet dim | 000~255 | UP/DOWN Change brightness |
| 9 | FH99 | Strobe | 01 ~ 99 | UP/DOWN change the speed |
| 10 | CL01 | Colors choose | 01 ~ 08 | UP/DOWN Change color |
| 11 | CC99 | Colors Jump | 01 ~ 99 | UP/DOWN change the speed |
| 12 | DE99 | Colors Gradate | 01 ~ 99 | UP/DOWN change the speed |
| 13 | CP99 | Colors Pulse | 01 ~ 99 | UP/DOWN change the speed |
| 14 | SU01 | Colors sound-Active | 01~09 | UP、DOWN Change the effects |
4.3. DMX Channel Modes
The LED Par light supports both 6-channel and 10-channel DMX modes.
6 Channels Mode:
| Channel | Function | Instruction |
|---|---|---|
| CH1 | R Dimmer | Red Dimmer- Dark to Bright |
| CH2 | G Dimmer | Green Dimmer- Dark to Bright |
| CH3 | B Dimmer | Blue Dimmer- Dark to Bright |
| CH4 | W Dimmer | White Dimmer- Dark to Bright |
| CH5 | A Dimmer | Amber- Dark to Bright |
| CH6 | U Dimmer | Ultraviolet- Dark to Bright |
10 Channels Mode:
| Channel | Function | Instruction |
|---|---|---|
| CH1 | Total Dimmer | RGBW Total Dimmer- Dark to Bright |
| CH2 | R Dimmer | Red Dimmer- Dark to Bright |
| CH3 | G Dimmer | Green Dimmer- Dark to Bright |
| CH4 | B Dimmer | Blue Dimmer- Dark to Bright |
| CH5 | W Dimmer | White Dimmer- Dark to Bright |
| CH6 | A Dimmer | Amber- Dark to Bright |
| CH7 | U Dimmer | Ultraviolet- Dark to Bright |
| CH8 | Total Strobe | RGBW Total Flash Strobe- Slow to Fast |
| CH9 | Function Choice | 000~050: CH1-CH8 Control. 051~100: Different Colors output 101~150: Colors Jump Change. 151~200: Colors Gradate. 201~250: Colors Pulse Change. 251~255: Sound-Active |
| CH10 | Function/Speed | Slow to Fast (At the Colors output and sound choose the color) |
This product can achieve the best effect when paired with a fog machine!
4.4. Visual Demonstrations
Video 1: Demonstration of RGBWA UV 6in1 wash effects and full electronic dimming & strobe functions.

Figure 7: Red wash effect from the LED Par light.

Figure 8: Green wash effect from the LED Par light.

Figure 9: Blue wash effect from the LED Par light.

Figure 10: Yellow/Amber wash effect from the LED Par light.

Figure 11: Purple/UV wash effect from the LED Par light.

Figure 12: White wash effect from the LED Par light.
5. Specifications
| Attribute | Value |
|---|---|
| Voltage | AC90V-240V, 50-60Hz |
| LED Quantity | 24PCS RGBWA UV 6in1 High Power LEDs |
| Wash Angle | 40 degrees |
| Material | Aluminum (Cast aluminum chassis, honeycomb design, high quality cooling system) |
| Control Mode | Auto, Sound, DMX, Master/Slave |
| DMX Channels | 6/10 CH |
| Color Mixing | Revolutionary 6in1 LED diodes provide unmatched color mixing with no flicker and multi-colored shadowing (16.7 million kinds of color change) |
| Dimming | Full electronic dimming (0-100%) |
| Strobe | 1-30FPS (Flashes per second) |
| Display | Advanced LED display with 4-button control panel |
| Connectors | 3-pin DMX input and output connectors, Power in/out |
| Mounting | Dual locking yokes for positioning flexibility |
| Waterproof Type | Indoor using |
| Net Weight (N.W) | 2.3 KG |
| Gross Weight (G.W) | 2.8 KG |
| Packing Size | 25cm x 25cm x 13cm |
| Luminous Flux | 2000-82000 |
| Power (W) | 150-200w |
| Certification | CE, RoHS |

Figure 13: Close-up view of the RGBWA UV 6in1 LED diodes.
6. Maintenance
To ensure optimal performance and longevity of your LED Par light, regular maintenance is recommended:
- Cleaning: Periodically clean the lens and housing with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
- Inspection: Regularly check all cables and connections for any signs of wear, damage, or loose fittings.
- Cooling System: Ensure the cooling system (honeycomb design) is free from dust and obstructions to prevent overheating.
- Storage: When not in use, store the light in a dry, dust-free environment.
Always unplug the device from the power source before performing any cleaning or maintenance.
7. Troubleshooting
If you encounter issues with your LED Par light, consider the following common troubleshooting steps:
- No Power: Check the power cable connection, the power outlet, and the fuse on the rear panel (refer to Figure 5).
- No Light Output: Verify the control mode settings (Auto, Sound, DMX, Master/Slave). Ensure dimming channels are not set to zero in DMX mode.
- Incorrect Colors/Flickering: Check DMX connections and address settings. Ensure the DMX cable is properly shielded and connected.
- Unresponsive Controls: Try restarting the device. If using DMX, ensure the controller is functioning correctly.
For persistent issues, refer to the detailed DMX channel instructions in Section 4.3 or contact customer support.
8. User Tips
Based on user feedback, here are some tips for getting the most out of your HYULIGHTS LED Par Light:
- Users consistently praise the product for its professional quality and performance, noting it performs exactly as advertised.
- The light is highly recommended for its ease of use and effective output.
- Consider pairing the LED Par light with a fog machine for enhanced visual effects, as it is designed to work well in such environments.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
A digital version of this user manual is available for download at this link.