1. Product Overview
The TELESIN Fun Shot Magnetic Grip 2 transforms your smartphone into a DSLR-style camera, offering enhanced grip, stability, and intuitive controls. It features a detachable wireless remote and magnetic attachment for seamless use with both MagSafe and non-MagSafe compatible phones.

Figure 1: TELESIN Fun Shot Magnetic Grip 2 with accessories.
Package Contents
- 1 x Camera Grip
- 1 x Magnetic Ring
- 1 x Cleaning Kit
- 1 x Phone Lanyard
- 1 x Charging Cable
- 1 x Instruction Manual

Figure 2: Items included in the package.
2. Setup and Installation
Compatibility
The Fun Shot Magnetic Grip 2 is compatible with:
- Mobile phones / Tablets
- Laptops / Desktop computers (for remote control functionality)
- Related electronic and digital devices
It supports a wide range of smartphones, including iPhone 12 and newer models (with MagSafe), and various Android phones. For non-MagSafe phones or cases, a magnetic ring is provided for secure attachment.

Figure 3: Compatibility with MagSafe and non-MagSafe phones.
Attaching the Grip to Your Phone
- For MagSafe Phones/Cases: Simply align the magnetic grip with the MagSafe area on your iPhone or MagSafe-compatible case. The strong magnets will snap it securely into place.
- For Non-MagSafe Phones/Cases:
- Ensure the back of your phone case is smooth and clean.
- Peel off the adhesive backing from the included magnetic ring.
- Carefully center and stick the magnetic ring onto the back of your phone case.
- Allow the magnetic ring to sit for 2 hours before attaching the grip to ensure a strong bond.
- Important: Never mount magnetic rings directly on phones without a case.

Figure 4: Magnetic attachment strength.
Connecting via Bluetooth (TELESIN_MG)
- First-time use: Press and hold the shutter button on the grip for 2 seconds to power it on.
- On your smartphone, go to Bluetooth settings and search for available devices.
- Select 'TELESIN_MG' from the list to pair.
- The grip is plug-and-play and does not require additional app downloads for basic functionality.
iPhone Specific Settings (Zoom)
For iPhone users, after the first connection, you may need to adjust accessibility settings for optimal use:
- Go to Settings → Accessibility → Zoom → Enable Zoom.
- When Zoom is enabled, tap three fingers twice to restore the view.

Figure 5: iPhone Bluetooth and Zoom settings.
3. Operating Instructions
Basic Camera Controls
The grip provides physical controls to enhance your photography experience:

Figure 6: Camera control functions.
- Two-Stage Shutter Button:
- Power on/off: Hold for 2 seconds.
- Half-press: To focus.
- Full-press: To shoot a photo or start/stop recording a video.
- Two half-presses: To switch between front and rear cameras.
- Quick Zoom Lever: Use the lever to quickly switch focal lengths or zoom in/out.
- Mode Switch Buttons (DSLR-Style Shutter):
- Press Mode1/Mode2 to toggle between different camera modes (e.g., Photo, Portrait, Panorama).
- If the phone screen is off, hold Mode1 for 2 seconds to wake the screen.
Detachable Wireless Remote Control
The shutter module can be detached from the grip and used as a wireless remote control with a range of up to 10 meters (32.8 feet).

Figure 7: Detachable remote control in use.
Accessory Expansion
The grip features a 1/4”-20 tripod screw connector, allowing you to attach various accessories such as tripods, microphones, or additional lighting. It also works seamlessly with TELESIN magnetic selfie light series.

Figure 8: Dual-sided MagSafe support for accessories like fill lights.
Product Demonstration Video
Video 1: A short demonstration of the TELESIN Fun Shot Magnetic Grip 2's features and usage.
4. Maintenance
- Cleaning: Use the provided cleaning kit or a soft, dry cloth to clean the grip. Avoid harsh chemicals.
- Storage: Store the grip in a cool, dry place when not in use.
- Environmental Conditions: Do not use or store the product in humid or high-temperature environments.
- Handling: Avoid dropping, applying heavy pressure, or forceful pulling on the device.
5. Troubleshooting
- Grip not powering on: Ensure the grip's battery is charged. Connect the Type-C charging cable to the hidden port on the grip.
- Bluetooth connection issues:
- Make sure the grip is powered on (hold shutter button for 2 seconds).
- Check your phone's Bluetooth settings to ensure 'TELESIN_MG' is paired. If not, unpair and re-pair the device.
- Ensure the grip is within the 10-meter operating range of your phone.
- If inactive for 5 minutes, the controller enters sleep mode; after 30 minutes, it shuts off. Press any button to wake it or power it on again.
- Magnetic attachment not secure:
- For non-MagSafe phones, ensure the magnetic ring is properly adhered to a smooth phone case and has cured for at least 2 hours.
- Verify there are no obstructions between the grip and your phone/case.
- Shutter button not responding: Check Bluetooth connection and ensure the grip is powered on.
6. Specifications

Figure 9: Product specifications.
| Feature | Detail |
|---|---|
| Brand Name | TELESIN |
| Model Number | P5-MP-001WH (White) / P5-MP-001BK (Black) |
| Material | ABS/PC/Aluminum Alloy |
| Dimensions | 124.7 x 79.6 x 37.7 mm (4.91" x 3.13" x 1.48") |
| Folded Length | 138 mm |
| Weight | 109 g |
| Charging Port | Type-C |
| Battery | 80mAh 3.7V |
| Charge Time | 2 hours |
| Battery Life | ~10,000 clicks/charge |
| Communication | Bluetooth (iOS/Android/HarmonyOS) |
| Expansion Port | 1/4"-20 Thread |
| Remote Control Range | Up to 10 meters (32.8 feet) |
7. Warranty and Support
If you encounter any issues during use, please contact customer service via your order page first. We guarantee:
- Prompt response
- Proactive resolution
- Practical and reasonable solutions
Your satisfaction is our top priority. For more detailed information, please refer to the official user manual PDF: View User Manual (PDF)
8. User Tips
- Optimal Magnetic Hold: For the strongest magnetic connection, especially with non-MagSafe phones, ensure the magnetic ring is applied correctly to a smooth, clean phone case and allowed to set for the recommended time.
- Remote Control Battery: Keep the detachable remote control charged to ensure uninterrupted shooting. The Type-C charging port is conveniently hidden on the grip.
- Expand Your Setup: Don't forget to utilize the 1/4"-20 thread to attach tripods or other accessories for more versatile shooting angles and stability.
- Ergonomic Comfort: The ergonomic finger hook design is meant to provide a comfortable and stable grip, reducing hand fatigue during long shooting sessions. Experiment with different hand positions to find what works best for you.