Godox iFlash Magnetic Attachment MA01 Kit User Manual

1. Introduction

The Godox iFlash Magnetic Attachment MA01 Kit is a versatile accessory system designed to enhance the creative capabilities of your iM20, iM22, iT20, and iT22 Speedlites. This kit utilizes a magnetic attachment system for quick and easy modification of your flash light, offering a range of light shaping tools including color filters, a honeycomb grid, and a diffuser.

2. Kit Components

The MA01 kit includes the following items:

• Honeycomb Grid: For directing light and creating a more focused beam.
• Diffuser: For softening light and reducing harsh shadows.
• Color Filters: A selection of filters for color correction and creative effects. These include:
  • 1/1 CTB (Color Temperature Blue)
  • 1/2 CTB
  • Cyan
  • Blue
  • 1/2 CTO (Color Temperature Orange)
  • 1/1 CTO
  • Yellow
  • Magenta
  • 1/1 TG (Tungsten Green)
  • Green
  • Red
• Iron Sheets (x4): These are used to enable magnetic attachment on compatible flash units that may not have built-in magnetic surfaces.

3. Setup and Installation

Follow these steps to set up your Godox iFlash Magnetic Attachment MA01 Kit with your compatible Speedlite:

1. Prepare Your Speedlite: Ensure your Godox iM20, iM22, iT20, or iT22 Speedlite is clean and free of dust on the flash head where the attachments will be placed.
2. Attach Iron Sheets (if necessary): If your Speedlite's flash head does not have a built-in magnetic surface, carefully peel the backing from one of the included iron sheets and firmly apply it to the front of your flash head. Ensure it is centered and securely adhered. Repeat for additional flash units if you have more than one.
3. Attach Modifiers: Select the desired modifier (diffuser, honeycomb grid, or a color filter). The modifiers have built-in magnets. Simply align the modifier with the iron sheet (or magnetic surface) on your flash head, and it will snap into place.
4. Stacking Modifiers: The magnetic design allows for stacking multiple modifiers. For example, you can attach a color filter and then a diffuser on top of it to achieve both color correction and light softening.

4. Operating the Kit

The MA01 kit is designed for intuitive and flexible use:

4.1 Using Color Filters

Color filters are used to adjust the color temperature of your flash or to add creative color effects to your images.

• Color Temperature Correction: Use CTB (Blue) filters to cool down the flash light (e.g., to match daylight or tungsten light for a cooler look). Use CTO (Orange) filters to warm up the flash light (e.g., to match tungsten light or for a warmer skin tone). The 1/1 filters provide stronger correction than 1/2 filters.
• Creative Colors: Experiment with Cyan, Blue, Yellow, Magenta, Green, and Red filters to introduce specific color casts for artistic purposes.

4.2 Using the Honeycomb Grid

Attach the honeycomb grid to your flash to narrow the beam of light. This creates a more dramatic, focused light with a gradual fall-off, ideal for accentuating subjects or creating rim lighting.

4.3 Using the Diffuser

The diffuser spreads the light from your flash over a wider area, making it softer and more even. This helps to reduce harsh shadows and create a more flattering light, especially for portraits.

4.4 Stacking Modifiers for Advanced Effects

The magnetic system allows for easy stacking of multiple modifiers. For example, you can combine a color filter with a diffuser or even multiple color filters to achieve complex lighting effects.

5. Care and Maintenance

• Cleaning: Use a soft, lint-free cloth to gently wipe the surfaces of the filters, diffuser, and honeycomb grid. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the modifier).
• Storage: Store the kit components in a clean, dry place, preferably in their original packaging or a protective case, to prevent scratches and dust accumulation.
• Handling: Avoid dropping the modifiers or exposing them to extreme temperatures, which could cause damage or warping.

6. Troubleshooting

• Modifier not attaching securely: Ensure the iron sheet is properly adhered to your flash head (if applicable) and that both the modifier and the flash head are free of debris that might interfere with the magnetic connection.
• Unwanted color cast: Double-check that you are using the correct color filter for your desired effect. If using multiple filters, ensure they are compatible and producing the intended result.
• Light is too harsh/soft: Adjust your choice of modifier. Use the diffuser for softer light and the honeycomb grid for more directional, harsher light.

7. Specifications

8. User Tips

• Experiment with Stacking: Don't be afraid to combine different filters and modifiers. For instance, a subtle CTO filter under a diffuser can provide a warm, soft light.
• White Balance is Key: When using color filters, remember to adjust your camera's white balance accordingly to achieve the desired effect. For color correction, setting a custom white balance can yield the most accurate results.
• Keep it Clean: Dust and fingerprints on filters can degrade light quality. Regular cleaning ensures optimal performance.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or refer to the official Godox website for detailed support resources. As the product originates from Mainland China, specific warranty terms may vary by region.