Introduction
The Askar 107PHQ is a high-performance F/7 Quadruplet Flat Field Astrograph Refractor Telescope designed for both astrophotography and visual observation. As the first long-focal-ratio Flatfield astrograph from Askar, the 107PHQ aims to provide a user-friendly experience for both beginners and experienced enthusiasts. Its optimized quadruplet APO design, including two ED glass elements, ensures excellent color correction and a flat field across a 44mm image circle, eliminating the need for an additional field flattener or complex back-focus calculations.

Setup and Assembly
This section outlines the steps to set up your Askar 107PHQ telescope and its accessories.
Unpacking
Carefully unpack all components from the high-quality aluminum case. The standard package includes:
- Askar 107PHQ Optical Tube Assembly (OTA)
- Pair of tube rings
- Askar 300mm Vixen-style dovetail plate
- Set of four-piece M86-M48 adapters
- High-quality aluminum case

Mounting the Telescope
- Attach the tube rings to the Askar 300mm Vixen-style dovetail plate using the provided hardware.
- Carefully place the 107PHQ OTA into the tube rings and secure it firmly.
- Mount the dovetail plate onto your equatorial or alt-azimuth mount. Ensure the mount is stable and properly balanced.

Connecting Accessories and Reducer
The 107PHQ features a 3.4" rigid focuser with a long travel distance of 95mm. It comes with a set of four-piece M86-M48 adapters for various connections.
For astrophotography, the telescope is designed to provide a flat field without an external flattener. The maximum accessory connection distances (with the focuser fully retreated) are:
- 79mm (from the base of M48×0.75 male thread)
- 99mm (from the base of M54×0.75 male thread)
- 119mm (from the base of M68×1 male thread)
- 149mm (from the base of M86×1 male thread)
For visual observation, the maximum accessory connection distance is 120mm (from the end of the 2" visual back).
Optional 0.7x Reducer Installation
An optional 3" 0.7x full-frame reducer is available for the 107PHQ (and 130PHQ) to shorten the focal ratio and focal length for deep-sky astrophotography.

- Position the 107PHQ OTA and the 0.7x reducer.
- Unscrew the 107PHQ rear-end M86 to 2" adapter.
- Unscrew the end cap of the 0.7x reducer.
- Insert the reducer into the inner tube of the focuser and tighten it securely.
The reducer has a standard 55mm backfocus and comes with M68, M54, and M48 thread adapters for convenient connection to various cameras and accessories.

Operating the Telescope
Astrophotography
The Askar 107PHQ is optimized for astrophotography with its quadruplet APO design and built-in flat field correction. This means:
- No Flattener Needed: You do not need to attach an external field flattener.
- Simplified Back Focus: No complex back-focus calculations are required. Simply equip your imaging device (camera, filter wheel, etc.) and ensure it reaches focus.
- Full Frame Support: The telescope supports 44mm full-frame imaging, providing sharp stars across the entire field.
- Excellent Vignetting Control: The optical design minimizes vignetting, ensuring even illumination in your images.

When using the optional 0.7x reducer, the focal ratio is shortened to f/4.9 and the focal length to 524mm. This allows for shorter exposure times and a wider field of view, beneficial for capturing larger deep-sky objects.
Visual Observation
The 107PHQ is also suitable for visual observation. It is compatible with 1.25" and 2" zenith mirrors, as well as various eyepieces. Its excellent color correction, even at high magnifications (up to 300x), makes it suitable for observing planets and other celestial objects.
To use for visual observation, attach your diagonal and eyepiece to the focuser. Adjust the focuser until the image is sharp.
Maintenance
Proper maintenance will ensure the longevity and optimal performance of your Askar 107PHQ telescope.
- Cleaning Optics: Only clean optical surfaces when absolutely necessary. Use a soft brush or compressed air to remove loose dust. For stubborn smudges, use a specialized optical cleaning solution and a clean microfiber cloth, applying minimal pressure. Avoid touching the lens surfaces with bare hands.
- Storage: When not in use, store the telescope in its original aluminum case in a dry, dust-free environment. Ensure all caps are in place to protect the optics.
- Environmental Protection: Avoid exposing the telescope to extreme temperatures, high humidity, or sudden temperature changes, which can lead to condensation. The telescope has an IPX6 water resistance level, meaning it is protected against powerful water jets, but it is not designed for immersion.
- Mechanical Parts: Periodically check all screws and fasteners for tightness. The focuser is designed to be rigid and handle heavy loads; keep it free from dust and debris.
Troubleshooting
If you encounter issues with your telescope, consider the following general advice:
- Unsharp Images: Ensure the focuser is correctly adjusted. Check for condensation on the lenses. Verify that all optical accessories (diagonal, eyepieces, cameras) are securely attached and correctly seated.
- Poor Star Shapes: While the 107PHQ is designed for a flat field, ensure your camera sensor is properly aligned and that the backfocus for any external accessories (like the 0.7x reducer) is correctly set to 55mm. Check for any tilt in your imaging train.
- No Image: Confirm that all lens caps are removed. Ensure your eyepiece or camera is correctly inserted and focused.
For persistent issues or technical support, please refer to the contact information in the Warranty/Support section.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Askar |
| Model Number | Askar 107PHQ |
| Type | Monocular |
| Origin | Mainland China |
| Aperture Size | 107mm |
| Focal Length | 749mm |
| Focal Ratio | f/7 |
| Objective Lens | Quadruplet air-spaced APO (including two ED glass) |
| Image Circle | 44mm |
| Total Length (dew shield contracted) | 603mm |
| Total Length (dew shield stretched) | 754mm |
| Net Weight | 5.7kg |
| Gross Weight | 6.9kg |
| Rear-end Thread Type | M86×1 to M68×1, M68×1 to M54×0.75, M54×0.75 to M52×0.75, M52×0.75 to M48×0.75 (with M48×0.75 filter thread) |
| Four-piece Photographic Adapter | M48×0.75 |
| Water Resistance Level | IPX6 |
Optical Performance Diagrams



0.7x Reducer Specifications
- Design: Triplet design with one ED glass.
- Reduction Factor: 0.7x
- Resulting Focal Ratio (with 107PHQ): f/4.9
- Resulting Focal Length (with 107PHQ): 524mm
- Backfocus: Standard 55mm
- Thread Adapters: M68, M54, M48


User Tips
- Collimation Check: For optimal performance, especially in astrophotography, it is recommended to periodically check the collimation of your telescope. While the manufacturer aims for precise factory collimation, transport and handling can sometimes affect it.
- Reducer Backfocus: When using the 0.7x reducer, ensure all camera adapters and accessories maintain the specified 55mm backfocus for the best image quality.
- Dew Control: In humid conditions, consider using a dew shield heater to prevent condensation on the objective lens, which can degrade image quality.
Warranty and Support
For detailed warranty information and technical support, please refer to the official user manual PDF provided by Askar. A digital version of the user manual can be accessed here.
For further assistance, please contact your authorized Askar dealer or the manufacturer's support channels.