playaibox V9-Black-Cable

Contents

Wireless Carplay Android Auto 2-in-1 Smart Dongle Instruction Manual

Model: V9 Series

1. Product Overview

The PLAYAIBOX Wireless Carplay Android Auto 2-in-1 Smart Dongle is designed to convert your car's existing wired Apple CarPlay or wired Android Auto system into a wireless one. This device offers a seamless and convenient way to access your smartphone's features on your car's infotainment display.

Wireless Carplay and Android Auto Smart Dongle
Wireless Carplay and Android Auto Smart Dongle

Key Features:

  • Wireless Apple CarPlay functionality
  • Wireless Android Auto functionality
  • Plug and Play installation
  • Online OTA updates
  • Advanced 5.8GHz wireless technology for stable and fast connection
  • Automatic connection after initial setup

2. Conditions of Use & Compatibility

This device is compatible with original cars that come equipped with wired Apple CarPlay or wired Android Auto from the factory. It does not support vehicles without these wired functionalities.

Mobile Phone Compatibility:

  • **For Apple CarPlay:** Supports iPhone 6 and above, running iOS 10 or higher.
  • **For Android Auto:** Supports Android 11 and above models, and the phone must support wireless Android Auto.
  • Note: Huawei phones with EMUI operating system are generally not supported for wireless Android Auto.

Vehicle Compatibility:

Suitable for original cars with wired CarPlay or wired Android Auto. Examples include, but are not limited to, models from Audi, Benz, Porsche, VW, Volvo, Nissan, Ford, Lexus, Renault, Peugeot, Honda, Toyota, Skoda, and Jeep.

Important: This device does not support BMW, Tesla, Subaru, or Mitsubishi vehicles. Nissan compatibility may vary and is not consistently good.

Compatibility chart for iPhones (iOS 10+) and Android phones (Android 11+) and various car brands
Wide compatibility with various car brands and phone models.

3. Setup Instructions

The Smart Dongle offers a quick and easy plug-and-play setup process.

General Setup Steps:

  1. Plug In: Connect the Smart Dongle to your car's USB port.
  2. Turn on WiFi and Bluetooth: Ensure both WiFi and Bluetooth are enabled on your smartphone.
  3. Pair and Use: On your car's display, look for the Bluetooth name "Smart Dongle-XXXX" (where XXXX is a unique identifier). Pair your phone with this Bluetooth device. Once paired, the system will automatically connect to wireless CarPlay or Android Auto.
Three steps for plug and play setup: plug in, turn on WiFi and Bluetooth, pair and use CarPlay/Android Auto
Visual guide for the plug-and-play setup process.

Wireless CarPlay Connection Method:

  1. Step 1: Verify Wired CarPlay: Make sure your original car comes with its own cable CarPlay.
  2. Step 2: Insert Product: Plug the Smart Dongle into the USB/Type-C interface of your vehicle.
  3. Step 3: Pairing: Turn on Bluetooth and WiFi on your mobile phone, search for the Bluetooth of the car (Smart Dongle-XXXX), and click to pair.
  4. Step 4: Connection Successful: Once connected, you can enjoy the wireless CarPlay function.
Four-step guide for wireless CarPlay connection: check wired CarPlay, insert product, pairing, connection successful
Detailed steps for connecting to wireless CarPlay.

Wireless Android Auto Connection Mode:

  1. Step 1: Verify Wired Android Auto: Make sure your original car comes with wired Android Auto.
  2. Step 2: Insert Product: Plug the Smart Dongle into the USB/Type-C interface of your vehicle.
  3. Step 3: Pairing: Turn on Bluetooth and WiFi on your mobile phone, search for the Bluetooth of the car (Smart Dongle-XXXX), and click to pair.
  4. Step 4: Connection Successful: Once connected, you can enjoy the wireless Android Auto function.
Four-step guide for wireless Android Auto connection: check wired Android Auto, insert product, pairing, connection successful
Detailed steps for connecting to wireless Android Auto.

4. Operating Instructions

Switching Between CarPlay and Android Auto:

If you need to switch from wireless CarPlay to wireless Android Auto functionality (or vice-versa), follow these steps:

  1. Ensure the Smart Dongle is connected to your car's USB port.
  2. Use the Android phone (if switching to Android Auto) or iPhone (if switching to CarPlay) to connect to the device's Bluetooth name ("Smart Dongle-XXXX").
  3. After a successful connection, the device will automatically reset and restart. This process takes approximately 30 seconds. Keep the device powered on during this time.
  4. The system will then switch to the desired functionality, allowing you to use your phone with the corresponding wireless feature.
Diagram showing conversion from wired Apple CarPlay to wireless CarPlay and wired Android Auto to wireless Android Auto
Dual-way connection switch for CarPlay and Android Auto.

Product Demonstration Video:

Video demonstrating the product display and connection process for wireless CarPlay and Android Auto.

5. Maintenance (OTA Update)

The Smart Dongle supports Over-The-Air (OTA) online updates to provide a better user experience and address potential issues. It is recommended to update the device if you experience performance problems or if your mobile phone's operating system has been updated.

If the Wireless Carplay Adapter is working properly, it is generally not recommended to upgrade the firmware unless a specific issue needs to be resolved.

How to Upgrade for iPhone Online:

  1. Connect to Device WiFi: Use your iPhone to connect to the device's WiFi network named "Smart Dongle". The password is "12345678".
  2. Access Backend Page: Open the Safari browser on your iPhone and enter the IP address: 192.168.1.101.
  3. Initiate Update: Click "Visit" or "Go" to enter the online upgrade background interface. Follow the on-screen prompts to perform the update.

How to Upgrade for Android Phone Online:

  1. Connect to Device WiFi: Use your Android phone to connect to the device's WiFi network named "Smart Dongle". The password is "12345678".
  2. Access Backend Page: Open the Chrome browser on your Android phone and enter the IP address: 192.168.1.101.
  3. Initiate Update: Click "Visit" or "Go" to enter the online upgrade background interface. Follow the on-screen prompts to perform the update.
Instructions for OTA online update for iPhone users
OTA online update process for iPhone.

6. Troubleshooting

If you encounter issues with your Smart Dongle, please refer to the following common problems and solutions:

  • No Connection/Device Not Recognized:
    • Ensure your car has factory-wired CarPlay or Android Auto.
    • Check that the dongle is securely plugged into the car's USB port.
    • Verify that your phone's Bluetooth and WiFi are turned on.
    • Try restarting both your phone and the car's infotainment system.
    • Ensure you are pairing with the correct Bluetooth name "Smart Dongle-XXXX".
  • Intermittent Connection/Performance Issues:
    • Check for any physical obstructions or interference near the dongle.
    • Ensure your phone's software is up to date.
    • Consider performing an OTA update for the Smart Dongle if available (refer to Section 5).
    • Try forgetting the Bluetooth connection on your phone and re-pairing.
  • Unable to Access OTA Update Page:
    • Confirm your phone is connected to the "Smart Dongle" WiFi network with the correct password.
    • Double-check the IP address entered in your browser (192.168.1.101).
    • Try using a different browser or restarting your phone.
  • Switching Functionality Issues:
    • Ensure the device remains powered on during the 30-second reset process when switching between CarPlay and Android Auto.
    • Confirm the correct phone type (Android or iPhone) is used for pairing when initiating the switch.

If problems persist, please contact customer support for further assistance.

7. Specifications

Product features and specifications for Car USB CarPlay dongle, including model, power, WLAN, Bluetooth, and dimensions
Detailed product features and specifications.
Product Specifications
AttributeValue
Brand Nameplayaibox
ModelV9 Series
Power Input5V-1A
Working Temperature-20℃ ~ 75℃
WLAN Standard802.11a/b/g/n/ac 2.4GHz & 5GHz
Bluetooth Version5.0
Product Size21.8*21.8*22.8mm
Product Weight6.8g
OriginMainland China

8. Warranty & Support

The product comes with a 365-day guarantee. This warranty covers manufacturing defects and does not cover damage caused by accident, misuse, or modification. The parcel must be returned without personal error use or damage which does not affect the second-sales of the parcel. You can send the item for repair within 1 year after receipt.

For any questions or support needs, please contact our professional team for 1-on-1 guidance:

  • WhatsApp: +86 15211449241
  • Email: 205174429@qq.com

9. User Tips

  • For optimal performance, ensure your car's infotainment system software is up-to-date.
  • Keep your phone's operating system updated to the latest version for best compatibility.
  • If you experience any lag or disconnection, try moving your phone closer to the dongle or ensuring no other devices are causing wireless interference.
  • Always ensure the dongle is securely plugged into the USB port to prevent accidental disconnections.
  • When performing an OTA update, ensure a stable power supply to the dongle and do not interrupt the process.

© 2025 PLAYAIBOX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.