1. General Information
The Zed-Bull is a versatile automotive locksmith tool designed to assist in a wide range of key programming tasks. It is developed for automotive locksmiths and offers advanced technical support and unique properties, making it a powerful device for transponder chip cloning and programming.
The device can identify all transponders used in the automotive industry, including fixed code transponders (e.g., 40, 41, 42, 44, 45) and 4D transponders. It can also copy all types of Texas 4C transponders to battery-less TPX1 transponders.
The Zed-Bull can prepare transponders from EEPROM or MCU data of a car, which can directly start the car or be used for diagnostic devices. It can also calculate PIN codes from EEPROM, MCU, VIN number, or key data for certain car models.
The device is supported by PC software, providing access to useful information about transponders and matching car models with remote programming procedures. The database is stored on the PC hard drive, with unlimited capacity.
The Zed-Bull PC Software is capable of reading and writing to new generation Philips Hitag2 crypto transponders. It supports various transponder types for production, including 11, 12, 13, 33, 40, 41, 42, 44, 45, 46, 61, 62, 65, and 73 for diagnostic devices.
There are two types of tokens: one for free EEPROM & MCU applications and another for transponder production applications. Tokens are loaded as needed.
2. Important Notes and Safety Warnings
- This device is produced for assisting automotive locksmiths.
- Before using the device, read this user manual carefully.
- Avoid strokes to the device and accessories.
- Avoid device and accessories contacting with water and conductive liquids.
- Use only original accessories.
- After using, unplug the power adapter.
- Do not use the device under high electromagnetic fields.
- Use the device in a sturdy, dust-free, well-ventilated place.
- Updated user manuals can be downloaded from the web page.
Battery Warning
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
INGESTION HAZARD:
- This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH OF CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
3. Accessories
The complete package includes the following items:
- Zed-Bull device
- Power Adapter
- Lighter Adapter
- Transponder box
- Zed-Bull Security Login Card
- PC USB Interface Cable
4. Specifications
| Feature | Specification |
|---|---|
| Width | 285 mm |
| Height | 285 mm |
| Depth | 105 mm |
| Weight | 0.6 kg |
| External Power Supply | 100/250 V ~ 50/60Hz AC |
| Current | 117 mA |
| Power Consumption | 1.05 Watt |
| Adapter Type | 9-12 V DC |
| Transponder Frequencies | 125 kHz - 134 kHz |
5. Setup and Software Installation
Before installing the software, ensure your antivirus software and firewall are temporarily turned off to prevent conflicts during installation.
- **Software Download**: After placing your order, contact the seller to receive the software link.
- **Extract Files**: Download and extract the software package (e.g.,
ZED-bull minizedbullft232usbdriver2.0.rar). - **Install .NET Framework**: If not already installed, you must first install Microsoft .NET Framework 3.5. Double-click the installation file and follow the on-screen prompts.
- **Run Setup Wizard**: Navigate to the extracted Zed-Bull software folder. Double-click the setup executable (e.g.,
ZED-BULL.exe) to start the installation wizard. - **Follow Prompts**: Click 'Next' through the setup wizard. You may choose the installation folder or use the default.
- **Complete Installation**: Finish the installation process.
Hardware Connection
All connections for the Zed-Bull are shown in the diagram below:
After the power switch of the Zed-Bull is turned on, the user should place the Security Login card on the antenna. If the Security Login card is not placed on the antenna at startup, the Zed-Bull functions will not work. Pressing button "R" allows you to try logging in again. The Security Login card is placed on the antenna as shown in the picture.
6. Operating Instructions
6.1. Main Menu Overview
The main menu provides access to various functions of the Zed-Bull device. Key elements include:
- KEY-FOB / MAIN MENU: Primary interface for key operations.
- DATABASE: Access to transponder and car model data.
- EXTENDED FUNCTIONS: Advanced programming options.
- TRANSPONDER PRODUCTION: For creating new transponders.
- SETTINGS: Device configuration.
- UPDATE: Software and firmware updates.
- SUPPORT / CONTACT: Help and contact information.
- TRANSPONDER CATALOGUE: List of supported transponders.
To connect the device to the software:
- Select the desired language (e.g., English).
- Choose the correct COM port (e.g., COM11).
- Click the 'Connect' button.
- If connection fails, click 'Refresh Port' and try again.
6.2. Extended Functions
The 'Extended Functions' section allows for advanced operations such as EEPROM and immobox programming. The left side of the window is reserved for EEPROM applications. The picture of the immobox and suitable adapter of the IC programmer is displayed on the bottom left side. Details of the selected module are displayed in the text box below the selected module.
When an IC programmer adapter picture or immobox picture is clicked, a larger picture of each is displayed in another window. The IC that must be removed from the board is marked with a red bubble.
6.3. Device Information and Update
The device information screen displays crucial details about your Zed-Bull, including its serial number (S.NO), software version (VERS), and available tokens (Token).
To update the device software:
- Navigate to the 'UPDATE' tab in the main menu.
- Select 'Update Mode' and choose the update file.
- Click 'Update' to start the process.
- The device display will show 'WAITING FOR FILE' during the update.
- Once updated, the device will prompt 'DEVICE HAS BEEN UPDATED, PLEASE RESTART THE DEVICE'.
6.4. Software Demonstration Video
For a visual guide on software installation and usage, please refer to the official demonstration video:
7. Maintenance
- After using the device, unplug all accessories and keep them in the package.
- Do not place heavy materials on the package.
- Keep the package in room conditions.
- Clean the device with a soft and dry piece of cloth.
- If a problem occurs, do not disassemble the device. Contact your local distributor or device manufacturer for assistance.
8. Troubleshooting
Software Installation Issues
If you encounter issues during software installation, ensure that any antivirus software or firewall on your computer is temporarily disabled. These security measures can sometimes interfere with the installation process of new software, leading to incomplete installations or errors.
If problems persist, refer to the official user manual PDF for more detailed troubleshooting steps. The PDF manual can be found at: Zed-Bull User Manual (PDF).
9. User Tips
- Software Installation: Always ensure your antivirus and firewall are temporarily disabled during software installation to prevent conflicts and ensure a smooth setup.
- Security Login Card: Remember to place the Security Login card on the device's antenna at startup for proper functionality. If login fails, press 'R' to retry.
10. Support
For any technical assistance, warranty claims, or further inquiries regarding your Mini Zed-Bull V508, please contact the seller or the device manufacturer directly. Do not attempt to disassemble or repair the device yourself, as this may void any applicable warranties.