XIAOMI PB2067

Contents

Xiaomi Power Bank 20000 67W User Manual

Model: PB2067 | Brand: XIAOMI

1. Product Introduction

Thank you for choosing the Xiaomi Power Bank 20000 67W. This high-quality portable charger supports two-way fast charging. When paired with compatible Xiaomi smartphones featuring intelligent fast charging, it can deliver a maximum output of 67W. The power bank is built with high-quality lithium-ion batteries and advanced charge/discharge chips, ensuring outstanding performance in terms of safety, fast charging efficiency, and broad compatibility.

It incorporates multiple protection designs to safeguard against common issues such as overcharge, overdischarge, high temperature, and short circuits, providing reliable protection for both the power bank and your digital devices.

The device supports fast charge and discharge with two-way USB-C input and output. The maximum input charging power is 65W, and the maximum output discharge power is 67W. An intelligent USB charging controller is integrated, ensuring compatibility with a wide range of mainstream mobile phones and other digital devices.

2. Safety Warnings

Improper use can lead to battery malfunction, severe heating, fire, or explosion. To prevent personal injury or property damage, please strictly follow these instructions for storage and use:

  • This product is not a toy. Keep it out of reach of children and do not allow children to use or play with it to prevent accidents.
  • When using a power adapter for charging, ensure it is CCC certified and meets relevant standards.
  • Avoid heavy pressure, impact, severe drops, or strong vibration. If any of these occur, or if liquid enters the product, immediately stop use and dispose of it properly.
  • If the product swells, deforms, leaks, or its capacity significantly decreases, discontinue use immediately.
  • Do not place the product in clothing pockets, sealed bags, on beds, sofas, or any other locations that may hinder heat dissipation during charging or discharging. Ensure adequate ventilation. When charging devices for extended periods, do not stack the power bank and devices together; ensure good heat dissipation for all.
  • Do not disassemble, impact, cut, squeeze, puncture, short-circuit, throw into water or fire (including near stoves or heaters), or expose to temperatures above 60℃ (140℉). In hot weather, do not leave the product in an unattended car outdoors or in direct sunlight.
  • This product contains a lithium-ion battery. Do not privately disassemble the casing to avoid battery damage or other hazards.
  • Users must not replace the battery themselves. Using an incorrect battery type may disable safety protection and lead to explosion or fire.
  • Avoid placing the product near magnetic cards (e.g., ID cards, bank cards) to prevent magnetic card failure.
  • Maintain a distance of at least 20cm between the product and implanted medical devices (e.g., pacemakers, cochlear implants) to avoid potential interference.
  • The product has an intelligent temperature control function. Frequent plugging and unplugging during fast charging may cause temperature recognition errors. For continuous charging, avoid frequent plugging and unplugging.
  • This product is not waterproof. Avoid liquid ingress to prevent damage. Do not use if submerged in water.

3. Components Overview

Familiarize yourself with the main components of your Xiaomi Power Bank:

  • USB-C Built-in Cable (IN1/OUT1): For both input and output.
  • Digital Display Screen: Shows battery percentage, charging status, and other indicators.
  • Button: Controls the display and low-current mode.
  • USB-A Port (OUT3): Output only.
  • USB-C Port (IN2/OUT2): For both input and output.
Close-up of the power bank's intelligent digital display screen showing 100% charge.
Intelligent digital display screen showing remaining power.
Close-up of the power bank's built-in USB-C cable, highlighting its design and durability.
Built-in USB-C cable for convenience and durability.

4. Specifications

FeatureDetail
ModelPB2067
Dimensions140 x 72 x 31.2mm (excluding built-in cable)
Battery TypeLithium-ion Battery
Rated Capacity12000mAh (5V/3A)
Rated Energy74.37Wh 11.1V 6700mAh
Input PortsUSB Type C / Built-in USB Type C
Output PortsUSB Type C / Built-in USB Type C / USB-A
Max Multi-port Output67W (5V=3A)
Operating Temperature5℃~35℃
Shell MaterialPlastic
FeaturesBuilt-in Cables, Digital Display
CertificationNONE

Input Parameters:

  • Built-in USB-C (IN1): 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3.25A
  • USB-C (IN2): 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3.25A

Output Parameters:

  • Built-in USB-C (OUT1): 5V=3A, 9V=3A, 11V=6.1A, 12V=3A, 15V=3A, 20V=3.35A
  • USB-C (OUT2): 5V=3A, 9V=3A, 11V=6.1A, 12V=3A, 15V=3A, 20V=3.35A
  • USB-A (OUT3): 5V=3A, 9V=2.23A, 10V=2.25A, 12V=1.67A

5. Initial Setup

Before first use, please fully charge your Xiaomi Power Bank.

6. Operating Instructions

6.1 Digital Display Screen

The digital display provides comprehensive information:

  • Battery Percentage: Shows the current charge level (0-100%). The percentage flashes when below 10%.
  • Low-Current Mode Indicator: Appears when the power bank is in low-current charging mode.
  • Charging Indicator: Appears when the power bank is being charged.
  • Abnormal Indicator: Appears if the power bank detects an abnormal condition.
Close-up of the power bank's digital display showing charging status and percentage.
Digital display showing charging status and percentage.

6.2 Button Operations

Display StateButton ActionPower Bank State
Screen OffShort PressTurn on Display
Screen OnShort PressTurn off Display
Screen Off/OnDouble Short PressTurn on/off Low-Current Mode
Any StateLong Press (approx. 7 seconds)Reset System

6.3 Charging Devices

Connect your device to one of the output ports (USB-C OUT1/OUT2 or USB-A OUT3). The power bank will automatically detect and begin charging. For optimal 67W fast charging, ensure your device supports this power level and use the built-in USB-C cable or a compatible high-wattage cable.

Mobile phone displaying a 67W MAX fast charging animation while connected to the power bank.
Mobile phone fast charging with 67W MAX output.
Xiaomi Power Bank with three devices connected for charging, demonstrating multi-device compatibility.
Three-port output allows charging multiple devices simultaneously.

6.4 Recharging the Power Bank

Connect a power adapter to either the built-in USB-C (IN1) or the USB-C (IN2) port. The power bank supports up to 65W input for rapid recharging. For the best charging experience, it is recommended to use a Xiaomi brand power adapter and cable with 65W or higher charging power.

Xiaomi Power Bank being recharged with a power adapter.
Recharging the power bank.

6.5 Low-Current Mode

This mode is designed for charging small current devices such as Bluetooth earphones, smart bands, or watches.

  • USB-C Ports: When a low-current device is connected to a USB-C port, the power bank will automatically detect it and switch to low-current mode. No manual activation is needed.
  • USB-A Port: To activate low-current mode for the USB-A port, double short press the button. The digital display will show the low-current mode indicator.

Low-current mode will automatically turn off after 2 hours, or you can manually turn it off by double short pressing the button again. If a non-low-current device is connected, the power bank will automatically exit low-current mode. Remember to turn off low-current mode when not in use to conserve power.

Xiaomi Power Bank charging a smartphone and wireless earbuds, demonstrating low-current device compatibility.
Supports charging of low-current devices.

6.6 Interface Protocols

PortSupported Protocols
USB-C Built-in Cable (OUT1)PD2.0, PD3.0 (PPS), BC1.2
USB-C (OUT2)QC2.0, QC3.0, QC3.5, PD2.0, PD3.0 (PPS), BC1.2, Apple2.4A
USB-A (OUT3)QC2.0, QC3.0, QC3.5, BC1.2, Apple2.4A
USB-C Built-in Cable (IN1)PD2.0, PD3.0
USB-C (IN2)QC2.0, PD2.0, PD3.0

7. Care and Maintenance

  • When charging the power bank or using it to charge other devices, always select compatible and appropriately rated chargers and cables. For optimal performance, it is recommended to use Xiaomi brand chargers and cables with 65W or higher power.
  • Ensure supervision during charging. Unplug the charger and cables after charging is complete or before leaving the device unattended for extended periods.
  • Promptly unplug charging cables once the power bank or connected devices are fully charged to prevent long-term connection wear and potential damage.
  • For long-term storage, maintain the power bank's charge level between 25% and 50%. Store it in a cool, dry environment. Avoid storing it fully charged or completely depleted for extended periods to prolong battery life.

8. Troubleshooting

If you encounter any issues with your power bank, refer to the table below for possible causes and solutions:

IssuePossible CauseSolution
Cannot Charge/DischargeLiquid ingressAvoid liquid; stop use if wet.
Long-term uncharged, battery depletedCharge for more than 10 minutes. If still unresponsive, the battery may be deeply discharged.
System errorLong press the button for 7 seconds to reset, then wait 5 minutes and retry.
Unsuitable ambient temperature/humidityUse at 20-30℃ and 40-60% relative humidity.
Device's USB-C port is non-standardThe power bank may not be compatible with non-standard USB-C ports.
Device does not support fast chargingCheck if the device supports fast charging.
Cable does not support fast chargingUse a fast charging cable and charger.
Slow Charging/DischargingCharging power bank while charging devicesIt is recommended to charge devices after the power bank is fully charged.
Charging multiple devices simultaneouslyThis is normal. Try charging a single device using the built-in cable.
Charging power bank while charging devicesTry charging/discharging separately.
Unsuitable ambient temperature/humidityUse at 20-30℃ and 40-60% relative humidity.
Power Bank Capacity InsufficientRated capacity based on body labelNormal conversion loss during use.
Consuming power while usingUse after charging.
Power Bank Heats UpBattery charge/discharge or circuit operationThis is normal. The product has temperature protection.
Power bank temperature too high/lowRemove charging/discharging devices and wait for the temperature to normalize.
Power bank voltage too high/low or current too largeRemove or replace the power adapter.
Digital Display Shows Abnormal IndicatorPower bank temperature too high/lowRemove charging/discharging devices and wait for the temperature to normalize.
Power bank voltage too high/low or current too largeRemove or replace the power adapter.

9. User Tips

  • For optimal fast charging, especially with devices like the Poco F5 Pro, ensure your device supports 67W fast charging and use the built-in USB-C cable or a compatible high-wattage cable.
  • Always use the built-in cable for convenience, but remember you have additional ports for multi-device charging.
  • Keep an eye on the digital display for real-time battery status and charging mode indicators.

10. Warranty and Support

The Xiaomi Power Bank 20000 67W adheres to the after-sales service regulations of the People's Republic of China, including a 12-month warranty period from the date of receipt.

Warranty Service Details:

  • Within 7 days of receipt: If a performance fault (as listed in the Product Performance Fault Table) is confirmed by a Xiaomi after-sales service center, you are eligible for a free return or exchange.
  • Within 8-15 days of receipt: If a performance fault is confirmed, you are eligible for a free exchange or repair service.
  • Within 12 months of receipt: If a performance fault is confirmed, you are eligible for a free repair service.

Non-Warranty Conditions:

The warranty does not cover damages or issues arising from:

  • Unauthorized repairs, misuse, collision, negligence, abuse, liquid damage, accidents, alterations, or incorrect use of non-product accessories.
  • Torn, altered, or counterfeit labels/markings.
  • Exceeding the warranty period.
  • Damage caused by force majeure (e.g., natural disasters).
  • Performance faults not listed in the Product Performance Fault Table.
  • Product or accessory faults caused by human factors.

Support Information:

11. Environmental Information

This product complies with national standards for hazardous substance limits in electrical and electronic products. The table below details the presence of hazardous substances in the product's components:

Component NameHazardous Substances
Lead (Pb)Mercury (Hg)Cadmium (Cd)Hexavalent Chromium (Cr(VI))PBBsPBDEsDBPBBPDEHP, DIBP
Printed Circuit Board ComponentsXOOOOOOOO
Battery PackOOOOOOOOO
CasingOOOOOOOOO
Gaskets, Tapes, and Small Structural PartsOOOOOOOOO
Charging CableOOOOOOOOO

Note 1: O indicates that the hazardous substance content in all homogeneous materials of this component is below the limit requirements specified by national standards for hazardous substances in electrical and electronic products.

Note 2: X indicates that the hazardous substance content in at least one homogeneous material of this component exceeds the limit requirements specified by national standards for hazardous substances in electrical and electronic products.

Do not dispose of batteries with household waste. Please comply with national regulations for the safe disposal of used batteries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.