1. Product Overview
The Botslab G980H is a multi-channel dash camera system designed to provide comprehensive surveillance for your vehicle. It features a 3K front camera, two side cameras, and a rear camera, offering a 560° field of view. Key features include Super Night Vision, built-in GPS, 5.8GHz Wi-Fi, voice control, and various parking monitoring modes.
1.1 Components
The main unit features a touch screen, left camera, and right camera. A separate front camera is integrated into the main unit, and a rear camera is installed separately.



1.2 What's in the Box

- Main Unit x 1
- Rear Camera x 1
- Rear Camera Cable x 1
- Car Charger x 1
- 128GB TF Card x 1
- 3M Tape x 2
- Electrostatic Film x 2
- Installation Pry Bar x 1
- User Manual x 1
- Warning Card x 1
- Quick Start Guide x 1
2. Setup and Installation
For a visual guide, please refer to the official installation video:
2.1 Preparation Before Installation
- **Remove Protective Film**: Carefully remove all protective films from the dash cam's screen and lenses.
- **Insert Memory Card**: Insert the included 128GB Micro SD card into the front camera's designated slot.
- **Format Memory Card**: To ensure proper functionality, format the SD card through the dash cam's settings menu before first use.
2.2 Mounting the Front Camera
- **Clean Windshield**: Ensure the mounting area on the windshield, right below the rearview mirror and away from any tinted sections, is clean for secure attachment.
- **Place Static Sticker**: Place one of the electrostatic films on the cleaned windshield area.
- **Attach Dash Cam**: Attach the dash cam to the static sticker using the 3M adhesive pad. Press firmly to ensure a secure hold.
- **Adjust Front Lens**: Use the camera's touchscreen to preview the field of view and adjust the front lens for the optimal angle.
2.3 Installing Side Cameras
The side cameras feature a snap-on magnetic design. Simply attach and plug them into the main unit on the left and right sides.
2.4 Connecting Power
- **Car Charger**: Plug the car charger into your vehicle's cigarette lighter.
- **Link Front Camera**: Link the front camera to its power source using the provided cable. Your power source is now connected.
2.5 Cable Management
Use the provided pry tool to neatly route the power cable along the headliner and vehicle trim, avoiding any loose areas. This ensures a clean and safe installation.
2.6 Rear Camera Setup
- **Connect Cable**: Attach the rear camera's cable to the main unit.
- **Route Cable**: Route the cable along the top of the front windshield, the A-pillar, and the vehicle chassis to the back of your car.
- **Clean Rear Glass**: Ensure the rear glass is clean for optimal adhesion.
- **Attach Rear Camera**: Attach the rear camera to the cleaned area on the rear glass. Excess cable can be routed along the interior edge of the car's rear or coiled for tidy installation.
3. Operating Instructions
3.1 APP Download and Pairing
- **Download App**: Scan the QR code provided in the Quick Start Guide or search for "Botslab" in your device's app store (iOS/Android).
- **Create Account & Log In**: Open the app, create an account, and log in.
- **First-time Pairing**: On the app homepage, you can quickly discover the device's Bluetooth. Alternatively, tap the [+] in the top-right corner, select 【Dash cam】 - 【Botslab G980H MC】 from the add-device list, and tap "Next" to search for Bluetooth connections.
- **Subsequent Pairing**: For subsequent connections, enable the 【Settings - Connect to App - Bluetooth Pairing】 function on the dash cam, then tap "Next" in the app.
- **Connect via Bluetooth List**: Select the dash cam's Bluetooth name from the list in the app to establish a connection.
- **Connect to Wi-Fi**: After selecting the corresponding function in the app, you will be prompted to connect to Wi-Fi. The G980H supports 5.8GHz Wi-Fi for faster data transfer (up to 10MB/s). Note: Wi-Fi range is 3–5 meters; remote access is not supported.
3.2 Main Interface Display
The dash cam's screen displays various information and icons:
- **LED Indicator**:
- **Solid Green**: Normal loop recording, during startup, firmware upgrade, or shutdown.
- **Green Breathing Flash (once a second)**: Parking mode recording, emergency video recording, or snapshot video recording.
- **Green Breathing Flash (every 3 seconds)**: Time-lapse recording mode or Sentry mode.
- **LED Off**: APP connected and recording stopped, in photo gallery, or other abnormalities causing recording to stop.
- **Recording Status**: A flashing red dot indicates "Recording in progress". Emergency recording triggers a flashing warning icon. Voice commands like "Video Start" also show a warning icon.
- **Right-Side Icons (from top to bottom)**:
- **Video Quality**: Shows "4K" (2160P), "3K" (1620P), or "FHD" (1080P).
- **Connection**: Bluetooth/Wi-Fi status (on/off).
- **Location**: GPS positioning status (success/failure).
- **Audio Recording**: Video audio recording function on/off.
- **Parking Monitoring**: Parking monitoring function on/off.
- **Time-Lapse/Sentry Mode**: Time-lapse recording or sentry mode function on/off.
- **Function Icons (from left to right)**: Album (view videos/photos), Settings (access recorder settings).
3.3 Screen Interaction
- **Full-Screen / Full-Frame Switching**: Slide left on the screen to hide auxiliary views for full-screen display; slide right to show auxiliary views and revert to full-frame display.
- **Screen Switching**: Double-tap the main view to cycle through recording views. Double-tap any sub-view to swap it with the main view.
- **Control Center**: Swipe down on the main recording screen to show the control menu (Emergency Recording, In-car Recording, Record Audio, One-Touch Mute, Volume Adjustment). White means on, grey means off.
3.4 Voice Control
The Botslab G980H supports hands-free voice commands for safe operation. Simply say the command to activate the function.

| Voice Command | Function Description |
|---|---|
| Video start | Start recording. |
| Take photo | Capture a photo. |
| Show front camera | Display the front-view footage. |
| Show rear camera | Display the rear-view footage. |
| Inside video on | Start recording inside the vehicle. |
| Turn on screen | Enter the screensaver interface (dim-screen or clock display). |
| Turn off screen | Exit the screensaver and return to the recording main interface. |
| Turn on audio | Enable audio recording. |
| Turn off audio | Disable audio recording. |
3.5 Parking Monitoring Modes
The G980H offers three intelligent parking modes for 24/7 continuous monitoring. A hardwire kit (sold separately) is required to enable these functions fully.

- **Collision-Detected Recording**: Automatically records 1-minute clips when a collision is detected while parked, capturing impact from all angles.
- **Sentry Mode**: The front camera detects people within 5 meters for over 5 seconds and automatically starts recording from all cameras. The system stays in standby when no activity is detected to save power and storage.
- **Time-Lapse Recording**: Records car surroundings from all angles at 1 frame per second (up to 24 hours), ensuring complete footage while efficiently saving memory. Time-lapse videos have no audio and play fast-forward.
3.6 G-Sensor Emergency Recording
When the high-precision G-sensor detects collisions or abnormal vibrations, it instantly activates emergency recording and locks the footage, preventing it from being overwritten. This provides reliable evidence for insurance claims.
3.7 Loop Recording
The dash cam supports seamless loop recording, automatically overwriting the oldest files when the memory card is full, ensuring continuous, uninterrupted driving protection. The included 128GB TF card supports approximately 4.9 hours of 4-channel recording, and the system supports up to 512GB for extended storage.
4. Maintenance
4.1 Formatting the SD Card
Regularly format the SD card (e.g., monthly) to maintain optimal recording performance and prevent data corruption. This can be done via the dash cam's settings menu.
4.2 Cleaning
Use a soft, dry cloth to clean the camera lenses and touchscreen. Avoid abrasive materials or harsh chemicals that could damage the surfaces.
4.3 Firmware Updates
Check the Botslab app periodically for available firmware updates. Keeping your dash cam's firmware up-to-date ensures you have the latest features and performance improvements.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dash cam not recording | SD card full or corrupted; power issue. | Format the SD card. Ensure continuous power supply. Check loop recording settings. |
| Wi-Fi connection issues | Out of range; incorrect settings; interference. | Ensure your phone is within 3-5 meters of the dash cam. Check Wi-Fi settings in the app and on the dash cam. Try reconnecting. |
| Parking mode not working | Hardwire kit not installed or configured. | A hardwire kit is required for full parking mode functionality. Ensure it is correctly installed and enabled in settings. |
| Voice control not responding | Language mismatch; unclear commands; feature disabled. | Ensure the dash cam's OSD language is set to English. Speak clearly and directly. Check if voice control is enabled in settings. |
| Date/Time inaccurate | GPS sync issue; manual setting needed. | Ensure GPS is active and receiving a signal. Manually set date/time in settings if auto-sync fails. |
| Cannot connect mobile to camera and Android Auto simultaneously | Bluetooth/Wi-Fi conflict. | If you need to use Android Auto, you may need a separate mobile device to connect to the dash cam app. |
| Video quality is poor | Dirty lens; low light; incorrect resolution setting. | Clean lenses. Ensure night vision is active in low light. Check video resolution settings in the app. |
5.1 Restore Defaults
If you encounter persistent issues, you can restore the dash cam to its factory settings via the system settings menu. Remember to back up any important files on the SD card before performing a reset.
6. Specifications
| Feature | Specification |
|---|---|
| Aperture | F1.8 |
| Working Temperature | –20°C to +70°C |
| Cable Length | 6.5M, 3.5M |
| Power Source | Corded electric |
| APP Compatibility | IOS, Android |
| Data Storage Capacity | 512GB MAX (128GB TF card included) |
| Built-in Screen | Yes (3.18 Inches Touchscreen) |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| Maximum Video Frame Rate | 60 fps |
| NightShot Function | Yes (940nm infrared lights, WDR) |
| Rear Camera | Yes |
| Original Package | Yes |
| Touch Screen | Yes |
| Memory Card Required Reading Speed | Class 10 |
| View Angle | Front 170°, Left 120°, Right 120°, Rear 150° (Total 560°) |
| Video Format | MP4 |
| Batteries Included | No (Super Capacitor) |
| Special Features | G-Sensor, Motion Detection, Built-in GPS, Anti Vibration, Real Time Surveillance, Wide Dynamic Range, Wi-Fi Function, Bluetooth, Voice Control, Parking Monitor, ADAS, Speed and Coordinates Recording |
| Max External Memory | 512GB |
| Number Of Lenses | 4 |
| Pixels | 800Mega (3K/4K) |
| Display Size | 3.18 Inches |
| OSD Language | Chinese (Traditional), Czech, Dutch, English, French, German, Italian, Malay, Polish, Russia, Russian, Spanish, THAI, Turkish, Vietnamese |
| GPS Logger | Internal |
| Assembly Mode | Portable Recorder |
| Item Type | Car DVR |
| Certification | CE, EAC, FCC, RoHS |
| Origin | US(Origin) |
| Interface | AV-In, AV-Out, Micro SD/TF |
7. Warranty and Support
7.1 Warranty
The Botslab G980H Dash Cam comes with a 2-year manufacturer's warranty.
7.2 Support
For technical assistance or any inquiries, please contact Botslab support:
- **Website**: https://global.botslab.com
- **Email**: service@botslab.com
- **Facebook**: Facebook@botslabofficial
You can also refer to the User Manual (PDF) for additional information.
8. User Tips
- **Voice Control Language**: Note that voice control is primarily in English. Speak clearly for optimal recognition.
- **Cable Management**: Take your time to neatly route the cables using the pry tool. A clean installation prevents loose wires and ensures safety.
- **Parking Mode**: For full 24/7 parking monitoring features (Sentry Mode, Collision-Detected, Time-Lapse), a hardwire kit is required and must be purchased separately.
- **Mobile Connectivity**: If you use Android Auto, you might need a separate mobile device to connect to the Botslab app simultaneously, as some users report conflicts.
- **Cable Length**: Verify the cable lengths provided are sufficient for your vehicle's specific model, especially for larger vehicles like SUVs, to ensure all cameras can be properly connected and routed.
- **Video Quality**: The dash cam records videos with accurate date and time stamps, which are visible in playback and useful for documentation purposes.