IROK ND68 Pro Gaming Mechanical Keyboard User Manual

1. Introduction

The IROK ND68 Pro is a high-performance 68% layout gaming mechanical keyboard designed for precision and speed. Featuring advanced magnetic switches with Hall Effect technology, an 8KHz polling rate, and a GASKET structure, it delivers an exceptional gaming experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.

2. Specifications

The IROK ND68 Pro keyboard boasts cutting-edge technology for superior performance. Key specifications are detailed below:

Image: Detailed parameter information comparing ND68 and ND68 Pro models.

Additional features include a 480MHz main control chip with 9 independent chips for simultaneous computation, ensuring responsive performance.

Image: Illustration of the 480MHz main control chip and 1+9 chipset design.

3. Setup Guide

3.1 Unpacking and Inspection

1. Carefully remove the keyboard and all accessories from the packaging.
2. Verify that all listed package contents are present: IROK ND68 Pro Keyboard, Spare Axle, Dust Cover, 8K Data Cable, and User Manual.
3. Inspect the keyboard for any visible damage.

3.2 Connecting the Keyboard

1. Locate the 8K Data Cable provided with your keyboard.
2. Connect one end of the cable to the USB-C port on the keyboard.
3. Connect the other end of the cable to an available USB port on your computer.
4. The keyboard should be automatically recognized by your operating system.

3.3 Software Installation

To unlock the full potential of your IROK ND68 Pro, including customization of lighting, key functions, and magnetic switch actuation, it is recommended to install the official software driver.

1. Visit the official SUMREDA website or the product support page to download the latest Web Driver or HUB Driver software.
2. Follow the on-screen instructions to install the software.
3. Once installed, launch the software to configure your keyboard settings.

Image: Representation of the Web-driven / Client-driven software interface.

4. Operating Instructions

4.1 Basic Keyboard Functions

The IROK ND68 Pro functions as a standard 68-key mechanical keyboard. All keys perform their labeled functions out of the box. For advanced features, refer to the sections below.

4.2 Magnetic Switches and Adjustable Actuation

The keyboard features magnetic switches with 0.001mm RT precision and dual zero dead zone adjustable continuous contact. This allows for highly customizable actuation points, which can be configured via the software driver to suit your gaming style.

Image: Visual representation of 0.001mm RT Precision.

4.3 ARGB Lighting Control

The IROK ND68 Pro features vibrant ARGB lighting with an independent IC and 500Hz high refresh rate for smooth and eye-friendly effects. Lighting modes, colors, and brightness can be customized using the software driver.

Image: Keyboard showcasing ARGB lighting with 500Hz refresh rate.

4.4 Custom Dynamic Keys and Macros

The keyboard supports various custom dynamic key functions and macros, including SOCD, TGL, MT, Key Macros, MPT, and END. These can be programmed and assigned through the software driver to enhance your gaming and productivity workflows.

Image: Illustration of custom dynamic key functions and macro support.

4.5 G-Turbo Magnetic Axis Algorithm

The keyboard utilizes a self-developed, next-gen G-Turbo magnetic axis algorithm with AI for fast and stable performance. This algorithm independently learns user habits and dynamically balances motion errors, correcting temperature drift in real-time to maintain ultra-high precision and stability over time.

Image: Diagram explaining the G-Turbo algorithm's calibration and stability features.

5. Maintenance

5.1 Cleaning the Keyboard

1. Disconnect the keyboard from your computer before cleaning.
2. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and chassis. Avoid excessive moisture.
3. For dust and debris between keycaps, use compressed air or a small brush.
4. Do not use harsh chemicals, abrasives, or solvents as they may damage the keyboard's finish.

5.2 Storing the Keyboard

When not in use for extended periods, store the keyboard in a dry, cool place away from direct sunlight and extreme temperatures. Use the provided dust cover to protect it from dust and spills.

5.3 Magnetic Switch Replacement (Hot-Swap)

The IROK ND68 Pro supports hot-swappable magnetic switches. If a switch needs replacement, gently pull the keycap off, then use a switch puller (not included, but compatible with magnetic switches) to carefully remove the switch. Insert a new compatible magnetic switch, ensuring it aligns correctly, and then reattach the keycap.

Image: View of the keyboard's hot-swappable magnetic axis switches.

6. Troubleshooting

6.1 Keyboard Not Responding

• Check Connection: Ensure the 8K Data Cable is securely connected to both the keyboard and the computer's USB port. Try a different USB port.
• Restart Computer: A simple restart can often resolve connectivity issues.
• Test on Another Device: If possible, connect the keyboard to another computer to determine if the issue is with the keyboard or your original system.

6.2 Lighting Issues (ARGB)

• Software Check: Ensure the keyboard software driver is installed and running. Verify that lighting effects are enabled and configured correctly within the software.
• Brightness: Check if the brightness setting is too low or turned off in the software.
• Reset: Some keyboards have a factory reset option for lighting. Consult the software or manufacturer's website for specific instructions.

6.3 Key Input Problems

• Debris: Check for any debris or foreign objects lodged under the affected keycap or switch. Clean with compressed air.
• Software Conflict: Ensure no other keyboard-related software or macro programs are interfering with the input.
• Switch Malfunction: If a specific key consistently fails, the magnetic switch might be faulty. Utilize the hot-swap feature to replace the switch (refer to Section 5.3).

6.4 Software Not Detecting Keyboard

• Reinstall Driver: Uninstall the current software driver and download the latest version from the official website, then reinstall.
• Administrator Privileges: Ensure you are running the software with administrator privileges.
• Firewall/Antivirus: Temporarily disable your firewall or antivirus software to check if it's blocking the software's communication with the keyboard.

7. User Tips

• Experiment with Actuation: Take advantage of the adjustable magnetic switches. Fine-tune the actuation point in the software to find the perfect balance between responsiveness for gaming and comfort for typing.
• Customize Macros: Utilize the macro capabilities (SOCD, TGL, MT, MPT, END) to create complex commands or shortcuts for your favorite games or applications. This can significantly improve efficiency.
• Personalize RGB: Explore the extensive ARGB lighting options in the software. Create unique lighting profiles for different games or moods to enhance your setup's aesthetics.
• Keep Software Updated: Regularly check the manufacturer's website for software and firmware updates. These updates often include performance improvements, new features, and bug fixes.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official SUMREDA Keyboard Store website. Keep your proof of purchase for warranty claims.